{"title":"Suspension | Honda | 92-95 Civic","description":"","products":[{"product_id":"tein-flex-z-coilover-kit-honda-civic-si-eh3-ff-1992-1995-usa","title":"TEIN FLEX Z Coilover Kit Honda Civic Si EH3 FF 1992-1995 USA","description":"\u003cp\u003eFLEx Z inherits all the features and quality of STREET FLEx but the adoption of a new platform allows its price to be set at amazingly low range. FLEx Z, of course, maintains the long-favored \"Made in Yokohama\" quality. Ride height adjustable shock absorber, fully loaded with TEIN's comprehensive technology, is now more affordable prices than ever.\u003c\/p\u003e \n\n\u003cp\u003eUntil now, all TEIN dampers can be disassembled for overhaul; Now, we introduce our new \"Sealed Structure\" for the FLEx Z. Below is a brief description of this new production process for our FLEx Z at TEIN HQ Factory in Yokohama, Japan. The top end of the shell pipe is drawn, oil \u0026amp; gas are injected then the opening is completely sealed by crimping process. This \"Sealed Structure\" process also reduces the production time, compared to the production of existing disassembable dampers. In addition, the pursuit of an efficient production system, such as the use of seam welding, allows us to drastically reduce the production cost.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -96Max Low (inch): -3.8Max High (mm): -10Max High (inch): -0.4Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8SpringRate (kgf\/mm): 10Rate (lbs\/in): 560SP PART#SW100-01175Free Length (mm): 175I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -118Max Low (inch): -4.6Max High (mm): 10Max High (inch): 0.4Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8Spring: Rate (kgf\/mm): 7Rate (lbs\/in): 392SP PART#SW070-01175Free Length (mm): 175I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicTrim: SiDrivetrain: FFChassis: EH3Motor Size: 1600Vehicle Region: USANotes:3Dr\/4Cyl\/Rr ForkTEIN Flex Z Features:Twin-Tube SystemConsidering the use of larger tires\/wheels and the lowered ride height, FLEx Z uses twin-tube system, in pursuit of ride comfort on streets.In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly. As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke.Also, low gas pressure keeps friction low. Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed.Full-Length System for Ride Height Adjustment w\/Minimal Change in RideFull-length ride height adjustment system, used for FLEx Z, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and\/or spring pre-load. This has the advantage that the change in ride quality is kept minimal when the height is adjusted.This not only makes it possible to maintain a good balance between the low-down appearance and ride comfort but also provides more setting choices for sport driving as well.Damping Force Adjustable to Change Ride to Desired SettingsFLEx Z has ever-popular 16-level damping force adjustment (comp.\/rebound together) feature with the use of needle valve.By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit driver's needs\/preferences.Use of well-reputed \"ADVANCE Needle\" at the needle valve for oil flow control secures sufficient damping force adjustable range.Compatible w\/EDFC SeriesWith EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease.Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately.Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE \/ EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of \"ADVANCE Needle\".With EDFC ACTIVE \/ EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and\/or vehicle speed, to offer a very smooth and slick ride like never before.Some models are NOT compatible with EDFC series.Smooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting WrenchFLEx Z has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs. Shell cases are treated with \"ZT Coating\", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period.FLEx Z kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1\/2in) sq. hole for attaching spinner handle and\/or torque wrench for tightening at high torque.No-Sag SpringsIncluded springs are made of high-tensile steel SAE9254 (tensile strength 200kgf\/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability.Surface is powder coated for superb protection against chipping \u0026amp; peeling, for high durability and for superior anti-corrosion performance. High-quality spring can be used under various conditions without any worry. The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.High-Spec Damper OilSpecially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions.The oil has superior anti-foaming characteristics hence the bubble cavitation and\/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":44575336792356,"sku":"Model #VSA00-CUSS1","price":1140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/TeinFlexZCoilovers_a82a51f6-6199-4fce-b143-5e5996b6a4b7.jpg?v=1676171729"},{"product_id":"tein-flex-z-coilover-kit-honda-civic-eh2-ff-1992-1995-usa","title":"TEIN FLEX Z Coilover Kit Honda Civic EH2 FF 1992-1995 USA","description":"\u003cp\u003eFLEx Z inherits all the features and quality of STREET FLEx but the adoption of a new platform allows its price to be set at amazingly low range. FLEx Z, of course, maintains the long-favored \"Made in Yokohama\" quality. Ride height adjustable shock absorber, fully loaded with TEIN's comprehensive technology, is now more affordable prices than ever.\u003c\/p\u003e \n\n\u003cp\u003eUntil now, all TEIN dampers can be disassembled for overhaul; Now, we introduce our new \"Sealed Structure\" for the FLEx Z. Below is a brief description of this new production process for our FLEx Z at TEIN HQ Factory in Yokohama, Japan. The top end of the shell pipe is drawn, oil \u0026amp; gas are injected then the opening is completely sealed by crimping process. This \"Sealed Structure\" process also reduces the production time, compared to the production of existing disassembable dampers. In addition, the pursuit of an efficient production system, such as the use of seam welding, allows us to drastically reduce the production cost.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -96Max Low (inch): -3.8Max High (mm): -10Max High (inch): -0.4Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8SpringRate (kgf\/mm): 10Rate (lbs\/in): 560SP PART#SW100-01175Free Length (mm): 175I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -118Max Low (inch): -4.6Max High (mm): 10Max High (inch): 0.4Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8Spring: Rate (kgf\/mm): 7Rate (lbs\/in): 392SP PART#SW070-01175Free Length (mm): 175I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicDrivetrain: FFChassis: EH2Motor Size: 1500Vehicle Region: USANotes:3Dr\/4Cyl\/Rr ForkTEIN Flex Z Features:Twin-Tube SystemConsidering the use of larger tires\/wheels and the lowered ride height, FLEx Z uses twin-tube system, in pursuit of ride comfort on streets.In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly. As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke.Also, low gas pressure keeps friction low. Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed.Full-Length System for Ride Height Adjustment w\/Minimal Change in RideFull-length ride height adjustment system, used for FLEx Z, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and\/or spring pre-load. This has the advantage that the change in ride quality is kept minimal when the height is adjusted.This not only makes it possible to maintain a good balance between the low-down appearance and ride comfort but also provides more setting choices for sport driving as well.Damping Force Adjustable to Change Ride to Desired SettingsFLEx Z has ever-popular 16-level damping force adjustment (comp.\/rebound together) feature with the use of needle valve.By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit driver's needs\/preferences.Use of well-reputed \"ADVANCE Needle\" at the needle valve for oil flow control secures sufficient damping force adjustable range.Compatible w\/EDFC SeriesWith EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease.Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately.Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE \/ EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of \"ADVANCE Needle\".With EDFC ACTIVE \/ EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and\/or vehicle speed, to offer a very smooth and slick ride like never before.Some models are NOT compatible with EDFC series.Smooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting WrenchFLEx Z has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs. Shell cases are treated with \"ZT Coating\", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period.FLEx Z kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1\/2in) sq. hole for attaching spinner handle and\/or torque wrench for tightening at high torque.No-Sag SpringsIncluded springs are made of high-tensile steel SAE9254 (tensile strength 200kgf\/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability.Surface is powder coated for superb protection against chipping \u0026amp; peeling, for high durability and for superior anti-corrosion performance. High-quality spring can be used under various conditions without any worry. The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.High-Spec Damper OilSpecially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions.The oil has superior anti-foaming characteristics hence the bubble cavitation and\/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":44575337120036,"sku":"Model #VSA00-CUSS1","price":1140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/TeinFlexZCoilovers_d41d3a8d-6ce8-4894-8c46-9136ca412150.jpg?v=1676171742"},{"product_id":"tein-mono-sport-coilover-kit-honda-civic-si-eh3-ff-1992-1995-usa","title":"TEIN MONO SPORT Coilover Kit Honda Civic Si EH3 FF 1992-1995 USA","description":"\u003cp\u003eThe main concept of MONO SPORT is to provide driving pleasures to all drivers. All the different needs and demands are carefully analyzed to come up with the most suitable settings for each and every vehicle models. For cars often running on circuit, the settings are focused more on sport driving. MONO SPORT offers not only the precise steering feel that strongly appeals to sport-minded drivers, but also the flexible movement. MONO SPORT is set up to let the drivers enjoy the runs on circuits and\/or winding roads and everyday driving on streets with the damping force adjusted. For cars requiring comfortable ride more than anything, touring settings are applied to provide and maintain the finest ride comfort which are often lost when the vehicle is lowered and\/or larger tires\/wheels are used. MONO SPORT offers the finest and most comfortable ride feel that makes even a long-distance driving seem like a breeze.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -114Max Low (inch): -4.5Max High (mm): -19Max High (inch): -0.7Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8SpringRate (kgf\/mm): 16Rate (lbs\/in): 896SP PART#SA160-01150Free Length (mm): 150I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -50Recommended Ride Height (inch): -2Ride Height Adjustable Range: Max Low (mm): -113Max Low (inch): -4.4Max High (mm): 24Max High (inch): 0.9Recommended Low (mm): -60Recommended Low (inch): -2.4Recommended High (mm): -40Recommended High (inch): -1.6Spring: Rate (kgf\/mm): 9Rate (lbs\/in): 504SP PART#SA090-01150Free Length (mm): 150I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicTrim: SiDrivetrain: FFChassis: EH3Motor Size: 1600Vehicle Region: USANotes:3Dr\/4Cyl\/Rr ForkTEIN MONO SPORT Features:Mono-Tube Structure to Deliver Rich Information from Road SurfaceMono tube structure of MONO SPORT completely separates the oil chamber and the gas chamber and hence aeration does not occur.This enables stable generation of linear damping force, reacting to the finest changes in road surfaces, even when running aggressively and repeatedly on circuits. The superior-quality MONO SPORT offers capability for the most delicate control of the vehicle and for the deepest level of communication with the roads. Exclusively-designed urethane bump rubber absorbs and softens the compression impact effectively, maintaining ride comfort when going over gaps etc and preventing the damper from bottoming out. Full-Length System for Ride Height Adjustment w\/ Minimal Change in RideFull-length ride height adjustment system, used for MONO SPORT, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and\/or spring pre-load.This has the advantage that the change in ride quality is kept minimal when the height is adjusted. Newly-Designed Upright Strong Tube for Strut Type SuspensionsFor strut type suspensions, which require high lateral stiffness, the world's first triple- tube-structured \"\"Upright Strong Tube\"\" is newly adopted. It reduces friction with the use of revised internal lubrication method. Damping force adjustment knob attached to the top of the shock absorber allows easier access and makes the installation of EDFC motors (optional) a breeze. Waterproofing process, which is a must for inverted types, is reduced\/simplified greatly.16-level Damping Force Adjustment (Comp.\/Rebound Together) + ADVANCE M.S.V.MONO SPORT comes with the well-established 16-level damping force adjustment feature (compression \u0026amp; rebound together) and equipped with exclusively-designed \"ADVANCE M.S.V.\".\"ADVANCE M.S.V.\"\" is a sub-valve system composed of a combination of 2 mechanisms; \"ADVANCE Needle\" to increase the damping force adjustable range and \"M.S.V. (Micro Speed Valve)\" to elimitate unwanted decline of damping force in micro speed range. Both these components are redesigned exclusively for MONO SPORT. With the use of \"ADVANCE M.S.V.\", damping force adjustable range is made about three times wider, yet superior damping force characteristics are maintained in all parts to improve steering response, road ability and traction performance.Compatible with EDFC SeriesWith EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease. Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately. Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE \/ EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of \"ADVANCE M.S.V. \". With EDFC ACTIVE \/ EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and\/or vehicle speed, to offer very smooth and slick ride like never before. Some models are NOT compatible with EDFC series.)Smooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting WrenchMONO SPORT has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs. Shell cases are treated with \"ZT Coating\", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period. MONO SPORT kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1\/2in) sq. hole for attaching spinner handle and\/or torque wrench for tightening at high torque.No-Sag SpringIncluded springs are made of high-tensile steel SAE9254 (tensile strength 200kgf\/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability.Surface is powder coated for superb protection against chipping \u0026amp; peeling, for high durability and for superior anti-corrosion performance. High-quality spring can be used under various conditions without any worry.The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.High-Spec Damper OilSpecially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions.The oil has superior anti-foaming characteristics hence the bubble cavitation and\/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":44575341838628,"sku":"Model #GSA00-7USS1","price":1910.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/tein-monosport_e5846b9f-e38b-495b-b095-4709e09a5e2f.jpg?v=1676171906"},{"product_id":"tein-mono-sport-coilover-kit-honda-civic-eh2-ff-1992-1995-usa","title":"TEIN MONO SPORT Coilover Kit Honda Civic EH2 FF 1992-1995 USA","description":"\u003cp\u003eThe main concept of MONO SPORT is to provide driving pleasures to all drivers. All the different needs and demands are carefully analyzed to come up with the most suitable settings for each and every vehicle models. For cars often running on circuit, the settings are focused more on sport driving. MONO SPORT offers not only the precise steering feel that strongly appeals to sport-minded drivers, but also the flexible movement. MONO SPORT is set up to let the drivers enjoy the runs on circuits and\/or winding roads and everyday driving on streets with the damping force adjusted. For cars requiring comfortable ride more than anything, touring settings are applied to provide and maintain the finest ride comfort which are often lost when the vehicle is lowered and\/or larger tires\/wheels are used. MONO SPORT offers the finest and most comfortable ride feel that makes even a long-distance driving seem like a breeze.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -114Max Low (inch): -4.5Max High (mm): -19Max High (inch): -0.7Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8SpringRate (kgf\/mm): 16Rate (lbs\/in): 896SP PART#SA160-01150Free Length (mm): 150I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -50Recommended Ride Height (inch): -2Ride Height Adjustable Range: Max Low (mm): -113Max Low (inch): -4.4Max High (mm): 24Max High (inch): 0.9Recommended Low (mm): -60Recommended Low (inch): -2.4Recommended High (mm): -40Recommended High (inch): -1.6Spring: Rate (kgf\/mm): 9Rate (lbs\/in): 504SP PART#SA090-01150Free Length (mm): 150I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicDrivetrain: FFChassis: EH2Motor Size: 1500Vehicle Region: USANotes:3Dr\/4Cyl\/Rr ForkTEIN MONO SPORT Features:Mono-Tube Structure to Deliver Rich Information from Road SurfaceMono tube structure of MONO SPORT completely separates the oil chamber and the gas chamber and hence aeration does not occur.This enables stable generation of linear damping force, reacting to the finest changes in road surfaces, even when running aggressively and repeatedly on circuits. The superior-quality MONO SPORT offers capability for the most delicate control of the vehicle and for the deepest level of communication with the roads. Exclusively-designed urethane bump rubber absorbs and softens the compression impact effectively, maintaining ride comfort when going over gaps etc and preventing the damper from bottoming out. Full-Length System for Ride Height Adjustment w\/ Minimal Change in RideFull-length ride height adjustment system, used for MONO SPORT, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and\/or spring pre-load.This has the advantage that the change in ride quality is kept minimal when the height is adjusted. Newly-Designed Upright Strong Tube for Strut Type SuspensionsFor strut type suspensions, which require high lateral stiffness, the world's first triple- tube-structured \"\"Upright Strong Tube\"\" is newly adopted. It reduces friction with the use of revised internal lubrication method. Damping force adjustment knob attached to the top of the shock absorber allows easier access and makes the installation of EDFC motors (optional) a breeze. Waterproofing process, which is a must for inverted types, is reduced\/simplified greatly.16-level Damping Force Adjustment (Comp.\/Rebound Together) + ADVANCE M.S.V.MONO SPORT comes with the well-established 16-level damping force adjustment feature (compression \u0026amp; rebound together) and equipped with exclusively-designed \"ADVANCE M.S.V.\".\"ADVANCE M.S.V.\"\" is a sub-valve system composed of a combination of 2 mechanisms; \"ADVANCE Needle\" to increase the damping force adjustable range and \"M.S.V. (Micro Speed Valve)\" to elimitate unwanted decline of damping force in micro speed range. Both these components are redesigned exclusively for MONO SPORT. With the use of \"ADVANCE M.S.V.\", damping force adjustable range is made about three times wider, yet superior damping force characteristics are maintained in all parts to improve steering response, road ability and traction performance.Compatible with EDFC SeriesWith EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease. Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately. Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE \/ EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of \"ADVANCE M.S.V. \". With EDFC ACTIVE \/ EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and\/or vehicle speed, to offer very smooth and slick ride like never before. Some models are NOT compatible with EDFC series.)Smooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting WrenchMONO SPORT has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs. Shell cases are treated with \"ZT Coating\", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period. MONO SPORT kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1\/2in) sq. hole for attaching spinner handle and\/or torque wrench for tightening at high torque.No-Sag SpringIncluded springs are made of high-tensile steel SAE9254 (tensile strength 200kgf\/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability.Surface is powder coated for superb protection against chipping \u0026amp; peeling, for high durability and for superior anti-corrosion performance. High-quality spring can be used under various conditions without any worry.The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.High-Spec Damper OilSpecially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions.The oil has superior anti-foaming characteristics hence the bubble cavitation and\/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":44575342199076,"sku":"Model #GSA00-7USS1","price":1910.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/tein-monosport_053f72d8-505c-4d19-a6a2-398f9e08d8f4.jpg?v=1676171918"},{"product_id":"tein-street-basis-z-coilover-kit-honda-civic-eh2-ff-1992-1995-usa-model-gsa00-8uss2","title":"TEIN STREET BASIS Z Coilover Kit Honda Civic EH2 FF 1992-1995 USA","description":"\u003cp\u003eThe Tein STREET BASIS Z Coilover System combines affordability and comfort packaged into a masterfully constructed suspension system. These coilovers utilize a Twin-Tube setup that when compared to the regular mono-tube systems, these twin-tube systems attain longer stroke with a smaller repulsive force, resulting in increased ride comfort. Thanks to this unique characteristic, you can negotiate gaps and bumps steadily on rough roads, meaning a smooth ride at low speed and stability at high speeds.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: NFull-Length Ride-Height Adjustable: NUpper Mount: OEMRecommended Ride Height (mm): -75Recommended Ride Height (inch): -3Ride Height Adjustable Range: Max Low (mm): -129Max Low (inch): -5.1Max High (mm): -44Max High (inch): -1.7Recommended Low (mm): -85Recommended Low (inch): -3.3Recommended High (mm): -65Recommended High (inch): -2.6SpringRate (kgf\/mm): 9Rate (lbs\/in): 504SP PART#SB090-13200Free Length (mm): 200I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: NFull-Length Ride-Height Adjustable: NUpper Mount: OEMRecommended Ride Height (mm): -65Recommended Ride Height (inch): -2.6Ride Height Adjustable Range: Max Low (mm): -107Max Low (inch): -4.2Max High (mm): -41Max High (inch): -1.6Recommended Low (mm): -75Recommended Low (inch): -3Recommended High (mm): -55Recommended High (inch): -2.2Spring: Rate (kgf\/mm): 3Rate (lbs\/in): 168SP PART#SY030-13225Free Length (mm): 225I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicDrivetrain: FFChassis: EH2Motor Size: 1500Vehicle Region: USANotes:3Dr\/4Cyl\/Rr ForkFeatures:Steel ConstructionTwin Tube internal constructionThread Type Ride Height AdjustmentUtilizes OEM Mounts16 way adjustable dampers, compression and rebound combinedHigh Durability and ReliabilityAnodized brackets with Teflon coated shock body for heavy duty rust prevention\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":45649244586276,"sku":"Model #GSA00-8USS2","price":820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Tein_Street_Basis_Z_3b39304a-350a-4a35-a7fc-a04555b933f5.jpg?v=1688441818"},{"product_id":"tein-street-advance-z-coilover-kit-honda-civic-si-eh3-ff-1992-1995-usa-model-gsa00-9uss2","title":"TEIN STREET ADVANCE Z Coilover Kit Honda Civic Si EH3 FF 1992-1995 USA","description":"\u003cp\u003eThe TEIN STREET ADVANCE Z damper is the evolution of the popular Super Street coilover. Developed to provide a sporty ride feeling and aggressive stance, along with wide-range damping force adjustment using our new Advance Needle technology, giving the driver a much more noticeable feel in damping force change. The shortened shell case design provides optimum damper stroke at lower than standard vehicle ride height. Vehicle ride height is adjustable via the ZT coated threaded sleeve. The unique ZT Coating surface treatment on the ride height adjustment thread is abrasion resistant against gravel\/debris, and further enhances its corrosion resistance. Each STREET ADVANCE Z has updated internal components and external coatings increase durability and product life. STREET ADVANCE Z dampers are great for daily driving and spirited driving for all types of drivers.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: NUpper Mount: OEMRecommended Ride Height (mm): -75Recommended Ride Height (inch): -3Ride Height Adjustable Range: Max Low (mm): -129Max Low (inch): -5.1Max High (mm): -44Max High (inch): -1.7Recommended Low (mm): -85Recommended Low (inch): -3.3Recommended High (mm): -65Recommended High (inch): -2.6SpringRate (kgf\/mm): 9Rate (lbs\/in): 504SP PART#SB090-13200Free Length (mm): 200I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: NUpper Mount: OEMRecommended Ride Height (mm): -65Recommended Ride Height (inch): -2.6Ride Height Adjustable Range: Max Low (mm): -107Max Low (inch): -4.2Max High (mm): -41Max High (inch): -1.6Recommended Low (mm): -75Recommended Low (inch): -3Recommended High (mm): -55Recommended High (inch): -2.2Spring: Rate (kgf\/mm): 3Rate (lbs\/in): 168SP PART#SY030-13225Free Length (mm): 225I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicTrim: SiDrivetrain: FFChassis: EH3Motor Size: 1600Vehicle Region: USANotes:Rr: Interior Needs To Be Removed, Modified And\/Or Relocated To Avoid Interference With The Motor. 3Dr\/4Cyl\/Rr ForkFeatures:Steel ConstructionTwin Tube internal constructionLarger piston diameter for strut type front and rear (22mm)16-Way Damping Adjustable with over 200% increase in damping force change.Ride Height adjustable via spring seatPowder coated damper bodyNon-welded ZT coated Adjustment TubeFull-Length Dust Boots1-piece Aluminum Spring Seat with Delrin Thrust WasherOne Year Warranty Against Manufacturer s DefectsEDFC Compatible\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":45649244619044,"sku":"Model #GSA00-9USS2","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Tein_Street_Advance_Z_d571cb07-d576-45b9-afac-aae1abeac093.jpg?v=1688441819"},{"product_id":"tein-mono-sport-coilover-kit-honda-civic-si-eh3-ff-1992-1995-usa-model-gsa00-7uss1","title":"TEIN MONO SPORT Coilover Kit Honda Civic Si EH3 FF 1992-1995 USA","description":"\u003cp\u003eThe main concept of MONO SPORT is to provide driving pleasures to all drivers. All the different needs and demands are carefully analyzed to come up with the most suitable settings for each and every vehicle models. For cars often running on circuit, the settings are focused more on sport driving. MONO SPORT offers not only the precise steering feel that strongly appeals to sport-minded drivers, but also the flexible movement. MONO SPORT is set up to let the drivers enjoy the runs on circuits and\/or winding roads and everyday driving on streets with the damping force adjusted. For cars requiring comfortable ride more than anything, touring settings are applied to provide and maintain the finest ride comfort which are often lost when the vehicle is lowered and\/or larger tires\/wheels are used. MONO SPORT offers the finest and most comfortable ride feel that makes even a long-distance driving seem like a breeze.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -114Max Low (inch): -4.5Max High (mm): -19Max High (inch): -0.7Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8SpringRate (kgf\/mm): 16Rate (lbs\/in): 896SP PART#SA160-01150Free Length (mm): 150I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -50Recommended Ride Height (inch): -2Ride Height Adjustable Range: Max Low (mm): -113Max Low (inch): -4.4Max High (mm): 24Max High (inch): 0.9Recommended Low (mm): -60Recommended Low (inch): -2.4Recommended High (mm): -40Recommended High (inch): -1.6Spring: Rate (kgf\/mm): 9Rate (lbs\/in): 504SP PART#SA090-01150Free Length (mm): 150I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicTrim: SiDrivetrain: FFChassis: EH3Motor Size: 1600Vehicle Region: USANotes:3Dr\/4Cyl\/Rr ForkTEIN MONO SPORT Features:Mono-Tube Structure to Deliver Rich Information from Road SurfaceMono tube structure of MONO SPORT completely separates the oil chamber and the gas chamber and hence aeration does not occur.This enables stable generation of linear damping force, reacting to the finest changes in road surfaces, even when running aggressively and repeatedly on circuits. The superior-quality MONO SPORT offers capability for the most delicate control of the vehicle and for the deepest level of communication with the roads. Exclusively-designed urethane bump rubber absorbs and softens the compression impact effectively, maintaining ride comfort when going over gaps etc and preventing the damper from bottoming out. Full-Length System for Ride Height Adjustment w\/ Minimal Change in RideFull-length ride height adjustment system, used for MONO SPORT, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and\/or spring pre-load.This has the advantage that the change in ride quality is kept minimal when the height is adjusted. Newly-Designed Upright Strong Tube for Strut Type SuspensionsFor strut type suspensions, which require high lateral stiffness, the world's first triple- tube-structured \"\"Upright Strong Tube\"\" is newly adopted. It reduces friction with the use of revised internal lubrication method. Damping force adjustment knob attached to the top of the shock absorber allows easier access and makes the installation of EDFC motors (optional) a breeze. Waterproofing process, which is a must for inverted types, is reduced\/simplified greatly.16-level Damping Force Adjustment (Comp.\/Rebound Together) + ADVANCE M.S.V.MONO SPORT comes with the well-established 16-level damping force adjustment feature (compression \u0026amp; rebound together) and equipped with exclusively-designed \"ADVANCE M.S.V.\".\"ADVANCE M.S.V.\"\" is a sub-valve system composed of a combination of 2 mechanisms; \"ADVANCE Needle\" to increase the damping force adjustable range and \"M.S.V. (Micro Speed Valve)\" to elimitate unwanted decline of damping force in micro speed range. Both these components are redesigned exclusively for MONO SPORT. With the use of \"ADVANCE M.S.V.\", damping force adjustable range is made about three times wider, yet superior damping force characteristics are maintained in all parts to improve steering response, road ability and traction performance.Compatible with EDFC SeriesWith EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease. Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately. Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE \/ EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of \"ADVANCE M.S.V. \". With EDFC ACTIVE \/ EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and\/or vehicle speed, to offer very smooth and slick ride like never before. Some models are NOT compatible with EDFC series.)Smooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting WrenchMONO SPORT has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs. Shell cases are treated with \"ZT Coating\", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period. MONO SPORT kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1\/2in) sq. hole for attaching spinner handle and\/or torque wrench for tightening at high torque.No-Sag SpringIncluded springs are made of high-tensile steel SAE9254 (tensile strength 200kgf\/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability.Surface is powder coated for superb protection against chipping \u0026amp; peeling, for high durability and for superior anti-corrosion performance. High-quality spring can be used under various conditions without any worry.The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.High-Spec Damper OilSpecially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions.The oil has superior anti-foaming characteristics hence the bubble cavitation and\/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":45649244651812,"sku":"Model #GSA00-7USS1","price":1910.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/tein-monosport_bb6f870f-c1fc-4c9d-bb1a-8d5f5d998280.jpg?v=1688441823"},{"product_id":"tein-flex-z-coilover-kit-honda-civic-si-eh3-ff-1992-1995-usa-model-vsa00-cuss1","title":"TEIN FLEX Z Coilover Kit Honda Civic Si EH3 FF 1992-1995 USA","description":"\u003cp\u003eFLEx Z inherits all the features and quality of STREET FLEx but the adoption of a new platform allows its price to be set at amazingly low range. FLEx Z, of course, maintains the long-favored \"Made in Yokohama\" quality. Ride height adjustable shock absorber, fully loaded with TEIN's comprehensive technology, is now more affordable prices than ever.\u003c\/p\u003e \n\n\u003cp\u003eUntil now, all TEIN dampers can be disassembled for overhaul; Now, we introduce our new \"Sealed Structure\" for the FLEx Z. Below is a brief description of this new production process for our FLEx Z at TEIN HQ Factory in Yokohama, Japan. The top end of the shell pipe is drawn, oil \u0026amp; gas are injected then the opening is completely sealed by crimping process. This \"Sealed Structure\" process also reduces the production time, compared to the production of existing disassembable dampers. In addition, the pursuit of an efficient production system, such as the use of seam welding, allows us to drastically reduce the production cost.\u003c\/p\u003e \n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -96Max Low (inch): -3.8Max High (mm): -10Max High (inch): -0.4Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8SpringRate (kgf\/mm): 10Rate (lbs\/in): 560SP PART#SW100-01175Free Length (mm): 175I.D. (mm): ID70Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: P\/URecommended Ride Height (mm): -55Recommended Ride Height (inch): -2.2Ride Height Adjustable Range: Max Low (mm): -118Max Low (inch): -4.6Max High (mm): 10Max High (inch): 0.4Recommended Low (mm): -65Recommended Low (inch): -2.6Recommended High (mm): -45Recommended High (inch): -1.8Spring: Rate (kgf\/mm): 7Rate (lbs\/in): 392SP PART#SW070-01175Free Length (mm): 175I.D. (mm): ID70Fitment:Year: 1992-1995Make: HondaModel: CivicTrim: SiDrivetrain: FFChassis: EH3Motor Size: 1600Vehicle Region: USANotes:3Dr\/4Cyl\/Rr ForkTEIN Flex Z Features:Twin-Tube SystemConsidering the use of larger tires\/wheels and the lowered ride height, FLEx Z uses twin-tube system, in pursuit of ride comfort on streets.In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly. As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke.Also, low gas pressure keeps friction low. Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed.Full-Length System for Ride Height Adjustment w\/Minimal Change in RideFull-length ride height adjustment system, used for FLEx Z, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and\/or spring pre-load. This has the advantage that the change in ride quality is kept minimal when the height is adjusted.This not only makes it possible to maintain a good balance between the low-down appearance and ride comfort but also provides more setting choices for sport driving as well.Damping Force Adjustable to Change Ride to Desired SettingsFLEx Z has ever-popular 16-level damping force adjustment (comp.\/rebound together) feature with the use of needle valve.By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit driver's needs\/preferences.Use of well-reputed \"ADVANCE Needle\" at the needle valve for oil flow control secures sufficient damping force adjustable range.Compatible w\/EDFC SeriesWith EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease.Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately.Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE \/ EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of \"ADVANCE Needle\".With EDFC ACTIVE \/ EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and\/or vehicle speed, to offer a very smooth and slick ride like never before.Some models are NOT compatible with EDFC series.Smooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting WrenchFLEx Z has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs. Shell cases are treated with \"ZT Coating\", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period.FLEx Z kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1\/2in) sq. hole for attaching spinner handle and\/or torque wrench for tightening at high torque.No-Sag SpringsIncluded springs are made of high-tensile steel SAE9254 (tensile strength 200kgf\/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability.Surface is powder coated for superb protection against chipping \u0026amp; peeling, for high durability and for superior anti-corrosion performance. High-quality spring can be used under various conditions without any worry. The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.High-Spec Damper OilSpecially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions.The oil has superior anti-foaming characteristics hence the bubble cavitation and\/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.\u003c\/p\u003e\n\n\n \n\n \u003cp\u003eImages are for marketing purposes only. Actual item may vary\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Proposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":45649245208868,"sku":"Model #VSA00-CUSS1","price":1140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/TeinFlexZCoilovers_42eca009-3c15-4ce0-ad67-1a3c60c523f1.jpg?v=1688441828"},{"product_id":"stance-xr1-monotube-coilovers-honda-civic-eg-92-95-model-st-eg-xr1","title":"Stance XR1 Monotube Coilovers Honda Civic EG 92-95","description":"\u003cp\u003eStance xR1 Coilovers feature Stance's Inverted Monotube Design. Originally designed for use in professional motorsports, inverted monotube technology has many advantages over upright monotube dampers. Stance's 45mm strut shaft offers increased lateral rigidity over competitor's upright dampers that use 20mm shafts. If the shaft is not stiff enough it can cause the damper to bind under heavy loads and limit the suspension travel -eading to premature wear on the shaft seals and piston bands, causing oil leakage. Stance inverted monotube dampers offer exceptional ride comfort without sacrificing performance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Inverted Monotube DesignFront Spring Rate:16KG\/150MMRear Spring Rate:12KG\/150MMDurable Electrodeposition CoatingEasy InstallationDigressive DampingRubber Dust Boots and Bump StopsFitmentHonda Civic EG 92-95Note(s)For any questions regarding these coilovers or other products please contact a Vivid Racing Performance SpecialistPictures are for marketing purposes only, actual product may vary.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":45649246585124,"sku":"Model #ST-EG-XR1","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/XR1_a1.jpg?v=1688441834"},{"product_id":"stance-xr1-monotube-coilovers-honda-civic-92-95-model-st-fg2-xr1","title":"Stance XR1 Monotube Coilovers Honda Civic 92-95","description":"\u003cp\u003eStance xR1 Coilovers feature Stance's Inverted Monotube Design. Originally designed for use in professional motorsports, inverted monotube technology has many advantages over upright monotube dampers. Stance's 45mm strut shaft offers increased lateral rigidity over competitor's upright dampers that use 20mm shafts. If the shaft is not stiff enough it can cause the damper to bind under heavy loads and limit the suspension travel -eading to premature wear on the shaft seals and piston bands, causing oil leakage. Stance inverted monotube dampers offer exceptional ride comfort without sacrificing performance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Inverted Monotube DesignFront Spring Rate:16KG\/150mmRear Spring Rate:12KG\/150mmDurable Electrodeposition CoatingEasy InstallationDigressive DampingRubber Dust Boots and Bump StopsFitmentHonda Civic 92-95Note(s)For any questions regarding these coilovers or other products please contact a Vivid Racing Performance SpecialistPictures are for marketing purposes only, actual product may vary.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":45649249861924,"sku":"Model #ST-FG2-XR1","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/XR1_a1_a8e4fd4e-b6e7-4a24-8d12-34159e9800d5.jpg?v=1688441838"},{"product_id":"solo-werks-s1-coilover-system-honda-civic-92-95-model-s1hd002","title":"Solo Werks S1 Coilover System - Honda Civic 92-95","description":"\u003cp\u003eSolo Werks S1 Height Adjustable Coilover KitFeatures:Heavy Gold Zinc Plated Housings for superb corrosion resistanceProgressive elastomer bumpstopsBlack spring perches - double lock ring designPlatform Specific Spring Rates and Matched Valving 3 year Limited Warranty\u003c\/p\u003e\n\n\u003cp\u003eFitment:Honda Civic Coupe, Hatchback, Sedan 92-95\u003c\/p\u003e\n\n\u003cp\u003eNote(s)Pictures used for marketing purposes only. Actual product may vary.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Solo Werks Inc","offers":[{"title":"Default Title","offer_id":45649250189604,"sku":"Model #S1HD002","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/S1AU004-00__14721.1534637894.1280.1280.jpg?v=1688441842"},{"product_id":"skunk2-pro-st-coilovers-honda-civic-acura-integra-92-01-model-541-05-8720","title":"Skunk2 Pro-ST Coilovers Honda Civic | Acura Integra 92-01","description":"\u003cp\u003eSkunk2 Racing's Pro-ST Coilovers for '92-'95 Civic and '94-'01 Integra are engineered as the best single adjustable suspension system on the market at a price point you can afford!\u003c\/p\u003e\n\n\u003cp\u003eSerious club racers and discerning high performance street car owners agree that the Pro-ST's 12 way dampening, mono-tube design, threaded shock bodies with independent height\/ spring pre-load adjustment, and billet top mounts w\/ polyurethane bushings give them all the control they need at the track without sacrificing ride quality on the street.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Spring Rates (Front \/ Rear): 10 kg\/mm \/ 10 kg\/mm.Mono-Tube Design12-Way Adjustable DampeningIndependent Pre-Load\/ Ride-Height AdjustmentsReduced Shaft Stroke for Full Suspension Travel on Lowered VehiclesBillet Aluminum Spring PerchesCNC Wound SAE9254V Racing Springs\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":45649252122916,"sku":"Model #541-05-8720","price":1105.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/541-05-8720.jpg?v=1688441856"},{"product_id":"skunk2-pro-s-coilovers-honda-civic-92-95-model-541-05-4720","title":"Skunk2 Pro S Coilovers Honda Civic 92-95","description":"\u003cp\u003eSkunk2 Pro S Coilovers Honda Civic 92-95\u003c\/p\u003e \n\n\u003cp\u003eSkunk2 Racing works to build the highest quality and best performing aftermarket parts for sport compact cars. Skunk2 Racing products are designed for enthusiasts by enthusiasts. Drawing on nearly a decade of experience in the sport compact industry, they are able to create products that cater to the needs of the true enthusiast. As part of their commitment to continually build the best products, Skunk2 Racing remains actively involved in various forms of motor sports. Racing provides Skunk2 with the data necessary to produce high performance parts utilizing innovative design, advanced metal alloys, cutting-edge manufacturing methods, and stringent quality control measures. All Skunk2 Racing products are carefully planned and designed using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state of the art equipment. Furthermore, each product is subjected to rigorous road and race testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars around the world rely on Skunk2 Racing products.\u003c\/p\u003e\n\n\u003cp\u003eSkunk2 Pro-Series high performance coilovers are based on over a decade of racing and suspension tuning experience. The advanced technology we have used in numerous road racing and drag racing championships is now being applied to our new line of Pro-Series coilover suspensions. The Skunk2 track and street tested valving offers the perfect balance for the daily drive or for spirited performance driving. Pro-Series coilovers feature shortened shock bodies and shortened shaft strokes so suspension travel can be maintained on lowered vehicles for improved performance and comfort. With Skunk2 coilovers, enthusiasts can quickly and precisely set ride heights and corner weights to improve the handling response, cornering ability, stability, and balance. Skunk2 offers their full coilover suspension in nonadjustable dual-tube PRO-S design, or our PRO-C adjustable mono-tube design. Skunk2 coilovers include hard anodized CNC-machined forged 6061-T6 spring perches and Skunk2 CNC-wound racing springs made from SAE9254V spring steel.\u003c\/p\u003e\n\n\u003cp\u003eThe Pro-Series line of products have always been known to set the benchmark for performance, and they are the product that hardcore enthusiast demand. The Pro-S Coilover will redefine suspension performance just as it did with Camshaft technology. Pro-S dampers are the perfect basic high-performance full coilover suspension. Pro-S dampers are designed for drivers who are seeking an integrated coilover and shock set-up. Pro-S dampers feature pre-determined precision valving and carefully selected springs that are designed to dramatically improve handling performance by significantly increasing corner grip and reducing body roll, allowing the driver to feel greater control and stability at all speeds. Skunk2 springs are CNC-wound using the highest quality SAE9254V spring steel. Each spring is designed to optimize the balance between performance and comfort, and are custom matched to PRO-S dampers. PRO-S dampers provide an average drop from 1??_ to 3??_ for a sporty yet aggressive look. The Pro-S suspension offers dramatic improvements to handling while retaining an entry-level price.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003cbr\u003e\nDual tube designNon-adjustable precision valvingShortened shock body and strokeAdjustable ride heightOne piece machined bodiesUses factory upper mountSome kits include forged mountsSAE9254V Racing springs\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":45649254678820,"sku":"Model #541-05-4720","price":817.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/skunk2-coilovers-pros2_3c229a02-7a2c-481d-b7cd-b282b92f9de2.jpg?v=1688441863"},{"product_id":"silvers-neomax-coilover-kit-honda-civic-5-eg-usdm-rear-fork-1992-1995-model-sh1002","title":"Silver's NEOMAX Coilover Kit Honda Civic 5 EG USDM (Rear Fork) 1992-1995","description":"\u003cp\u003eSilver's NEOMAX Coilover's are perfect for street driving, and still outperform most on the track. The Silver's NEOMAX coilovers are a monotube shock, independently height adjustable, with 24 levels of dampening adjustment, and come with an 18-month warranty.\u003c\/p\u003e\n\n\u003cp\u003eSilver's NEOMAX Coilover Kit Features:Mono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance. Adjustable T6 6061 front camber plates on all McPherson style applications. 24 levels of dampening adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every dampening adjustment in the driver's seat. High strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube. 44mm linear characteristic internal piston provides maximum dampening response for ultimate performance while simultaneously giving a comfortable ride. High viscosity IP F.A. 5W damper oil ensures the best efficiency of shock-absorption and dampening control. Height adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel. Cold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus. Powder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for ease of installation. Anodized T6 6061 aluminum lower mounts for multilink suspension systems to lower un-sprung weight. 18 Month limited manufacturer's warranty.Default Spring Rates: Front 12K, Rear 6K\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n \u003cp\u003eSilvers Suspension #NH101-1\u003c\/p\u003e\n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Silvers Suspension","offers":[{"title":"Default Title","offer_id":45649255989540,"sku":"Model #SH1002","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/s14-1.png?v=1688441876"},{"product_id":"silvers-neomax-coilover-kit-honda-civic-5-eg-jdm-rear-eye-1992-1995-model-sh1001","title":"Silver's NEOMAX Coilover Kit Honda Civic 5 EG JDM (Rear Eye) 1992-1995","description":"\u003cp\u003eSilver's NEOMAX Coilover's are perfect for street driving, and still outperform most on the track. The Silver's NEOMAX coilovers are a monotube shock, independently height adjustable, with 24 levels of dampening adjustment, and come with an 18-month warranty.\u003c\/p\u003e\n\n\u003cp\u003eFeatures: Mono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance. Adjustable T6 6061 front camber plates on all McPherson style applications. 24 levels of dampening adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every dampening adjustment in the driver's seat. High strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube. 44mm linear characteristic internal piston provides maximum dampening response for ultimate performance while simultaneously giving a comfortable ride. High viscosity IP F.A. 5W damper oil ensures the best efficiency of shock-absorption and dampening control. Height adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel. Cold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus. Powder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for ease of installation. Anodized T6 6061 aluminum lower mounts for multilink suspension systems to lower un-sprung weight. 18 Month limited manufacturer's warranty.Default Spring Rates: Front 12K, Rear 6K\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n \u003cp\u003eSilvers Suspension #NH101\u003c\/p\u003e\n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Silvers Suspension","offers":[{"title":"Default Title","offer_id":45649256579364,"sku":"Model #SH1001","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/s14-1_f3422b60-5467-4fa7-a581-c74f4762756c.png?v=1688441881"},{"product_id":"silvers-neomax-2-way-suspension-honda-civic-5-eg-usdm-1992-1995-model-sh1002-2w","title":"Silver's NEOMAX 2-Way Suspension Honda Civic 5 EG USDM 1992-1995","description":"\u003cp\u003eSilver's NEOMAX Coilover's are perfect for street driving, and still outperform most on the track. The Silver's NEOMAX coilovers are a monotube shock, independently height adjustable, with 24 levels of dampening adjustment, and come with an 18-month warranty.\u003c\/p\u003e\n\n\u003cp\u003eSilver's NEOMAX Coilover Kit Features:Adjustable T6 6061 front camber plates on all McPherson style applications.Koyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.24 levels of dampening adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every dampening adjustment in the driver?s seat.High strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.44mm piston with digressive style valving characteristics provides maximum low speed damping response for ultimate performance while simultaneously giving a comfortable ride.Mono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance.High viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock-absorption and dampening control.Height adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.Cold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus.Powder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for seamless installation.Anodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.18 Month limited manufacturer?s warranty.Default Spring Rates: Front 12k Rear 6kFitment:Honda Civic 5 EG USDM 1992-1995\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Silvers Suspension","offers":[{"title":"Default Title","offer_id":45649257038116,"sku":"Model #SH1002-2W","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/SA1014-2W.jpg?v=1688441885"},{"product_id":"silvers-neomax-2-way-suspension-honda-civic-5-eg-jdm-1992-1995-model-sh1001-2w","title":"Silver's NEOMAX 2-Way Suspension Honda Civic 5 EG JDM 1992-1995","description":"\u003cp\u003eSilver's NEOMAX Coilover's are perfect for street driving, and still outperform most on the track. The Silver's NEOMAX coilovers are a monotube shock, independently height adjustable, with 24 levels of dampening adjustment, and come with an 18-month warranty.\u003c\/p\u003e\n\n\u003cp\u003eSilver's NEOMAX Coilover Kit Features:Adjustable T6 6061 front camber plates on all McPherson style applications.Koyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.24 levels of dampening adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every dampening adjustment in the driver?s seat.High strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.44mm piston with digressive style valving characteristics provides maximum low speed damping response for ultimate performance while simultaneously giving a comfortable ride.Mono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance.High viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock-absorption and dampening control.Height adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.Cold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus.Powder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for seamless installation.Anodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.18 Month limited manufacturer?s warranty.Default Spring Rates: Front 12k Rear 6kFitment:Honda Civic 5 EG JDM 1992-1995\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Silvers Suspension","offers":[{"title":"Default Title","offer_id":45649257759012,"sku":"Model #SH1001-2W","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/SA1014-2W_d69ef34e-be7a-41de-a29b-cc4f1750137a.jpg?v=1688441889"},{"product_id":"st-suspensions-xa-height-rebound-adjustable-coilover-kit-honda-civic-coupe-sedan-1992-1995-model-18250002","title":"ST Suspensions XA Height \u0026 Rebound Adjustable Coilover Kit Honda Civic Coupe, Sedan 1992-1995","description":"\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\n\u003cp\u003ePerfect for sporty driving\u003cbr\u003e\nST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\n\u003cp\u003eEasy lowering adjustment\u003cbr\u003e\nLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\n\u003cp\u003eKW Engineering: Exclusive for ST suspension\u003cbr\u003e\nThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:External damper adjustmentLatest damping technology for maximum longevityReduced system friction for effective damping adjustmentIndividual lowering within the TUV-tested adjustment rangeFront and rear axle (when possible) with thread adjustmentGalvanized coilover struts with additional coating for an optimized corrosion protectionComplete solution with adjustable spring plate, race spring system and bumpers with dust protectionFitment:Honda Civic Coupe, Sedan 1992-1995Installation Manual\u003cbr\u003e\nSetup Manual\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ST suspensions","offers":[{"title":"Default Title","offer_id":45649260020004,"sku":"Model #18250002","price":1309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ST-18210028.png?v=1688441893"},{"product_id":"st-suspensions-x-height-adjustable-coilover-kit-honda-civic-coupe-sedan-1-5-1-6-4cyl-1992-1995-model-13250002","title":"ST Suspensions X Height Adjustable Coilover Kit Honda Civic Coupe, Sedan 1.5-1.6 (4cyl.) 1992-1995","description":"\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\n\u003cp\u003eImproved driving dynamics and handling\u003cbr\u003e\nDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eLowering with StTyle: the ST X coiloversIndividual lowering within the tested adjustment rangeFront and rear axle thread adjustment (when possible)Galvanized coilover struts with additional coating for optimized corrosion protectionComplete solution with adjustable spring plate, race spring system and bumpers with dust protectionPowerful twin-tube dampers with high-quality components for maximum longevityFront Lowering: 1.6\" to 3\"Rear Lowering: 1.6\" to 3\"Fitment:Honda Civic Coupe, Sedan 1.5-1.6 (4cyl.) 1992-1995\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ST suspensions","offers":[{"title":"Default Title","offer_id":45649261887780,"sku":"Model #13250002","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/13250002.jpg?v=1688441894"},{"product_id":"revel-touring-sport-damper-honda-civic-1992-1995-model-1tr3cdhn001","title":"Revel Touring Sport Damper Honda Civic 1992-1995","description":"\u003cp\u003eThe 32 way adjustable Revel Touring Sports Damper is the ideal solution for the most comfortable ride in a coilover kit while achieving an extremely low ride height and utilizing the perfect balance of dampening forces and spring rates to deliver smooth performance when it is needed.\u003c\/p\u003e\n\n\u003cp\u003eSpring rates are perfectly balanced between comfort and sport like feel for optimum ride quality. Full length thread body with independant preload allows for max lowering. Larger piston valves and oil capacity allows for a faster reacting dampening force and efficiency through all temperature ranges. High strength and rigidity brackets ensure the driver has the utmost confidence for all driving types.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Front Spring Rate: 10KAluminum Upper Mount (With Rubber Bushing)Rear Spring Rate: 8KAluminum Upper Mount (With Rubber Bushing)\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n \u003cp\u003eRevel #rvl1TR3CDHN001\u003c\/p\u003e\n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Revel","offers":[{"title":"Default Title","offer_id":45649263296804,"sku":"Model #1TR3CDHN001","price":1405.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/1TR3CDHN001.jpg?v=1688441897"},{"product_id":"megan-racing-ezii-series-coilover-damper-kit-acura-integra-honda-civic-1992-2001-model-mr-cdk-hc92-ezii","title":"Megan Racing EZII Series Coilover Damper Kit Acura Integra | Honda Civic 1992-2001","description":"\u003cp\u003eMegan Racing really prides itself in keeping the community involved in every aspect of development. Through loyal participation in attending race events, the team supports and collaborates with active members of the racing community who, in turn, offers direct invaluable feedback after real world and on-track testing. Furthermore, each product is vigorously tested inside in-house facilities and controlled variable scenarios.\u003c\/p\u003e\n\n \u003cp\u003eWe take the community's feedback to heart and has incorporated many ideas and concepts from our automotive family across the world to develop performance parts for hard-to-find applications. Working with the newest factories and the most competitive sources in the market allows us to remain at the forefront of product development. A true automotive enthusiast sees potential in almost every car on the road, and with that we have developed parts for over 5,000 different applications in various makes and models, both Domestic and Imported.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:15 way adjustableRubber insulated top mounts front \u0026amp; rear10kg front \u0026amp; 5kg rearFitment:Acura Integra 1994-2001 Excluding Type RHonda Civic 1992-2000\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":45649263919396,"sku":"Model #MR-CDK-HC92-EZII","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/MR-CDK-HC92-EZII1.jpg?v=1688441903"},{"product_id":"zeal-super-function-coilovers-honda-civic-92-95-model-60zs024sf","title":"Zeal Super Function Coilovers Honda Civic 92-95","description":"\u003cp\u003eZeal Super Function Coilovers Honda Civic 92-95\u003c\/p\u003e\n\n\u003cp\u003eBlack and blue with a super lightweight aluminum body (strut-type uses steel shell casing) and lightweigx-Coil (new) SpringThis is the top-of-the-line model amongst the Function Series. The shockebound\/compression settings are made with the hard-user using semi-slick tires in mind. Circuit spec, aluminum DIV free piston stabilizes rebound\/compression levels as well as increases life. Pillow ball mounts included. Springtes arxclusive. All Super Function Coilovers are single, normal monotube.\u003c\/p\u003e\n\n\u003cp\u003eSpringte:\u003cbr\u003e\nFront: 14 kg\/mm\u003cbr\u003e\nRear: 10 kg\/mm\u003c\/p\u003e\n\n\u003cp\u003eSpringngth: 178mm\u003c\/p\u003e\n\n\u003cp\u003eAvailable in:\u003cbr\u003e\nType A: 6-Way Damping Adjustable\u003cbr\u003e\nType B: 30-Way Damping Adjustable.\u003c\/p\u003e\n\n\u003cp\u003ePlease select Coilover Type below.\u003c\/p\u003e\n\n\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649264476452,"sku":"Model #60ZS024SF","price":4165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/zeal-coilovers-super-function.jpg?v=1688441911"},{"product_id":"zeal-function-xs-coilovers-honda-civic-92-95-model-10zs024xs","title":"Zeal Function-Xs Coilovers Honda Civic 92-95","description":"\u003cp\u003eZeal Functixs Coilovers Honda Civic 92-95\u003c\/p\u003e\n\n\u003cp\u003eFor thext generation street user, we've developed the Functixs Series. The Functixs is now born and is currently the most popular street application in Japan. With advanced damping capabilities in effect, our efforts have recently focused towards our new x-Coil Hyper Spring. Through consistent and progressive research anxperience, we've improved Springality to achieve an even smoother and more responsive feel and ride. The ability to grasp precise road data has improved. Tx-Coil Springhievexactly this. Our Dynamometer Data proves this with stable rebound and compression levels (within a 0.1 Meter Per Second range) for level travel at very low speeds, very high speeds, and everything in between. By keeping very detailed, precision Springtion in mind, we are able to set the shocks piston valving to superior levels. The combination of the shockd Spring superior. Our Linear Springtion with no Friction Loss is superior and the shockn be adjusted precisely (Functixs includes 6-Way Damping Adjustability). Lightweight aluminum upper mounts, Springat preload and Springat lock, height-adjustable lower brackets and lock seats (for non-strut type applications) include a durable, Alumite finish for rust proof characteristics. Steel shell casing includes a special chromate plating for rust proof characteristics also. Adjustable brackets are newly designed and slender. Driving feel is amazing for the street-user. MacPherson Strut-Type are specifically systems are produced as an inverted-monotube type.\u003c\/p\u003e\n\n\u003cp\u003eSpringte:\u003cbr\u003e\nFront: 10 kg\/mm\u003cbr\u003e\nRear: 7 kg\/mm\u003c\/p\u003e\n\n\u003cp\u003eSpringngth: 178mm\u003c\/p\u003e\n\n\u003cp\u003eKey Features:Those seeking to improve handling on the street.Those who want to be able to fine tune their suspension on the streetIndependent Height Adjustability6-Way Damping AdjustableSingle Monotube Type *1Overhaul OKDamping Setting Change OK\u003c\/p\u003e\n\n\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649265033508,"sku":"Model #10ZS024XS","price":2675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/zeal-coilovers-function-xs-1.jpg?v=1688441920"},{"product_id":"zeal-function-xs-aluminum-coilovers-honda-civic-92-95-model-zf-xsa-436672","title":"Zeal Function-Xs Aluminum Coilovers Honda Civic 92-95","description":"\u003cp\u003eZeal coilover suspension systems use the originally developed X-Coil spring. This height adjustable coilover kit has been designed to capitalize on the very linear characteristics of the X-Coil spring. As such, internal valving has been set to new levels of precision. The Function-Xs has 6 levels of damping adjustment and features independent lower brackets for height adjustment. Due to its architecture, changing the damping setting is simple. The specially plated shock body prevents rust. Aluminum versions keep the units lightweight. All strut type suspension types use a reverse monotube design coilover.\u003c\/p\u003e\n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649265393956,"sku":"Model #ZF-XSA-436672","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/zeal-coilovers-function-xs_ee836b27-a5f6-4944-a4c8-c0876b083acd.jpg?v=1688441929"},{"product_id":"zeal-function-x-coilovers-honda-civic-92-95-model-10zs024x3","title":"Zeal Function-X Coilovers Honda Civic 92-95","description":"\u003cp\u003eZeal Function-X Coilovers Honda Civic 92-95\u003c\/p\u003e\n\n\u003cp\u003eFor the next generation hard user, we�ve developed the Function-X Series. The Function-X is now born and is currently the most popular race application amongst the ZEAL line-up. With advanced damping capabilities in effect, our efforts have recently focused towards our new �X-Coil Hyper Spring�. Through consistent and progressive research and experience, we�ve improved spring quality to achieve an even smoother and more responsive feel and ride. The ability to grasp precise road data has improved. The X-Coil spring achieves exactly this. Our Dynamometer Data proves this with stable rebound and compression levels (within a 0.1 Meter Per Second range) for level travel at very low speeds, very high speeds, and everything in between. By keeping very detailed, precision spring motion in mind, we are able to set the shock�s piston valving to superior levels. The combination of the shock and spring is superior. Our Linear Spring Motion with no Friction Loss is superior and the shock can be adjusted very precisely (Function-X includes 30-Way Damping Adjustability), thus the setting levels have broadened and can be fine-tuned with advanced precision and feel. Lightweight aluminum upper mounts, spring seat preload and spring seat locks, height-adjustable lower brackets and lock seats (for non-strut type applications) include a durable, Alumite finish for rust proof characteristics. Steel shell casing includes a special chromate plating for rust proof characteristics also. Adjustable brackets are newly designed and slender. Driving feel is amazing for the hard-user. MacPherson Strut-Type systems are specifically produced as an inverted-monotube type.\u003c\/p\u003e \n\n\u003cp\u003eSpring Rate:\u003cbr\u003e\nFront: 12 kg\/mm\u003cbr\u003e\nRear: 9 kg\/mm\u003c\/p\u003e\n\n\u003cp\u003eSpring Length: 178mm\u003c\/p\u003e\n\n\u003cp\u003eKey FeatureThose seeking to improve handling on the trackThose who want to be able to fine tune their suspension for the trackIndependent Height Adjustability30-Way Damping AdjustableSingle Monotube Type *1Overhaul OKdamping Setting Change OK\u003c\/p\u003e\n\n\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649265623332,"sku":"Model #10ZS024X3","price":3220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/zeal-coilovers-function-x-2.jpg?v=1688441936"},{"product_id":"zeal-function-x-aluminum-coilovers-honda-civic-92-95-model-zf-xa-816112","title":"Zeal Function-X Aluminum Coilovers Honda Civic 92-95","description":"\u003cp\u003eFor the next generation hard user, we ve developed the Function-x Aluminum Series. The Function-xAluminum is now born and is currently the most popular race application amongst the ZEAL line-up. With advanced damping capabilities in effect, our efforts have recently focused towards our new x-Coil Hyper Spring. Through consistent and progressive research and experience, we ve improved spring quality to achieve an even smoother and more responsive feel and ride. The ability to grasp precise road data has improved. The x-Coil spring achieves exactly this. Our Dynamometer Data proves this with stable rebound and compression levels (within a 0.1 Meter Per Second range) for level travel at very low speeds, very high speeds, and everything in between. By keeping very detailed, precision spring motion in mind, we are able to set the shock's piston valving to superior levels. The combination of the shock and spring is superior. Our Linear Spring Motion with no Friction Loss is superior and the shock can be adjusted very precisely (Function-x includes 30-Way Damping Adjustability), thus the setting levels have broadened and can be fine-tuned with advanced precision and feel. Lightweight aluminum upper mounts, spring seat preload and spring seat locks, height-adjustable lower brackets and lock seats (for non-strut type applications) include a durable, Alumite finish for rust proof characteristics. Steel shell casing includes a special chromate plating for rust proof characteristics also. Adjustable brackets are newly designed and slender. Driving feel is amazing for the hard-user. MacPherson Strut-Type systems are specifically produced as an inverted-monotube type.\u003c\/p\u003e \n\n\u003cp\u003eSpring Rate:\u003cbr\u003e\nFront: 12 kg\/mm\u003cbr\u003e\nRear: 10 kg\/mm\u003c\/p\u003e\n\n\u003cp\u003eSpring Length:\u003cbr\u003e\nFront: 203mm\u003cbr\u003e\nRear: 215mm\u003c\/p\u003e\n\n\u003cp\u003eKey FeatureThose seeking to improve handling on the trackThose who want to be able to fine tune their suspension for the trackIndependent Height Adjustability30-Way Damping AdjustableSingle Monotube Type *1Overhaul OKdamping Setting Change OK\u003c\/p\u003e\n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649267065124,"sku":"Model #ZF-XA-816112","price":3490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/zeal-coilovers-function-x_2a360737-4ae8-43af-958a-418a67184a53.jpg?v=1688441942"},{"product_id":"zeal-function-t-x-coil-steel-6-way-rigid-coilovers-honda-civic-92-95-model-zf-tx6r-352937","title":"Zeal Function-T X-Coil Steel 6-Way Rigid Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-T Coilover is a highly customizable, nickel-boron plated steel coilover. Different from existing chrome plating products, it is much more anti-corrosive and practically eliminates the spring seat seizing to the adjustable brackets. Optional X-R Coil springs utilize the newfound performance of the Function-T. Both 6 and 30 levels of adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse-monotube design coilover.\u003c\/p\u003e \n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649268113700,"sku":"Model #ZF-TX6R-352937","price":2650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_FunctionT.jpg?v=1688441948"},{"product_id":"zeal-function-t-x-coil-steel-6-way-pillow-coilovers-honda-civic-92-95-model-zf-tx6p-566228","title":"Zeal Function-T X-Coil Steel 6-Way Pillow Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-T Coilover is a highly customizable, nickel-boron plated steel coilover. Different from existing chrome plating products, it is much more anti-corrosive and practically eliminates the spring seat seizing to the adjustable brackets. Optional X-R Coil springs utilize the newfound performance of the Function-T. Both 6 and 30 levels of adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse-monotube design coilover.\u003c\/p\u003e \n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649268670756,"sku":"Model #ZF-TX6P-566228","price":3190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_FunctionT_ad19abc0-9cbd-4543-b09c-a0e3744a3a45.jpg?v=1688441955"},{"product_id":"zeal-function-t-x-coil-steel-30-way-rigid-coilovers-honda-civic-92-95-model-zf-tx30r-277650","title":"Zeal Function-T X-Coil Steel 30-Way Rigid Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-T Coilover is a highly customizable, nickel-boron plated steel coilover. Different from existing chrome plating products, it is much more anti-corrosive and practically eliminates the spring seat seizing to the adjustable brackets. Optional X-R Coil springs utilize the newfound performance of the Function-T. Both 6 and 30 levels of adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse-monotube design coilover.\u003c\/p\u003e \n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649269227812,"sku":"Model #ZF-TX30R-277650","price":3190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_FunctionT_e332f595-c561-4daf-8a58-22f0e27ab599.jpg?v=1688441961"},{"product_id":"zeal-function-t-x-coil-steel-30-way-pillow-coilovers-honda-civic-92-95-model-zf-tx30p-569399","title":"Zeal Function-T X-Coil Steel 30-Way Pillow Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-T Coilover is a highly customizable, nickel-boron plated steel coilover. Different from existing chrome plating products, it is much more anti-corrosive and practically eliminates the spring seat seizing to the adjustable brackets. Optional X-R Coil springs utilize the newfound performance of the Function-T. Both 6 and 30 levels of adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse-monotube design coilover.\u003c\/p\u003e \n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649269817636,"sku":"Model #ZF-TX30P-569399","price":3730.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_FunctionT_afbe82c6-8d0b-4040-88f1-d2f25a1db26d.jpg?v=1688441967"},{"product_id":"zeal-function-a-x-coil-aluminum-6-way-rigid-coilovers-honda-civic-92-95-model-zfa-xa6r-543351","title":"Zeal Function-A X-Coil Aluminum 6-Way Rigid Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-A coilover is highly customizable, all aluminum built, and plated in nickel-boron. The nickel-boron plating gives this coilover a rigid structure, increasing resistance to abrasion and high temperatures. The low frictional properties of boron also allow a more direct damping action. Optional X-Coil-R springs utilize the newfound performance of the super light weight Function-A. Both 6 and 30 levels of damping adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse monotube design coilover.\u003c\/p\u003e\n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649270472996,"sku":"Model #ZFA-XA6R-543351","price":3315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_Function-A_Coilovers.jpg?v=1688441969"},{"product_id":"zeal-function-a-x-coil-aluminum-6-way-pillow-coilovers-honda-civic-92-95-model-zfa-xa6p-809191","title":"Zeal Function-A X-Coil Aluminum 6-Way Pillow Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-A coilover is highly customizable, all aluminum built, and plated in nickel-boron. The nickel-boron plating gives this coilover a rigid structure, increasing resistance to abrasion and high temperatures. The low frictional properties of boron also allow a more direct damping action. Optional X-Coil-R springs utilize the newfound performance of the super light weight Function-A. Both 6 and 30 levels of damping adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse monotube design coilover.\u003c\/p\u003e\n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649270964516,"sku":"Model #ZFA-XA6P-809191","price":3855.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_Function-A_Coilovers_dc9c2df3-74e6-4b26-bed2-ce82f4a80873.jpg?v=1688441971"},{"product_id":"zeal-function-a-x-coil-aluminum-30-way-rigid-coilovers-honda-civic-92-95-model-zfa-xa30r-363041","title":"Zeal Function-A X-Coil Aluminum 30-Way Rigid Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-A coilover is highly customizable, all aluminum built, and plated in nickel-boron. The nickel-boron plating gives this coilover a rigid structure, increasing resistance to abrasion and high temperatures. The low frictional properties of boron also allow a more direct damping action. Optional X-Coil-R springs utilize the newfound performance of the super light weight Function-A. Both 6 and 30 levels of damping adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse monotube design coilover.\u003c\/p\u003e\n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649271521572,"sku":"Model #ZFA-XA30R-363041","price":3855.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_Function-A_Coilovers_6388685b-11da-4b2b-8152-aff7da25742f.jpg?v=1688441972"},{"product_id":"zeal-function-a-x-coil-aluminum-30-way-pillow-coilovers-honda-civic-92-95-model-zfa-xa30p-888511","title":"Zeal Function-A X-Coil Aluminum 30-Way Pillow Coilovers Honda Civic 92-95","description":"\u003cp\u003eThe Function-A coilover is highly customizable, all aluminum built, and plated in nickel-boron. The nickel-boron plating gives this coilover a rigid structure, increasing resistance to abrasion and high temperatures. The low frictional properties of boron also allow a more direct damping action. Optional X-Coil-R springs utilize the newfound performance of the super light weight Function-A. Both 6 and 30 levels of damping adjustment are available. Custom spring rates are available for your own custom Function coilovers. All strut type suspensions use a reverse monotube design coilover.\u003c\/p\u003e\n\n\u003cp\u003eStreet Spring Rates:Front: 10.00Rear: 7.00\u003cbr\u003e\nHard Spring Rates:Front: 12.00Rear: 9.00\u003cbr\u003e\nSpring Length:Front: 7in [178mm]Rear: 7in [178mm]\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Zeal","offers":[{"title":"Default Title","offer_id":45649272602916,"sku":"Model #ZFA-XA30P-888511","price":4395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/Zeal_Function-A_Coilovers_a166c461-c110-4e28-bd5f-21667c3309f6.jpg?v=1688441974"},{"product_id":"truhart-streetplus-coilover-kit-honda-civic-92-00-model-th-h802","title":"TruHart StreetPlus Coilover Kit Honda Civic 92-00","description":"\u003cp\u003eThe TruHart StreetPlus Coilover system is a full monotube design coilover with integrated aluminum top mounts. The StreetPlus coilover is an ideal solution for today's budget-minded tuner looking to lower their vehicle and increase handling performance. The independently adjustable lower mount allows fine tuning of a vehicle's height without sacrificing shock travel, resulting in a sporty yet comfortable ride on the street or strip. These coilovers do not have damper adjustments.\u003c\/p\u003e \n\n\u003cp\u003eFitment:Twin Tube Shock DesignSeparate Pre-Load SpringAdjustable mount for ride height adjustmentPowder Coated shock bodies \u0026amp; Anodized Lock Rings for durabilityTop-Hats or Camber Top-Plates included where applicableFitment: Honda Civic 92-00Notes:Pictures Used For Marketing Purposes Only, Actual Product May VaryFor Any Questions, Please Contact a Vivid Racing Performance Specialist\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":45649273618724,"sku":"Model #TH-H802","price":640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/TH-H807.jpg?v=1688441975"},{"product_id":"truhart-drag-spec-coilovers-honda-civic-92-00-model-th-h802-dr","title":"TruHart Drag Spec Coilovers Honda Civic 92-00","description":"\u003cp\u003eTruHart Drag Spec Series coilovers are designed to increase off the line traction while allowing height adjustment with out sacrificing shock travel. Specially designed spring rates allows for a stiffer rear spring to allow you to put power down to the pavement quicker.\u003c\/p\u003e\n\n\u003cp\u003eDuring normal launching conditions, weight is transfered from the front to the back. That instant transfer cause the rear springs to compress and spin the tires, desperately trying to get traction. The stiffer rear spring prevents that harsh compression for improved launch times and gets you going down the line quicker.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Includes Upper MountsAdjustable Lower MountsSold as a Complete Set - 2 Fronts, 2 Rears7.2kg\/mm Front Spring Rate18kg\/mm Rear Spring RateFitment: Honda Civic 92-00Notes:Pictures Used For Marketing Purposes Only, Actual Product May VaryFor Any Questions, Please Contact a Vivid Racing Performance Specialist\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":45649275486500,"sku":"Model #TH-H802-DR","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/TH-H801-DR.jpg?v=1688441977"},{"product_id":"truhart-basic-coilover-kit-honda-civic-92-00-model-th-h702","title":"TruHart Basic Coilover Kit Honda Civic 92-00","description":"\u003cp\u003eTruHart brings a full coilover into the reach of even the most budget oriented tuner. The TruHart Basic Coilovers offer an inexpensive way to lower your vehicle by the exact amount you want. They also will give your car more handling performance from the increased spring and damper rates over your stock ones. In addition, these coilovers feature a zinc coated strut that helps prevent corrosion from the elements. Not to mention, all TruHart coilovers come with a full 2 year manufacturer warranty. That's a better warranty than 90% of the competition.\u003c\/p\u003e\n\n\u003cp\u003eFitment:Great Entry Level Full Coilover SystemZinc Coating Protects Against CorrosionApplication Specific Valving and Spring Rates Allows for Sporty and Comfortable RideAdjustable Ride HeightRequires Use of OEM Mount2 Year Limited WarrantyFitment: Honda Civic 92-00Notes:Pictures Used For Marketing Purposes Only, Actual Product May VaryFor Any Questions, Please Contact a Vivid Racing Performance Specialist\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":45649276469540,"sku":"Model #TH-H702","price":480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/TH-H701.jpg?v=1688441978"},{"product_id":"megan-racing-coilovers-hi-low-acura-integra-honda-civic-crx-delsol-1988-2000-model-mr-co-hc88","title":"Megan Racing Coilovers Hi-Low Acura Integra | Honda Civic | CRX | DelSol 1988-2000","description":"\u003cp\u003eConstructed of 6061 CNC Machined aluminum sleeves and SAE 9254 Cold Wound Steel coil springs, the coil-over system is designed for competition as well as high-performance street use. The higher spring rate in the suspension drastically improves handling of the vehicle in turns, reduces wheel hop and improves weight transfer during hard acceleration.\u003c\/p\u003e\n\n\u003cp\u003eFeatures: Adjustable from 0-3\" drop, the coil over suspension also improves the appearance of your car by reducing fender gap between the wheel and the body of your car. Featuring hard-plastic caps to prevent shock failure and priced well below our competitors, Megan Racing coil-over kits prove you don't have to spend a fortune for high-performance and quality. Fitment:Acura Integra 1990-2000Honda Civic | CRX | DelSol 1988-2000Note:Upgraded shocks are recommended for cars lowered more than 2.25\"\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":45649277026596,"sku":"Model #MR-CO-HC88","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/MR-CO-HC88.jpg?v=1688441982"},{"product_id":"ksport-version-rr-road-race-coilover-kit-honda-acura-1992-2001-model-chd020-rr","title":"Ksport Version RR Road Race Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eThe Ksport Version RR Road Race Coilovers were carefully designed for road racing. The system features aggressive spring rates and shock valving for maximum handling and performance with acute reaction and unparalleled responsiveness on the track. Integrated with 36 levels of damping adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications, the Ksport Version RR Road Race Coilover Kit is the ultimate suspension system for serious road racing.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Built for RacingUpgraded Shock Bumpstops36-Way Adjustable DampingAerospace Quality Aluminum ComponentsAdjustable Spring Perch for Height AdjustmentAdjustable Lower Mount Allowing Maximum Suspension TravelAll Metal Pillowball for Added Strength and ResponsivenessMonotube High Pressure Design Reduces Oil LeakageCamber Adjustment on Many ModelsPillowball Top Mount for Increased Steering FeelDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 20\u003cbr\u003e\nRear Spring Rates(kg\/mm): 18\u003c\/p\u003e\n\n\u003cp\u003eFitments:Acura Integra DC2 1994-2001Honda Del Sol 1992-1995Honda Civic 1992-1995Note: Ksport Version RR kits are built to order - please allow 2-3 weeks for production and delivery.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649277583652,"sku":"Model #CHD020-RR","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil4_b9862c1c-a263-4f58-a07d-58ff8983d306.jpg?v=1688441983"},{"product_id":"ksport-version-dr-drag-race-coilover-kit-honda-acura-1992-2001-model-chd020-dr","title":"Ksport Version DR Drag Race Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eThe Version DR Drag Race Coilovers are the ultimate in suspension technology for serious drag racing enthusiasts and professionals. These Drag Racing Coilovers are built off our race proven Version RR Road Race Coilovers with internal changes to accommodate the rigors of drag racing. All Version DR kits are custom valved for drag racing with appropriate spring rates chosen to maximize traction and regulate weight transfer. With proven performance on the drag strip, the Ksport Version DR Drag Race Coilover Kit will reduce Elapsed Time and 60 Ft times making it the ideal suspension system for serious drag race vehicles.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Spring Rates and Shock Valving Specific for Drag Racing36-Way Adjustable DampingAerospace Quality Aluminum ComponentsAdjustable Spring Perch for Height AdjustmentAdjustable Lower Mount Allowing Maximum Suspension TravelCamber Adjustment on Many ModelsPillowball Top Mount for Increased Steering FeelMonotube High Pressure Design Reduces Oil LeakageAdvanced Pillowball MountsDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 8.7\u003cbr\u003e\nRear Spring Rates(kg\/mm): 9.8\u003c\/p\u003e\n\n\u003cp\u003eFitments:Acura Integra DC2 1994-2001Honda Civic 1992-1995Note: Ksport Version DR kits are built to order - please allow 2-3 weeks for production and delivery.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649278173476,"sku":"Model #CHD020-DR","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil1.jpg?v=1688441985"},{"product_id":"ksport-kontrol-sport-coilover-kit-honda-acura-1992-2001-model-chd020-sp","title":"Ksport Kontrol Sport Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eAn enhanced version of our top selling Kontrol Pro Coilover System, the Ksport Kontrol Sport Fully Adjustable Coilovers provide the ultimate in suspension technology both on the street or at the track. These coilovers build off the key features of our top selling system, including 36 levels of damping adjustment for fine tuning, and adds 30% stiffer valving and spring rates to deliver the same quality with a more aggressive and direct feel. This results in tighter cornering and quicker response times, making the Kontrol Sport Coilover Kit an ideal system for aggressive street and intermediate track use.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:36-Way Adjustable DampingMonotube High Pressure Design Reduces Oil LeakageCamber Adjustment on Many ModelsAdjustable Spring Perch for Height AdjustmentPillowball Top Mount for Increased Steering FeelAerospace Quality Aluminum ComponentsAdjustable Lower Mount Allowing Maximum Suspension TravelDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 12\u003cbr\u003e\nRear Spring Rates(kg\/mm): 6.3\u003c\/p\u003e\n\n\u003cp\u003eFitments:Acura Integra DC2 1994-2001Honda Del Sol 1993-1997Honda Civic EG 1992-1995Note: Ksport Kontrol Sport kits are built to order - please allow 2-3 weeks for production and delivery.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649278796068,"sku":"Model #CHD020-SP","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil1_b0500663-1c15-4fbd-acee-381373b72185.jpg?v=1688441987"},{"product_id":"ksport-kontrol-pro-coilover-kit-honda-acura-1992-2001-model-chd020-kp","title":"Ksport Kontrol Pro Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eKsport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your vehicle, both on the street or at the track. 36 levels of damping adjustment allow fine tuning of the damper to suit both handling and comfort needs. The damping adjustment alters compression and rebound simultaneously, for more effective and user-friendly setup changes.\u003c\/p\u003e\n\n\u003cp\u003ePillowball Top Mounts: Pillow ball top mounts in the front and rear on some applications allow the vehicle to install and setup to OEM specifications. Ksport's patented upper pillow ball mount offers the same level of adjustability and performance but allows for compliance that is often required from high-demand strut applications.On applicable models, the pillowball upper mounts offer camber adjustment, saving the need for a special, separate camber kit. For enthusiasts seeking the ultimate in adjustability, Ksport's advanced upper pillow ball mount is available on some applications, giving the option for separate camber and caster adjustment.\u003c\/p\u003e\n\n\u003cp\u003eAdjustable Lower Mounts: Most applications utilize an adjustable lower mount, which means height adjustability without losing suspension travel - a problem found in many coilover systems available today. Since mounts and most pieces in the coilover system are designed from 6061 billet aluminum, the components are lightweight, durable, and rust resistant.\u003c\/p\u003e\n\n\u003cp\u003eProtection Against Corrosion: Steel shock bodies are electroplated with zinc to resist rust and protect from the elements. The shock or strut valving for each piece is matched accordingly to the spring rate, giving superior ride quality and reliability.\u003c\/p\u003e\n\n\u003cp\u003eSuperior Ride Quality \u0026amp; Reliability: The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube construction, the Monotube design dissipates heat faster and more evenly, allows finer damping adjustments, and requires more expensive design process. Aeration and cavitation issues are a lot less common in a Monotube design, which results in a more consistent ride quality. The Ksport Kontrol Pro Coilover system has been designed with professional road racing in mind, offering extremely high value and performance for any application.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:36-Way Adjustable DampingCollars and Upper Mounts Made from 6061 Aluminum with T6 for Increased HardnessAdjustable Spring Perch for Height AdjustmentAdjustable Lower Mount Allowing Maximum Suspension TravelCamber Adjustment on Many ModelsPillowball Top Mount for Increased Steering FeelMonotube High Pressure Design Reduces Oil LeakageElectroplated Body for Added Protection from Corrosion and RustDust Boot to Protect Damper Seal12 Month Limited WarrantyFront Spring Rates(kg\/mm): 9.8\u003cbr\u003e\nRear Spring Rates(kg\/mm): 5\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic EG 1992-1995Acura Integra DC2 1994-2001Honda Del Sol 1993-1997\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649279353124,"sku":"Model #CHD020-KP","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil30.jpg?v=1688441991"},{"product_id":"ksport-kontrol-plus-2-way-coilover-kit-honda-acura-1992-2001-model-chd020-p2","title":"Ksport Kontrol Plus 2 Way Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eThe Ksport Kontrol Plus 2-Way Coilovers provide the ultimate in adjustability for enthusiasts and professionals seeking the maximum in performance and durability. With years of engineering, testing and development, this coilover system has been perfected in virtually every facet of motorsports, ranging from drifting to time attack or circuit driving.\u003c\/p\u003e\n\n\u003cp\u003eThe key component to these coilovers is the utilization of remote reservoirs that provide separate adjustments for rebound and compression, as well as nitrogen gas pressure. Additionally, added oil capacity provided by the remote reservoirs increase the system's ability to dissipate heat, which leads to improved performance over long periods, such as endurance or tarmac racing, in addition to consistent performance throughout long heat cycles. These features, paired with 55mm monotube shocks, ensure maximum durability and consistent performance.\u003c\/p\u003e\n\n\u003cp\u003eA variety of external hardware components are available on the Kontrol Plus 2-Way Coilovers to completely customize the system to your vehicle. When fitting this kit to your vehicle, upper mounts are available in rubber form, pillowball or Ksport's award winning advanced pillowball mounts that offer camber and caster adjustment. To further ensure complete customization and performance, each system has been dyno tested individually and the results can be included upon request with the system at the time of purchase to aid in coilover tuning.\u003c\/p\u003e\n\n\u003cp\u003eWith over 864 possible settings the Kontrol Plus 2-Way Coilovers provide the ultimate in suspension performance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:External ReservoirsDamping Adjustments60-150% Harder Damping SettingAdded Oil CapacityIndividually Dyno Tested55mm Monotube ShocksAerospace Quality Aluminum ComponentsAdvanced Pillowball MountsAdjustable Lower Mount Allowing Maximum Suspension TravelCamber AdjustmentMonotube High Pressure Design Reduces Oil LeakageAdjustable Spring Perch for Height AdjustmentDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 12\u003cbr\u003e\nRear Spring Rates(kg\/mm): 6.3\u003c\/p\u003e\n\n\u003cp\u003eFitments:Acura Integra DC2 1994-2001Honda Civic EG 1992-1995Note: Ksport Kontrol Plus 2-Way kits are built to order - please allow 2-3 weeks for production and delivery. Photos shown are for reference only. Actual application may vary.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649280008484,"sku":"Model #CHD020-P2","price":2200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil3_2d88ad66-5507-43e1-83a1-799d650ebc91.jpg?v=1688441998"},{"product_id":"ksport-gravel-rally-spec-gr-coilover-kit-honda-acura-1992-2001-model-chd020-gr","title":"Ksport Gravel Rally Spec GR Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eThe Ksport Gravel Rally Coilovers are built to handle the abuse of the gravel rally racing circuit. The system features a lengthened shock stroke combined with longer springs (ranging from 250mm to 270mm) which allow it to easily absorb uneven road conditions. In addition, the Gravel Rally Coilover Kit also features heavy duty top plates and lower mounts for added strength and durability. Ride height can be adjusted +\/- 30mm from OE ride height.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:36-Way Adjustable DampingSpecially Designed Extended Length Springs for Rally RacingExtended Cylinder Length and Piston StrokeInverted Design for McPherson Type SuspensionLarge 55mm Shock BodiesHeavy Duty Steel Top MountsHeavy Duty Steel Lower MountsHardened Rubber Pillowball for Reduced NoiseAerospace Quality Aluminum ComponentsMonotube High Pressure Design Reduces Oil LeakageAdjustable Spring Perch for Height AdjustmentPillowball Top Mount for Increased Steering FeelAdjustable Lower Mount Allowing Maximum Suspension TravelDust Boot to Protect Damper SealEasy InstallationFront Spring Rates(kg\/mm): 7\u003cbr\u003e\nRear Spring Rates(kg\/mm): 4.5\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic 1992-1995Acura Integra DC2 1994-2001Note: Ksport Gravel Rally kits are built to order - please allow 2-3 weeks for production and delivery.Due to the harsh nature of Gravel Rally racing, we do not offer a warranty on these kits.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649282072868,"sku":"Model #CHD020-GR","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil19.jpg?v=1688441999"},{"product_id":"ksport-circuit-pro-3-way-coilover-kit-honda-acura-1992-2001-model-chd020-c3","title":"Ksport Circuit Pro 3 Way Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eThe Ksport Circuit Pro 3-Way Coilover kit is our top of the line system for enthusiasts and professionals alike who require maximum performance and durability. With years of engineering, testing and development, the Circuit Pro 3-Way system has been perfected in virtually every facet of motorsports, ranging from drifting to time attack or circuit driving. The uncompromising range of adjustability on the system makes it possible to win at the track while also being suitable for daily driving.\u003c\/p\u003e\n\n\u003cp\u003eThe key component to the Circuit Pro system is its utilization of remote reservoirs which provide separate adjustments for rebound and compression, as well as nitrogen gas pressure. With over 11,664 possible settings provided by each Circuit Pro coilover system, it is possible to leave no stone unturned in the quest for ultimate performance from your vehicle's suspension system. In addition to adjustability, the added oil capacity provided by the remote reservoirs increase the system's ability to dissipate heat, which leads to improved performance over long periods, such as endurance or tarmac racing, in addition to consistent performance throughout long heat cycles. These features, paired with 55mm Monotube shocks, ensure maximum durability and consistent performance.\u003c\/p\u003e\n\n\u003cp\u003eA variety of external hardware components are available on the Circuit Pro 3-Way Coilovers to completely customize the system to your vehicle. When fitting this kit to your vehicle, upper mounts are available in rubber form, pillowball or Ksport's award winning advanced pillowball mounts that offer camber and caster adjustment. To further ensure complete customization and performance, each system has been dyno tested individually and the results can be included upon request with the system at the time of purchase to aid in coilover tuning.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:External Reservoirs for Independent Rebound and Compression AdjustmentBuilt for RacingUpgraded Shock Bump StopsAdded Oil CapacityIndividually Dyno Tested55mm Monotube Shocks36-Way Adjustable DampingAerospace Quality Aluminum ComponentsAll Metal Pillowball for Added Strength and ResponsivenessAdjustable Lower Mount Allowing Maximum Suspension TravelCamber AdjustmentMonotube High Pressure Design Reduces Oil LeakageAdjustable Spring Perch for Height AdjustmentDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 20\u003cbr\u003e\nRear Spring Rates(kg\/mm): 18\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic EG 1992-1995Acura Integra DC2 1994-2001Note: Ksport Circuit Pro 3-Way kits are built to order - please allow 2-3 weeks for production and delivery. Photos shown are for reference only. Actual application may vary.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649283678500,"sku":"Model #CHD020-C3","price":3050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil2_65138fd5-2dd6-435b-8ea2-e8351b34bb5d.jpg?v=1688442003"},{"product_id":"ksport-asphalt-rally-spec-ar-coilover-kit-honda-acura-1992-2001-model-chd020-ar","title":"Ksport Asphalt Rally Spec AR Coilover Kit Honda|Acura 1992-2001","description":"\u003cp\u003eThe Ksport Asphalt Rally Coilovers are designed specifically for Asphalt Rally Racing and competition. This system features extended stroke, heavy-duty internals, and simultaneous compression and rebound adjustment. Large diameter pistons inside the shock allow for added oil capacity for increased cooling efficiency and carefully selected spring rates and shock damping settings for each application help to stabilize the vehicle and easily absorb bumps caused by uneven roads.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:36-Way Adjustable DampingInverted Steel Shock Absorber for Increased Response and Heat BuildupLarge 55mm Shock BodiesHeavy Duty Steel Lower MountsAll Metal Pillowball for Added Strength and ResponsivenessAerospace Quality Aluminum ComponentsMonotube High Pressure Design Reduces Oil LeakageCamber Adjustment on Many ModelsAdjustable Spring Perch for Height AdjustmentPillowball Top Mount for Increased Steering FeelAdjustable Lower Mount Allowing Maximum Suspension TravelDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 16\u003cbr\u003e\nRear Spring Rates(kg\/mm): 8.7\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic 1992-1995Acura Integra DC2 1994-2001Note: Ksport Asphalt Rally kits are built to order - please allow 2-3 weeks for production and delivery.\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":45649284235556,"sku":"Model #CHD020-AR","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ksportcoil1_b1ffa307-d524-4ab7-90c7-f72b095fd518.jpg?v=1688442005"},{"product_id":"kw-coilover-kit-v3-honda-civic-coupe-hatchback-sedan-civic-del-sol-with-rear-lower-fork-mounts-1992-1997-model-35250002","title":"KW Coilover Kit V3 Honda Civic Coupe Hatchback Sedan | Civic Del Sol with Rear Lower Fork Mounts 1992-1997","description":"\u003cp\u003eState-of-the-art technology from motor sports for more performance on the road. The separate and independently adjustable rebound- and compression Dampening allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound Dampening adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.\u003c\/p\u003e\n\n\u003cp\u003eGeneral Features:\u003cbr\u003e\nDampening technology with individually adjustable rebound- and compression technologyinox-line* stainless steel technologyIndividually height adjustableAdjustment parameters approved by the German Technical Control Board (TÜV)High-quality components for long durabilityInfinitely variable rebound Dampening adjustment14-way adjustable compression DampeningUnique, individually working Dampening force adjustmentComprehensive documentation for easy useSpecific Features:with adjustable compression and rebound Dampening TÜV approved Front lowering adjustment ranges (min.-max.): 45-75 mm (1.7-2.9 inches) Rear lowering adjustment ranges (min-max): 45-75 mm (1.7-2.9 inches) Front Spring Rate: Progressive Rear Spring Rate: ProgressiveFitment:Honda Civic; Coupe, Hatchback, Sedanwith rear lower fork mounts 1992-1995Honda Civic Del Sol with rear lower fork mountsApplication Guides: Manual 1 Manual 2TUV Certification: Part 1Note:Height adjustable on the front and rear axles (threaded strut housings)\u003c\/p\u003e \n\n\n \u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45649284268324,"sku":"Model #35250002","price":1959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/KW_352200DE_a635342e-885b-467d-8f4c-72b702b59006.jpg?v=1688442014"},{"product_id":"kw-coilover-kit-v2-honda-civic-coupe-hatchback-sedan-civic-del-sol-with-rear-lower-fork-mounts-1992-1997-model-15250002","title":"KW Coilover Kit V2 Honda Civic Coupe Hatchback Sedan | Civic Del Sol with Rear Lower Fork Mounts 1992-1997","description":"\u003cp\u003eKW Variant 2 \"inox-line\"\u003c\/p\u003e\n\n\u003cp\u003eFor more stability and driving comfort. With adjustable rebound damping.\u003cbr\u003e\nDrivers who want more than just an outstanding look and lowering within the tested adjustment range, will find the perfect suspension solution with our KW coilovers Variant 2 \"inox-line\". Not only stainless steel struts, corrosion-resistant components great durability, you have the possiblity to adjust the dampers to your own requirements in rebound (16 clicks) are good reasons to buy KW coilovers Variant 2 \"inox-line\".\u003c\/p\u003e\n\n\u003cp\u003eMore comfort or more sportiness - you decide!\u003cbr\u003e\nAs with all KW coilovers our engineers develop vehicle specific damper settings which undergo comprehensive test cycles in the Nurburgring Nordschleife and on our KW 7-post driving dynamic centre. With a KW coilover kit the driving experience is more dynamic and direct. Because of the rebound adjustablility with our KW Variant 2 coilovers you can have more influence in handling and comfort of the car. With 16 precise click you can adjust the KW dampers (firmer or more comfortable) without affecting the bottom valve of the compression damping.\u003c\/p\u003e\n\n\u003cp\u003eDepending on vehicle type, the rebound valves of the KW twin-tube dampers have to be adjusted at the upper end of the piston rod with an integrated adjustment wheel or the twist-adjuster which is part of the delivery content. By increasing the rebound force via the adjustment wheel, the body movements are reduced. Your car will stay in line and you will have more stability at increased corner speed. If you change for example the wheel \/ tire combination (approved by the car manufacturer) to larger wheels, then with a KW coilover Variant 2 you will be able to adjust the car's handling and the new wheels perfectly to each other.\u003c\/p\u003e\n\n\u003cp\u003eKW Quality - Your satisfaction is our motivation\u003cbr\u003e\nAt our headquarters in Fichtenberg each KW coilover Variant 2 \"inox-line\" kit is subject to extensive stress tests during production to meet the high standards of our KW quality management. Every single damper and suspension kit is tested thoroughly. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.\u003c\/p\u003e\n\n\u003cp\u003eKW coilover struts are 100% rust-free and have an unlimited life time under all weather conditions. All parts are designed for long term use. After a salt spray test the KW coilover struts were free of oxidation. Even after years the height adjustment will not be affected.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Rebound adjustable damper technology with 16 precise clicksStainless steel technology \"inox-line\"Individual, continuous loweringTested adjustment rangeReady to install complete solutionHigh quality components for a long lifeComplete documentation for an easy installationSetup - Adjustable rebound damping with 16 clicks.\u003cbr\u003e\nYou have 16 clicks of adjustments with a KW coilover Variant 2 \"inox-line\". The rebound adjustment changes the driving dynamics if the change the complete wheel set or install a set of winter tires. You can adjust the damping characteristics of the weather-resistant KW coilover 2 \"inox-line\" to be firmer or more comfortable, according to your own needs. The suspension is suitable for all competitive drivers who want more than just continous lowering for their driving pleasure.\u003c\/p\u003e\n\n\u003cp\u003eFitment:Honda Civic Coupe Hatchback Sedan with Rear Lower Fork Mounts 1992-1995Honda Civic Del Sol with Rear Lower Fork Mounts 1993-1997View Install Instructions.Here!\u003c\/p\u003e\n\n\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45649284301092,"sku":"Model #15250002","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/KW_1521000B_09b80d8c-8bf6-49e2-9cdc-d9ac9fa665c8.jpg?v=1688442021"},{"product_id":"kw-coilover-kit-v1-honda-civic-with-rear-lower-fork-mounts-1992-1997-model-10250002","title":"KW Coilover Kit V1 Honda Civic with Rear Lower Fork Mounts 1992-1997","description":"\u003cp\u003eKW Variant 1 inox-line\u003c\/p\u003e\n\n\u003cp\u003eSporty handling combined with outstanding looks. With factory pre-configured damping.\u003cbr\u003e\nThe KW coilover kit Variant 1 \"inox-line\" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.\u003c\/p\u003e\n\n\u003cp\u003eContinuous lowering\u003cbr\u003e\nWith the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.\u003c\/p\u003e\n\n\u003cp\u003eThe benchmark for tuning fans\u003cbr\u003e\nKW coilover Variant 1 \"inox-line\" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 \"inox-line\", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.\u003c\/p\u003e\n\n\u003cp\u003eTrust In Our Experience\u003cbr\u003e\nWe are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers \"Made in Germany\". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Optimally pre-adjustedSporty and comfortable dampening technologyStainless steel technology \"inox-line\"Individually height adjustableTested adjustment rangeReady to install complete solutionHigh quality components for a long durabilityComplete documentation for easy handlingSetup - Factory pre-configured damping setup\u003cbr\u003e\nThe KW coilover Variant 1 \"inox-line\" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.\u003c\/p\u003e\n\n\u003cp\u003eEven with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are \"Show \u0026amp; Shine\" events are interested in the KW Variant 1 \"inox-line\".\u003c\/p\u003e\n\n\u003cp\u003eFitment:Honda Civic 1991-1996Application Guides: Manual 1TUV Certification: Part 1\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45649284333860,"sku":"Model #10250002","price":1239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/KW_1021000B_7b635806-acab-451c-afa7-0d3c7394cfcf.jpg?v=1688442027"},{"product_id":"isc-suspension-v2-basic-coilover-kit-track-race-w-triple-s-upgraded-coilover-springs-honda-civic-gen5-1992-1995-model-isc-h013b-t-ts","title":"ISC Suspension V2 Basic Coilover Kit Track\/Race w\/Triple S Upgraded Coilover Springs Honda Civic Gen5 1992-1995","description":"\u003cp\u003eFront Spring Length: 180mm, Front Spring Rate: 12k, Rear Spring Length: 180mm, Rear Spring Rate: 8k\u003c\/p\u003e\n\n\u003cp\u003eThe ISC Basic Coilover system is all about adjust-ability combined with affordability. The ISC Basic has all the same great features of our ISC N1 coilover, including 32 way adjustable damping, full height adjust-ability, mono-tube dampers, premium hardware and more, with the exception of adjustable top camber plates.\u003c\/p\u003e\n\n\u003cp\u003eThe ISC Basic coilover will come with a gold anodized aluminum top plate featuring a rubber top mount designed for comfort. ISC coilovers are also 100% rebuildable!\u003c\/p\u003e\n\n\u003cp\u003eFitment:Honda Civic Gen5 1992-1995Warranty:All ISC Basic Coilovers are backed by our industry leading limited lifetime warranty! For more info on this please refer to ISC Suspension Warranty\u003c\/p\u003e\u003cbr\u003e\n \n\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cp\u003eProposition 65\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n WARNING: Cancer and Reproductive Harm\u003cbr\u003e\n \u003cbr\u003e\n https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ISC Suspension","offers":[{"title":"Default Title","offer_id":45649289380132,"sku":"Model #ISC-H013B-T-TS","price":1185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/ISCSuspension_H013B.jpg?v=1688442079"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/collections\/JDM-Civic-EG6-SiR-S-Sunlight-yellow-Spoon-Sports_12_69d10021-50af-4ca3-b2e4-395b101e0572.jpg?v=1729468806","url":"https:\/\/www.built2race.com\/collections\/suspension-honda-92-95-civic.oembed","provider":"Built2Race","version":"1.0","type":"link"}