{"title":"Suspension | Honda | 23+ Civic Type R","description":"","products":[{"product_id":"tein-flex-a-coilover-kit-honda-civic-type-r-2017-2021","title":"TEIN Flex A Coilover Kit Honda Civic Type R 2017-2021","description":"\u003cp\u003eThe TEIN FLEX A products are made with a Hydraulic Bump Stopper (H.B.S) this provides more comfort and hight durability at the maximum passenger or cargo load. When regular shock absorbers fully stroke, their bump rubbers are compressed. The energy that is generated by that escapes as a repulsive force, which can disturb the vehicle's behavior. Furthermore, repeated full strokes can damage the damper. In the same situation the FLEX A, featuring H.B.S., internally convert the impact of the stroke to thermal energy (heat) and absorb it, strongly reducing the impact that disturbs the vehicle's behavior. With less damage to the dampers, H.B.S. also contributes to their durability. In shock absorbers with inactive or no H.B.S., the operative valve (green) floats, and oil flows freely through the base valve ports. Resistance to the flow from the shim stack then causes damping force. Near full compression, when the piston rod strokes beyond a predetermined point, the operative valve is pushed down and activates H.B.S.: the base valve ports are narrowed, blocking the oil flow. This results in high damping force. A relief valve serves to suppress sudden damping force increase when the pressure in the cylinder exceeds its regular level. The setup of the H.B.S. mechanism is optimized per vehicle model, with the right activation point and damping force.\u003c\/p\u003e\n\n\u003cp\u003eFront Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: R\/URecommended Ride Height (mm): 30Recommended Ride Height (inch): -1.2Ride Height Adjustable Range: Max Low (mm): -60Max Low (inch): -2.4Max High (mm): -6Max High (inch): -0.2Recommended Low (mm): -40Recommended Low (inch): -1.6Recommended High (mm): -20Recommended High (inch): -0.8SpringRate (kgf\/mm): 8Rate (lbs\/in): 138SP PART#SA080-01150Free Length (mm): 150Rear Specifications:Damping Force Adjustment: YFull-Length Ride-Height Adjustable: YUpper Mount: OEMRecommended Ride Height (mm): -30Recommended Ride Height (inch): -1.2Ride Height Adjustable Range: Max Low (mm): -60Max Low (inch): -2.4Max High  (mm): -11Max High  (inch): -0.4Recommended Low (mm): -20Recommended Low (inch): -1.6Recommended High (mm): -20Recommended High (inch): -0.8Spring: Rate (kgf\/mm): 8.0Rate (lbs\/in): 138SP PART#S6HK9-01080Free Length (mm): 197Fitment:Honda Civic Type R 2017-2021Notes:Rr: Oe Dust Boot Needs To Be Modified.TEIN Flex A Features:Twin-Tube SystemConsidering the use of larger tires\/wheels and the lowered ride height, FLEX A uses a twin-tube system, in pursuit of ride comfort on streets. In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly.As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke. Also, low gas pressure keeps friction low. Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed. Full-Length System for Ride Height Adjustment w\/Minimal Change in RideFull-length ride height adjustment system, used for FLEX A, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and\/or spring pre-load. This has the advantage that the change in ride quality is kept minimal when the height is adjusted. This system not only makes it possible to maintain a good balance between the low-down appearance and ride comfort but also provides more setting choices for sport driving as well. Damping Force AdjustableFLEX A has ever-popular 16-level damping force adjustment (comp.\/rebound together) feature with the use of needle valve. By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit the driver's needs\/preferences. Use of well-reputed \"ADVANCE Needle\" at the needle valve for oil flow control widens damping force adjustable range to about 200% of the existing lineups.Whether it's for the handling characteristics of sport driving or for the ride quality according to numbers of passengers, finding the most desirable setting is easier than ever. Compatible with EDFC SeriesWith EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease. Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately. Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE \/ EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of \"ADVANCE Needle\". With EDFC ACTIVE \/ EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and\/or vehicle speed, to offer very smooth and slick ride like never before. Some models are NOT compatible with EDFC series.Upper Mount DesignFLEX A kit includes upper mounts exclusively designed for each vehicle model; either reinforced rubber mounts or pillow ball mounts. Pillow ball upper mounts for front strut suspensions have camber adjustment feature. Some vehicle models use OE mounts.) Durable One-Of-A-Kind ZT Coating Upper mounts and lower brackets are coated with rich TEIN green powder paint. This powder paint has high coating film strength, is highly durable yet is low-pollution due to non-use of harmful solvent. After the shot blasting pre-treatment, the patented \"2-layer\/1-bake\" treatment using anti-rust powder paint is applied for superior durability and high corrosion resistance. (Patent No. 4347712) On shell case, TEIN's self-developed one-of-a-kind \"ZT Coating\" is applied, for tougher protection against chipping, often caused by bounced pebbles, and rust. Rigid Bracket \u0026amp; Shell CaseFor strut suspensions, the sufficiently-thick ribbed plate is used for knuckle bracket to maintain high rigidity. Flange shape edge of the bracket provides larger contact area with the bracket lock, which is fastened with the conical washer inserted in between, to effectively prevent loosening of the bracket lock most commonly occurs on front strut suspensions. Brackets for brake hoses and ABS sensor harnesses etc are exclusively designed for each vehicle model for hassle-free installation. Shell case is made of high-strength steel STKM13C and solidly-constructed for firm handling and stable ride.Smooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting WrenchFLEX A has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs. Shell cases are treated with \"ZT Coating\", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period. FLEX A kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1\/2in) sq. hole for attaching spinner handle and\/or torque wrench for tightening at high torque. No-Sag SpringsThe included springs are made of high-tensile steel SAE9254 (tensile strength 200kgf\/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability. The surface is powder coated for superb protection against chipping \u0026amp; peeling, for high durability and for superior anti-corrosion performance. The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.High-Spec Damper OilSpecially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions. The oil has superior anti-foaming characteristics hence the bubble cavitation and\/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.\u003c\/p\u003e \n\n\n\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":44575340495140,"sku":"Model #VSHK8-D1AS4","price":1590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/FLEX-A-HONDA-RC1.jpg?v=1676171849"},{"product_id":"jrz-suspension-11-series-top-mount-honda-civic-fk8-2017-2021-004-fk8-01-11-00","title":"JRZ Suspension 11 Series Top Mount Honda Civic FK8 2017-2021","description":"\u003cp\u003eJRZ Suspension Engineering is proud to offer the JRZ 11 SERIES; Double Adjustable motorsport damper. The JRZ 11 series is the embodiment of our damping philosophy, which is to control the unsprung mass. Damping is available over a large range with fine tuning increments. Setup is easy to find and characteristics are fully customizable.\u003c\/p\u003e\n\n\u003cp\u003eMOTORSPORT DOUBLE ADJUSTABLE DAMPER:\u003cbr\u003e\nCompression and rebound independently adjustable. Rebound adjusted by orifices on the piston rod with check valve so there is no cross talk between the rebound adjustments and compression forces. Compression adjusted by blow off valve in the canister.\u003c\/p\u003e\n\n\u003cp\u003eCOMPRESSION:\u003cbr\u003e\nControl of the unsprung mass is achieved with our blow off valve. The compression adjustment sets the blow of force of the damper, allowing for harshness to be separated from control. Blow off damping settles the car on bumps, curbs, and maximizes grip while transitions and the balance are tuned.\u003c\/p\u003e\n\n\u003cp\u003eREBOUND:\u003cbr\u003e\nSprung mass is controlled with rebound damping, delivered smoothly by the 8060 motorsport piston. The 11 series rebound system and 8060 piston provides a linear damping characteristic with smooth pressure development independent of compression forces. This allows the damper to transition between rebound and compression efficiently, maximizing grip and reducing tire wear.\u003c\/p\u003e\n\n\u003cp\u003eCONTROL OF UNSPRUNG MASS:\u003cbr\u003e\nControl is achieved by using compression damping controlling the movement of the unsprung mass. By doing this the car will take kerb stones or road bumps extremely well and the car will not be unsettled with great control for the driver.\u003c\/p\u003e\n\n\u003cp\u003eMINIMIZED TIRE WEAR:\u003cbr\u003e\nUsing compression damping to control the unsprung mass will result in less tyre wear and better tyre temps. The unsprung mass will move according the tyre's natural frequency. Using the compression damping the contact patch of the tyre to the road will be maximized.\u003c\/p\u003e\n\n\u003cp\u003eLARGE ADJUSTMENT RANGE:\u003cbr\u003e\nDamping is available over a large adjustment range with fine tuning increments. Set up is easy to find and spring rates can be changed without having to revalve the damper\u003c\/p\u003e\n\n\u003cp\u003eADJUSTABLE GAS PRESSURE:\u003cbr\u003e\nThe combination of the 22 mm shaft and the use of nitrogen pressure results in a lifting force created by the damper. This lifting force is available through the whole stroke of the damper and works together with the spring, The lifting force is not a springrate, but gives the car platform.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:For professional on-track racing useDouble AdjustableRebound adjustment independent from compressionFully useable adjustment rangeFine yet noticeable change per click14 clicks compression24 clicks reboundHigh volume canisterAdjustable gas pressure22 mm shaftHighest flow rate to pistonLightest constructionThe classic JRZ design tailored for 4x4Part:Dampers Only AssemblyJRZ Top MountFitment:Honda Civic FK8 2017-2021\u003c\/p\u003e","brand":"JRZ Suspension","offers":[{"title":"Default Title","offer_id":49971031343396,"sku":"#004 FK8 01 11 00","price":7455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/JRZ-11series-1.webp?v=1728629702"},{"product_id":"jrz-suspension-12-series-top-mount-honda-civic-fk8-2017-2021-004-fk8-01-12-00","title":"JRZ Suspension 12 Series Top Mount Honda Civic FK8 2017-2021","description":"\u003cp\u003eJRZ Suspension Engineering is proud to offer the 12 Series; Triple Adjustable motorsport damper. The JRZ 12 series is an expansion of our damping philosophy, which is to control the unsprung mass. Added from the 11 series is the low speed compression adjustment, allowing pitch, roll, and balance to be tuned.\u003c\/p\u003e\n\n\u003cp\u003eMOTORSPORT TRIPLE ADJUSTABLE DAMPER:\u003cbr\u003e\nCompression and rebound independently adjustable. Rebound adjusted by orifices on the piston rod with check valve so there is no cross talk between the rebound adjustments and compression forces. Compression adjusted by blow off valve in the canister.\u003c\/p\u003e\n\n\u003cp\u003eCOMPRESSION:\u003cbr\u003e\nControl of the unsprung mass is achieved with our blow off valve. Steering balance and weight transfer rates are tuned with the low speed adjustment. The high speed compression adjustment sets the blow off velocity of the damper, allowing for harshness to be separated from control. Blow off damping settles the car on bumps, curbs, and maximizes grip. Low speed sets the speed at which the blow off valve opens allowing for fine tuning of balance and adjusting for surface conditions.\u003c\/p\u003e\n\n\u003cp\u003eREBOUND:\u003cbr\u003e\nSprung mass is controlled with rebound damping, delivered smoothly by the 8060 motorsport piston. The 12 series rebound system and 8060 piston provides a linear damping characteristic with smooth pressure development independent of compression forces. This allows the damper to transition between rebound and compression efficiently, maximizing grip and reducing tire wear.\u003c\/p\u003e\n\n\u003cp\u003eCONTROL OF UNSPRUNG MASS:\u003cbr\u003e\nControl is achieved by using compression damping controlling the movement of the unsprung mass. By doing this the car will take kerb stones or road bumps extremely well and the car will not be unsettled with great control for the driver.\u003c\/p\u003e\n\n\u003cp\u003eMINIMIZED TIRE WEAR:\u003cbr\u003e\nUsing compression damping to control the unsprung mass will result in less tyre wear and better tyre temps. The unsprung mass will move according the tyre's natural frequency. Using the compression damping the contact patch of the tyre to the road will be maximized.\u003c\/p\u003e\n\n\u003cp\u003eLARGE ADJUSTMENT RANGE:\u003cbr\u003e\nDamping is available over a large adjustment range with fine tuning increments. Set up is easy to find and spring rates can be changed without having to revalve the damper\u003c\/p\u003e\n\n\u003cp\u003eADJUSTABLE GAS PRESSURE:\u003cbr\u003e\nThe combination of the 22 mm shaft and the use of nitrogen pressure results in a lifting force created by the damper. This lifting force is available through the whole stroke of the damper and works together with the spring, The lifting force is not a springrate, but gives the car platform..\u003c\/p\u003e\n\n\u003cp\u003eFeatures:For professional on-track racing useTriple AdjustableRebound adjustment independent from compressionFully useable adjustment rangeFine yet noticeable change per click10 clicks low speed compression19 clicks high speed compression24 clicks reboundHigh volume canisterAdjustable gas pressure22 mm shaftHighest flow rate to pistonLightest constructionIdeal for lighter applications and aluminium body dampersThe classic JRZ designPart:Dampers Only AssemblyJRZ Top MountFitment:Honda Civic FK8 2017-2021\u003c\/p\u003e","brand":"JRZ Suspension","offers":[{"title":"Default Title","offer_id":49971031408932,"sku":"#004 FK8 01 12 00","price":9605.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/JRZ-12series-1.webp?v=1728629710"},{"product_id":"jrz-suspension-rs-pro-top-mount-honda-civic-fk8-2017-2021-004-fk8-01-35-00","title":"JRZ Suspension RS PRO Top Mount Honda Civic FK8 2017-2021","description":"\u003cp\u003eLatest developments from racing integrated in the JRZ RS PRO system. The use of large shaft creates an optimum fluid displacement through adjustable blow off valve in compression, to control unsprung mass. A Special designed piston is used to filter out the large, high velocity movements seen with suspensions on street applications.\u003c\/p\u003e\n\n\u003cp\u003eLARGE AND EASY ADJUSTMENT RANGE:\u003cbr\u003e\nNo need to compromise on performance\/comfort due to the large adjustment range. The suspension allows adjustment between smooth street use and aggressive track use. Below you can see the force \/ displacement graph of a typical JRZ RS PRO.\u003c\/p\u003e\n\n\u003cp\u003eWith every click (counter clockwise) you increase the damping forces. With every click you will notice direct influence on the handling of the car. Therefor adjusting the suspension is very quick and easy.\u003c\/p\u003e\n\n\u003cp\u003eSTRUT COATING:\u003cbr\u003e\nCollaborating with a top tier coating firm, JRZ offers cutting edge technology to allow extremely high corrosion resistance in steel strut applications.\u003c\/p\u003e\n\n\u003cp\u003eGUIDE CONSTRUCTION:\u003cbr\u003e\nThe new shaft bearing construction allows the damper to live a long life in between service without performance fade. Specially designed for longevity and rebuildability.\u003c\/p\u003e\n\n\u003cp\u003eBUMPS STOPS AND DUST BOOTS:\u003cbr\u003e\nTo further increase service life and safe operating ranges specially designed bump stops and dust boots are included.\u003c\/p\u003e\n\n\u003cp\u003eVALVING DESIGN:\u003cbr\u003e\nThe unique compression blow off system damps the unsprung mass resulting in superb handling characteristics without sacrificing comfort.\u003c\/p\u003e\n\n\u003cp\u003eCNC MACHINING:\u003cbr\u003e\nThe JRZ RS Line dampers uses CNC machined internals that allow precise damping characteristics to be achieved. The JRZ RS is built on the same line as the motorsport line.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:For Street and Track useDouble Adjustable - External ReservoirAdjustable compression damping 14 clicksAdjustable rebound damping 21 clicksEvery click noticeable changeRide height adjustableGas pressure adjustable (nitrogen)Uses spherical bearingsValved for more chassis control and performanceFits aftermarket topmountsPart:Dampers Only AssemblyJRZ Top MountFitment:Honda Civic FK8 2017-2021\u003c\/p\u003e","brand":"JRZ Suspension","offers":[{"title":"Default Title","offer_id":49971031441700,"sku":"#004 FK8 01 35 00","price":5470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/JRZ-RSP-1.webp?v=1728629716"},{"product_id":"jrz-suspension-rs-pro-3-top-mount-honda-civic-fk8-2017-2021-004-fk8-01-45-00","title":"JRZ Suspension RS PRO 3 Top Mount Honda Civic FK8 2017-2021","description":"\u003cp\u003eThe original 3-way motorsport damper is integrated in the JRZ RS PRO 3 system. The use of large shaft creates an optimum fluid displacement through adjustable blow off valve in compression, to control unsprung mass. A Special designed piston is used to filter out the large, high velocity movements seen with suspensions on street applications.\u003c\/p\u003e\n\n\u003cp\u003eCOMPRESSION:\u003cbr\u003e\nControl of the unsprung mass is achieved with our blow off valve. Steering balance and weight transfer rates are tuned with the low speed adjustment. The high speed compression adjustment sets the blow off velocity of the damper, allowing for harshness to be separated from control. Blow off damping settles the car on bumps, curbs, and maximizes grip. Low speed sets the speed at which the blow off valve opens allowing for fine tuning of balance and adjusting for surface conditions.\u003c\/p\u003e \n\n\u003cp\u003eLARGE AND EASY ADJUSTMENT RANGE:\u003cbr\u003e\nNo need to compromise on performance\/comfort due to the large adjustment range. The suspension allows adjustment between smooth street use and aggressive track use. Below you can see the force \/ displacement graph of a typical JRZ RS PRO.\u003c\/p\u003e\n\n\u003cp\u003eWith every click (counter clockwise) you increase the damping forces. With every click you will notice direct influence on the handling of the car. Therefor adjusting the suspension is very quick and easy.\u003c\/p\u003e\n\n\u003cp\u003eSTRUT COATING:\u003cbr\u003e\nCollaborating with a top tier coating firm, JRZ offers cutting edge technology to allow extremely high corrosion resistance in steel strut applications.\u003c\/p\u003e\n\n\u003cp\u003eGUIDE CONSTRUCTION:\u003cbr\u003e\nThe new shaft bearing construction allows the damper to live a long life in between service without performance fade. Specially designed for longevity and rebuildability.\u003c\/p\u003e\n\n\u003cp\u003eBUMPS STOPS AND DUST BOOTS:\u003cbr\u003e\nTo further increase service life and safe operating ranges specially designed bump stops and dust boots are included.\u003c\/p\u003e\n\n\u003cp\u003eVALVING DESIGN:\u003cbr\u003e\nThe unique compression blow off system damps the unsprung mass resulting in superb handling characteristics without sacrificing comfort.\u003c\/p\u003e\n\n\u003cp\u003eCNC MACHINING:\u003cbr\u003e\nThe JRZ RS Line dampers uses CNC machined internals that allow precise damping characteristics to be achieved. The JRZ RS is built on the same line as the motorsport line.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:For Street and Track useTriple Adjustable - External Reservoir\u003cbr\u003e\n1. Rebound\u003cbr\u003e\n2. Compression High speed\u003cbr\u003e\n3. Compression Low speedAdjustable high speed compression damping 14 clicksAdjustable low speed compression damping 8 clicksAdjustable rebound damping 21 clicksEvery click noticeable changeRide height adjustableGas pressure adjustable (nitrogen)Uses spherical bearingsValved for more chassis control and performanceFits aftermarket topmountsPart:Dampers Only AssemblyJRZ Top MountFitment:Honda Civic FK8 2017-2021\u003c\/p\u003e","brand":"JRZ Suspension","offers":[{"title":"Default Title","offer_id":49971032359204,"sku":"#004 FK8 01 45 00","price":7035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/JRZ-RSP3-1.webp?v=1728629729"},{"product_id":"revel-touring-sport-damper-honda-civic-type-r-2023-1tr3cdhn016","title":"Revel Touring Sport Damper Honda Civic Type-R 2023","description":"\u003cp\u003eWe are excited to announce a new Revel Touring Sport Coilover Application for the ALL-NEW 2023 Honda Civic Type R FL5! The Touring Sports Damper offers you a sporty yet comfortable ride that will enhance your driving experience to new heights. The fully threaded monotube damper gives you ride height adjustability, and 32 levels of dampening adjustment allows for fine tuning of the ride characteristics. Front pillowball upper mounts with camber adjustment and radial bearings are included, improving handling and car feedback to the driver. Coilover covers are provided to add another layer of protection from dirt, debris, and weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe 32 way adjustable Revel Touring Sports Damper is the ideal solution for the most comfortable ride in a coilover kit while achieving an extremely low ride height and utilizing the perfect balance of dampening forces and spring rates to deliver smooth performance when it is needed.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Aluminum Upper Mount (W\/ Rubber Bushing) IncludedPillowball Upper Mount IncludedNo Upper Mount IncludedRadial Bearing IncludedSeparate Spring And DamperFront Spring Rate: 8KRear Spring Rate: 5KCoilover Cover: YesRadial Bearing: YesFront: P-RRear: N-SFitment:Honda Civic Type-R 2023\u003c\/p\u003e","brand":"Revel","offers":[{"title":"Default Title","offer_id":49971032424740,"sku":"#1TR3CDHN016","price":1445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/1TR3CDHN016.webp?v=1728629734"},{"product_id":"kw-suspension-v3-coilover-kit-bundle-honda-civic-type-r-fk8-type-r-fl5-2017-2024-35250036","title":"KW Suspension V3 Coilover Kit Bundle Honda Civic Type-R (FK8) | Type-R (FL5) 2017-2024","description":"\u003cp\u003eKW V3: Race technology for the road, with adjustable compression and rebound dampening. State of the art motorsport technology enables better performance on the streets. The independently adjustable compression and rebound dampening allows for custom driving setups. The exclusive KW patented system has dual level valves that allow for adjustment of the rebound dampening for your road comfort and the compression dampening that controls the driving dynamics.\u003c\/p\u003e\n\n\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant improvement on the road. Thanks to the high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel more confident but driving in everyday life is improved. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity.\u003c\/p\u003e\n\n\u003cp\u003eTrue performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate ? a scenario which results in reduced grip and the associated loss of performance. The KW V3 INOX-LINE coilover kit is the ideal tool for performanceforiented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The V3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive Adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Composite spring perch made from wear-resistant, frictiontoptimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.Each damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.KW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.Road legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.TVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blowtoff feature open to maximize flow.TVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.Install Instructions:For Instructions CLICK HEREFor Instructions CLICK HEREFitment:Honda Civic Type R (FK8) 2017-2021Honda Civic Type R (FL5) 2023-2024\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":49971032457508,"sku":"#35250036","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/35250036_001.webp?v=1728629744"},{"product_id":"kw-suspension-clubsport-kit-2-way-w-top-mounts-honda-civic-type-r-fk8-2017-2021-35250835","title":"KW Suspension Clubsport Kit 2 Way w\/ Top Mounts Honda Civic Type-R FK8 2017-2021","description":"\u003cp\u003eKW V3 Clubsport: 2 Way damping adjustable Coilovers for Race track and road. These set ups were specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, suspension geometry can be adjusted to the requirements of the tires and the intended use.\u003c\/p\u003e\n\n\u003cp\u003eThese adjustable top mounts coupled with the independently adjustable rebound and compression dampening technology individual set up adjustments according to vehicle load, tire characteristics and different track conditions. KW V3 Clubsports meets all needs for the road and the race track guaranteeing excellent handling, best performance, great agility and fantastic lap times.\u003c\/p\u003e\n\n\u003cp\u003eThe rebound adjuster knob provides 16 precise clicks to personally dial in your desired vehicle setup. Thus allowing you the possibility to influence wheel\/tire loads or take into concern chassis characteristics. Independent from rebound adjustment is the compression dampening, 12 precise adjustment clicks are provided to adjust the low-speed dampening. Most notably used to dial in wheel\/tire setup. These adjustment features allow the user to dial in vehicle weight, wheel\/tire combinations, various road surfaces and environmental conditions.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Independently adjustable rebound and compression damping technologyStainless steel technology \"inox-line\"Seamlessly adjusable loweringTUV-tested adjustment rangeHigh-quality components for a long-term durabilityAdjustable rebound damping with 16 precise clicksAdjustable compression damping with 12 precise clicksUnique independent damping force adjustmentOptional spherical bearing aluminum top mountsInstall Instructions:For Instructions CLICK HEREFitment:Honda Civic Type R 2017-2021Honda Civic Type R Limited Edition 2021\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":49971032490276,"sku":"#35250835","price":3639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/KW_35250835_Generic_001_640.webp?v=1728629753"},{"product_id":"kw-suspension-v3-clubsport-kit-honda-civic-type-r-fl5-2023-2024-35250840","title":"KW Suspension V3 Clubsport Kit Honda Civic Type-R FL5 2023-2024","description":"\u003cp\u003eKW V3 Clubsport coilovers\u003c\/p\u003e\n\n\u003cp\u003eThe KW Clubsport coilovers utilize the uncompromising transfer of technology from the world of motorsports to track day\/street driving.\u003cbr\u003e\nThe KW Clubsport coilovers combine KW's high-end racing technology with maintenance-free KW OEM components and part certificate.\u003c\/p\u003e\n\n\u003cp\u003eThis will provide you the ideal product to take full potential of your sports car during track days, sports car driving clinics, enthusiast drives on Grand Prix circuits and on tracks such as the Nurburgring Nordschleife.\u003c\/p\u003e\n\n\u003cp\u003eDesigned on the toughest race track in the world: The Nurburgring Nordschleife\u003cbr\u003e\nThe KW Clubsport coilovers provide the ability to adjust for different track surfaces, sharp turns and abrupt elevation changes. The KW Clubsport is in its home environment on the famous twists and turns of the 20.8 km long Nurburgring Nordschleife circuit.\u003c\/p\u003e\n\n\u003cp\u003eAs a supporting suspension manufacturer to numerous different racing series. KW had claimed 6 ADAC Zurich 24-hour victories within 10 years at the famous Nurburgring circuit and the ADAC GT Masters 2011 Championship. More then 70 race teams are equipped with KW coilover systems in the VLN Endurance Championship series. These race teams rely on KW's racing expertise and experience for their vehicle setup. This information is mirrored in the development of the KW Clubsport coilover systems.\u003c\/p\u003e\n\n\u003cp\u003eThe KW V3 Clubsports and KW V4 Clubsport provides the user numerous adjustment settings. This allows to user to dial the suspension setup to his\/hers driving style and to adjust or match the tire\/wheel setup of the vehicle.\u003c\/p\u003e\n\n\u003cp\u003eRebound and compression dampening is independently adjustable by hand via the integrated click adjusters. Adjustable top mounts are optional on certain applications.\u003c\/p\u003e\n\n\u003cp\u003eKW V3 Clubsport Racing Technology\u003cbr\u003e\nThe rebound adjuster knob provides 16 precise clicks to personally dial in your desired vehicle setup. Thus allowing you the possibility to influence wheel\/tire loads or take into concern chassis characteristics. Independent from rebound adjustment is the compression dampening, 12 precise adjustment clicks are provided to adjust the low-speed dampening. Most notably used to dial in wheel\/tire setup.\u003c\/p\u003e\n\n\u003cp\u003eThese adjustment features allow the user to dial in vehicle weight, wheel\/tire combinations, various road surfaces and environmental conditions.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:independently adjustable rebound and compression damping technologystainless steel technology \"inox-line\"continuous loweringtested adjustment rangehigh-quality components for a long-term durabilityadjustable rebound damping with 16 precise clicksadjustable compression damping with 12 precise clicksunique, independent damping force adjustmentoptional spherical bearing aluminum top mountsInstall Instructions:CLICK HERE!CLICK HERE!CLICK HERE!Fitment:Honda Civic Type-R (FL5) 2023-2024\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":49971032523044,"sku":"#35250840","price":5999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/35250840.webp?v=1728629764"},{"product_id":"f2-function-and-form-type-3-coilovers-kit-honda-civic-type-r-fk8-2017-2021-38100217k","title":"F2 Function and Form Type 3 Coilovers Kit Honda Civic Type R FK8 2017-2021","description":"\u003cp\u003eWhat are you looking for, performance coilovers or racing coilovers? The good news is we have both. Lower your ride and remove unwanted body roll. Our performance coilovers are full-bodied and made of a special blend of steel for extra strength. Variable damping and proper spring rates will give you the perfect steering feel and confidence in the turns, with a threaded body and lower mounts for ride height adjustments so you can get that lowered look. F2 Suspension stands by our performance coilovers with a limited warranty that covers factory defects. Get it low and get it right with Function and Form.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Track focused full-bodied coiloversVariable damping matched with proper spring ratesHigh-strength JIS G3445 carbon steel shock bodyCustomizable spring ratesQuick install preload readyFitment:Honda Civic Type R FK8 2017-2021Honda Civic Type R FK8 2017-2021\u003c\/p\u003e","brand":"Function and Form","offers":[{"title":"Default Title","offer_id":49971032555812,"sku":"#38100217K","price":1590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/38100217K_01.webp?v=1728629766"},{"product_id":"bc-racing-br-type-coilovers-honda-civic-type-r-2017-2021-a-130-br","title":"BC Racing BR Type Coilovers Honda Civic Type-R 2017-2021","description":"\u003cp\u003eBC Racing BR Type Coilover is perfect for street driving and occasional road course duty. With easily accessible adjustment knobs for fine tuning your compression\/rebound and separately adjustable ride height, having a performance coilover system couldn't be any easier. You choose how low or high you want your vehicle, no preset ride height here, and our patented concave lower locking ring keeps it locked in. All of our systems come with pillowball mounts to provide the most feedback possible from your suspension and to sharpen your steering response. BC's available front and rear camber plates also allow you to get the perfect alignment setup without compromise. All this while providing a strong, attractive looking coilover system.\u003c\/p\u003e\n\n\u003cp\u003eOur BR model is perfect for street driving and occasional road course duty. With easily accessible adjustment knobs for fine tuning your compression\/rebound and separately adjustable ride height, having a performance coilover system couldn't be any easier. You choose how low or high you want your vehicle, no preset ride height here, and our patented concave lower locking ring keeps it locked in. All of our systems come with pillowball mounts to provide the most feedback possible from your suspension and to sharpen your steering response. BC's available front and rear camber plates also allow you to get the perfect alignment setup without compromise. All this while providing a strong, attractive looking coilover system.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Mono-tube shock design30 levels of damping force adjustment, adjust compression\/reboundPillowball mounts and adjustable camber plates included (where applicable)Adjustable rear camber plates availableSeparate full length height adjustableOne year warrantyRebuildableFitment:Honda Civic Type-R 2017-2021Note:Due to ride height adjustment ranges and spring rate vary so much from car to car and from model to model for most up to date information for your car please contact one of our friendly and knowledgeable sales staff.Default Spring Rates:Front Default Spring Rate: 7KG \/ Extreme Spring Rate - 8kgRear Default Spring Rate: 6KG\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":49971032785188,"sku":"#A-130-BR","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/bc-racing-default-br-series.webp?v=1728629777"},{"product_id":"ast-suspension-5100-comp-1-way-track-focused-coilovers-honda-civic-type-r-fk8-2017-2021-acc-h2201s","title":"AST Suspension 5100 Comp 1-Way Track Focused Coilovers Honda Civic Type R FK8 2017-2021","description":"\u003cp\u003eAST Suspension 5100 Comp 1-Way Track Focused Coilovers Honda Civic Type R FK8 2017-2021\u003c\/p\u003e\n\n\u003cp\u003eFitment:Honda Civic Type R FK8 2017-2021\u003c\/p\u003e","brand":"AST Suspension","offers":[{"title":"Default Title","offer_id":49971032817956,"sku":"#ACC-H2201S","price":4350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ACC-H2201S.webp?v=1728629779"},{"product_id":"ast-suspension-street-coilovers-with-springs-honda-civic-fl5-fwd-5100-2023-acu-h2301s","title":"AST Suspension Street Coilovers with Springs Honda Civic FL5 FWD 5100 2023+","description":"\u003cp\u003eYou want to get the best road balance for everyday use? Than 5100 STREET TCO SUSPENSION is a perfect option for you. Maximize grip by controlling rebound and rideheight of your car. These coilovers include springs and are designed to run OEM top mounts. In this set front and rear dampers utilize a coilover design. By choosing this design you prioritize adjustability and the performance of your car. Coilovers which will offer more adjustability for both damping settings and ride height, and typically provide more consistent and predictable handling characteristics. The initial setup for setting and spring rates is rooted in our extensive development and testing process. Individual preferences can easily be fine-tuned by making adjustments to the rebound knob or altering the ride height. You can adjust the rebound, means you can control the return to extension of your dampers, enabling you to attain the ideal road balance tailored to your specific requirements. With 12 distinct positions to choose from, each adjustment delivers distinct feedback and a unique driving experience. AST Suspension is a monotube design. This is a benefit for you because these dampers offer a large piston to control the adjustability of rebound damping. There is no aeration or foaming in monotube dampers, this will result in a more responsive valving. AST high pressure dampers offers additional resistance, based on the driving conditions. It will increase performance when you need it. These dampers are rebuildable, which means that if any damage or issues arise, you can have them addressed at a certified AST service center.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Kit Includes:4 Shock absorbersFitment:Honda Civic FL5 FWD 5100 2023+\u003c\/p\u003e","brand":"AST Suspension","offers":[{"title":"Default Title","offer_id":49971032883492,"sku":"#ACU-H2301S","price":3440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ACU-H2301S.webp?v=1728629784"},{"product_id":"ksport-asphalt-rally-spec-ar-coilover-kit-honda-civic-type-r-2017-2021-chd470-ar","title":"Ksport Asphalt Rally Spec AR Coilover Kit Honda Civic Type R 2017-2021","description":"\u003cp\u003eThe Ksport Asphalt Rally Coilovers are designed specifically for Asphalt Rally Racing and competition. This system features extended stroke, heavy-duty internals, and simultaneous compression and rebound adjustment. Large diameter pistons inside the shock allow for added oil capacity for increased cooling efficiency and carefully selected spring rates and shock damping settings for each application help to stabilize the vehicle and easily absorb bumps caused by uneven roads.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:36-Way Adjustable DampingInverted Steel Shock Absorber for Increased Response and Heat BuildupLarge 55mm Shock BodiesHeavy Duty Steel Lower MountsAll Metal Pillowball for Added Strength and ResponsivenessAerospace Quality Aluminum ComponentsMonotube High Pressure Design Reduces Oil LeakageCamber Adjustment on Many ModelsAdjustable Spring Perch for Height AdjustmentPillowball Top Mount for Increased Steering FeelAdjustable Lower Mount Allowing Maximum Suspension TravelDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 12\u003cbr\u003e\nRear Spring Rates(kg\/mm): 6\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic Type R FK8 2017-2021Note: Ksport Asphalt Rally kits are built to order - please allow 2-3 weeks for production and delivery.\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":49971032916260,"sku":"#CHD470-AR","price":2250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ksportcoil5.webp?v=1728629787"},{"product_id":"ksport-circuit-pro-3-way-coilover-kit-honda-civic-type-r-2017-2021-chd470-c3","title":"Ksport Circuit Pro 3 Way Coilover Kit Honda Civic Type R 2017-2021","description":"\u003cp\u003eThe Ksport Circuit Pro 3-Way Coilover kit is our top of the line system for enthusiasts and professionals alike who require maximum performance and durability. With years of engineering, testing and development, the Circuit Pro 3-Way system has been perfected in virtually every facet of motorsports, ranging from drifting to time attack or circuit driving. The uncompromising range of adjustability on the system makes it possible to win at the track while also being suitable for daily driving.\u003c\/p\u003e\n\n\u003cp\u003eThe key component to the Circuit Pro system is its utilization of remote reservoirs which provide separate adjustments for rebound and compression, as well as nitrogen gas pressure. With over 11,664 possible settings provided by each Circuit Pro coilover system, it is possible to leave no stone unturned in the quest for ultimate performance from your vehicle's suspension system. In addition to adjustability, the added oil capacity provided by the remote reservoirs increase the system's ability to dissipate heat, which leads to improved performance over long periods, such as endurance or tarmac racing, in addition to consistent performance throughout long heat cycles. These features, paired with 55mm Monotube shocks, ensure maximum durability and consistent performance.\u003c\/p\u003e\n\n\u003cp\u003eA variety of external hardware components are available on the Circuit Pro 3-Way Coilovers to completely customize the system to your vehicle. When fitting this kit to your vehicle, upper mounts are available in rubber form, pillowball or Ksport's award winning advanced pillowball mounts that offer camber and caster adjustment. To further ensure complete customization and performance, each system has been dyno tested individually and the results can be included upon request with the system at the time of purchase to aid in coilover tuning.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:External Reservoirs for Independent Rebound and Compression AdjustmentBuilt for RacingUpgraded Shock Bump StopsAdded Oil CapacityIndividually Dyno Tested55mm Monotube Shocks36-Way Adjustable DampingAerospace Quality Aluminum ComponentsAll Metal Pillowball for Added Strength and ResponsivenessAdjustable Lower Mount Allowing Maximum Suspension TravelCamber AdjustmentMonotube High Pressure Design Reduces Oil LeakageAdjustable Spring Perch for Height AdjustmentDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 16\u003cbr\u003e\nRear Spring Rates(kg\/mm): 12\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic Type R FK8 2017-2021Note: Ksport Circuit Pro 3-Way kits are built to order - please allow 2-3 weeks for production and delivery. Photos shown are for reference only. Actual application may vary.\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":49971032981796,"sku":"#CHD470-C3","price":3550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ksportcoil2.webp?v=1728629790"},{"product_id":"ksport-kontrol-pro-coilover-kit-honda-civic-type-r-2017-2021-chd470-kp","title":"Ksport Kontrol Pro Coilover Kit Honda Civic Type R 2017-2021","description":"\u003cp\u003eKsport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your vehicle, both on the street or at the track. 36 levels of damping adjustment allow fine tuning of the damper to suit both handling and comfort needs. The damping adjustment alters compression and rebound simultaneously, for more effective and user-friendly setup changes.\u003c\/p\u003e\n\n\u003cp\u003ePillowball Top Mounts: Pillow ball top mounts in the front and rear on some applications allow the vehicle to install and setup to OEM specifications. Ksport's patented upper pillow ball mount offers the same level of adjustability and performance but allows for compliance that is often required from high-demand strut applications.On applicable models, the pillowball upper mounts offer camber adjustment, saving the need for a special, separate camber kit. For enthusiasts seeking the ultimate in adjustability, Ksport's advanced upper pillow ball mount is available on some applications, giving the option for separate camber and caster adjustment.\u003c\/p\u003e\n\n\u003cp\u003eAdjustable Lower Mounts: Most applications utilize an adjustable lower mount, which means height adjustability without losing suspension travel - a problem found in many coilover systems available today. Since mounts and most pieces in the coilover system are designed from 6061 billet aluminum, the components are lightweight, durable, and rust resistant.\u003c\/p\u003e\n\n\u003cp\u003eProtection Against Corrosion: Steel shock bodies are electroplated with zinc to resist rust and protect from the elements. The shock or strut valving for each piece is matched accordingly to the spring rate, giving superior ride quality and reliability.\u003c\/p\u003e\n\n\u003cp\u003eSuperior Ride Quality \u0026amp; Reliability: The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube construction, the Monotube design dissipates heat faster and more evenly, allows finer damping adjustments, and requires more expensive design process. Aeration and cavitation issues are a lot less common in a Monotube design, which results in a more consistent ride quality. The Ksport Kontrol Pro Coilover system has been designed with professional road racing in mind, offering extremely high value and performance for any application.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:36-Way Adjustable DampingCollars and Upper Mounts Made from 6061 Aluminum with T6 for Increased HardnessAdjustable Spring Perch for Height AdjustmentAdjustable Lower Mount Allowing Maximum Suspension TravelCamber Adjustment on Many ModelsPillowball Top Mount for Increased Steering FeelMonotube High Pressure Design Reduces Oil LeakageElectroplated Body for Added Protection from Corrosion and RustDust Boot to Protect Damper Seal12 Month Limited WarrantyFront Spring Rates(kg\/mm): 9\u003cbr\u003e\nRear Spring Rates(kg\/mm): 6\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic Type R FK8 2017-2021\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":49971033014564,"sku":"#CHD470-KP","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ksportcoil10.webp?v=1728629792"},{"product_id":"ksport-kontrol-plus-2-way-coilover-kit-honda-civic-type-r-2017-2021-chd470-p2","title":"Ksport Kontrol Plus 2 Way Coilover Kit Honda Civic Type R 2017-2021","description":"\u003cp\u003eThe Ksport Kontrol Plus 2-Way Coilovers provide the ultimate in adjustability for enthusiasts and professionals seeking the maximum in performance and durability. With years of engineering, testing and development, this coilover system has been perfected in virtually every facet of motorsports, ranging from drifting to time attack or circuit driving.\u003c\/p\u003e\n\n\u003cp\u003eThe key component to these coilovers is the utilization of remote reservoirs that provide separate adjustments for rebound and compression, as well as nitrogen gas pressure. Additionally, added oil capacity provided by the remote reservoirs increase the system's ability to dissipate heat, which leads to improved performance over long periods, such as endurance or tarmac racing, in addition to consistent performance throughout long heat cycles. These features, paired with 55mm monotube shocks, ensure maximum durability and consistent performance.\u003c\/p\u003e\n\n\u003cp\u003eA variety of external hardware components are available on the Kontrol Plus 2-Way Coilovers to completely customize the system to your vehicle. When fitting this kit to your vehicle, upper mounts are available in rubber form, pillowball or Ksport's award winning advanced pillowball mounts that offer camber and caster adjustment. To further ensure complete customization and performance, each system has been dyno tested individually and the results can be included upon request with the system at the time of purchase to aid in coilover tuning.\u003c\/p\u003e\n\n\u003cp\u003eWith over 864 possible settings the Kontrol Plus 2-Way Coilovers provide the ultimate in suspension performance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:External ReservoirsDamping Adjustments60-150% Harder Damping SettingAdded Oil CapacityIndividually Dyno Tested55mm Monotube ShocksAerospace Quality Aluminum ComponentsAdvanced Pillowball MountsAdjustable Lower Mount Allowing Maximum Suspension TravelCamber AdjustmentMonotube High Pressure Design Reduces Oil LeakageAdjustable Spring Perch for Height AdjustmentDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 9\u003cbr\u003e\nRear Spring Rates(kg\/mm): 6\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic Type R FK8 2017-2021Note: Ksport Kontrol Plus 2-Way kits are built to order - please allow 2-3 weeks for production and delivery. Photos shown are for reference only. Actual application may vary.\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":49971033047332,"sku":"#CHD470-P2","price":2350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ksportcoil3.webp?v=1728629799"},{"product_id":"ksport-version-rr-road-race-coilover-kit-honda-civic-type-r-2017-2021-chd470-rr","title":"Ksport Version RR Road Race Coilover Kit Honda Civic Type R 2017-2021","description":"\u003cp\u003eThe Ksport Version RR Road Race Coilovers were carefully designed for road racing. The system features aggressive spring rates and shock valving for maximum handling and performance with acute reaction and unparalleled responsiveness on the track. Integrated with 36 levels of damping adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications, the Ksport Version RR Road Race Coilover Kit is the ultimate suspension system for serious road racing.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Built for RacingUpgraded Shock Bumpstops36-Way Adjustable DampingAerospace Quality Aluminum ComponentsAdjustable Spring Perch for Height AdjustmentAdjustable Lower Mount Allowing Maximum Suspension TravelAll Metal Pillowball for Added Strength and ResponsivenessMonotube High Pressure Design Reduces Oil LeakageCamber Adjustment on Many ModelsPillowball Top Mount for Increased Steering FeelDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 16\u003cbr\u003e\nRear Spring Rates(kg\/mm): 12\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic Type R FK8 2017-2021Note: Ksport Version RR kits are built to order - please allow 2-3 weeks for production and delivery.\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":49971033080100,"sku":"#CHD470-RR","price":2250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ksportcoil13.webp?v=1728629801"},{"product_id":"ksport-kontrol-sport-coilover-kit-honda-civic-type-r-2017-2021-chd470-sp","title":"Ksport Kontrol Sport Coilover Kit Honda Civic Type R 2017-2021","description":"\u003cp\u003eAn enhanced version of our top selling Kontrol Pro Coilover System, the Ksport Kontrol Sport Fully Adjustable Coilovers provide the ultimate in suspension technology both on the street or at the track. These coilovers build off the key features of our top selling system, including 36 levels of damping adjustment for fine tuning, and adds 30% stiffer valving and spring rates to deliver the same quality with a more aggressive and direct feel. This results in tighter cornering and quicker response times, making the Kontrol Sport Coilover Kit an ideal system for aggressive street and intermediate track use.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:36-Way Adjustable DampingMonotube High Pressure Design Reduces Oil LeakageCamber Adjustment on Many ModelsAdjustable Spring Perch for Height AdjustmentPillowball Top Mount for Increased Steering FeelAerospace Quality Aluminum ComponentsAdjustable Lower Mount Allowing Maximum Suspension TravelDust Boot to Protect Damper Seal12 Month Limited WarrantyEasy InstallationFront Spring Rates(kg\/mm): 10.5\u003cbr\u003e\nRear Spring Rates(kg\/mm): 6\u003c\/p\u003e\n\n\u003cp\u003eFitments:Honda Civic Type R FK8 2017-2021Note: Ksport Kontrol Sport kits are built to order - please allow 2-3 weeks for production and delivery.\u003c\/p\u003e","brand":"Ksport","offers":[{"title":"Default Title","offer_id":49971033145636,"sku":"#CHD470-SP","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/ksportcoil5_54a9f40f-7dab-4c2c-ae2d-3f6715afefc4.webp?v=1728629803"},{"product_id":"fortune-auto-500-series-coilovers-honda-civic-type-r-fk8-2017-2021-fa500-fk8","title":"Fortune Auto 500 Series Coilovers Honda Civic Type R FK8 2017-2021","description":"\u003cp\u003eFortune Auto engineers were tasked with a focused goal to make the Generation 7 ? 500 Series dampers the best single adjustable system on the market at a very affordable price point. All systems are completely hand-built. We insist on building bespoke suspension in order to offer the best quality control in the industry.\u003c\/p\u003e\n\n\u003cp\u003eAt Fortune Auto, we approach the science of suspension with a mentality of customization that has raised the industry?s standards of performance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:24 levels of dampening adjustable.Spring Rates: 9k front and 8k rear.FA Synthetic Shock OilFlow Digressive Piston TechnologyCustom Built and Dyno Tested5 Year Limited Manufacturers Warranty24-Step Adjustable DampersMonotube Damper with High Pressure NitrogenT6 6061 Aluminum Mounts and Camber Plates Includes Front EndlinksModularity ? Upgradeable to 2-Way or 3-Way CanisterDesigned and assembled in the USAFitment:Honda Civic Type R FK8 2017-2021Notes:Fortune Auto Products are made to order. Please allow 3-4 weeks for delivery.\u003c\/p\u003e","brand":"Fortune Auto","offers":[{"title":"Default Title","offer_id":49971033243940,"sku":"#FA500-FK8","price":1849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/4def535d953b.webp?v=1728629804"},{"product_id":"fortune-auto-500-series-coilovers-honda-civic-type-r-fk8-2017-2021-fa510cfd-fk8","title":"Fortune Auto 500 Series Coilovers Honda Civic Type R FK8 2017-2021","description":"\u003cp\u003eFortune Auto is proud to release the all new Generation 5-510 series dampers. The advanced suspension technology found in our new dampers is derived from recent sucesses in World Challenge, One Lap, and Global Time Attack. The new \"Ultra\" Double Digressive Piston (UDDP) with revised shim stacks, a unique feature on our 510 dampers, allows for tremendous amounts of low speed force that helps with driver inputs such as dive, pitch, and roll. Furthermore, the damper force greatly tapers off to provide the driver with an internal \"blow off\" effect which helps with large impacts on track, keeping the vehicle stable after hitting curbing at high speeds. After countless hours on the shock dyno and testing on the track, we are proud to offer high performance coilovers that rival many high-end European shocks.\u003c\/p\u003e\n\n\u003cp\u003e510 series damper shaft seals have 40% less drag than our previous models. This provides for less hysteresis and for superior control of driver inputs. Our new seals are made of a specially formulated Buna rubber compound that provides a great balance between reliability and performance! Since the shaft seal is the most important seal on the shock, a stronger seal will greatly improve quality and performance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Amsoil Synthetic Shock OilConcave Flow Digressive Piston TechnologyCustom Built Assembly Certificate and Dyno Graph Supplied with Shocks5 Year Limited Manufacturers Warranty24-Step Simultaneous Rebound and Compression Adjustable DampersMonotube Damper with High Pressure NitrogenT6 6061 Aluminum Mounts and Camber PlatesModularity ? Upgradeable to 2-Way or 3-Way CanisterDesigned and assembled in the USAFitment:Honda Civic Type R FK8 2017-2021Notes:Fortune Auto Products are made to order. Please allow 3-4 weeks for delivery.\u003c\/p\u003e","brand":"Fortune Auto","offers":[{"title":"Default Title","offer_id":49971033276708,"sku":"#FA510CFD-FK8","price":2449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/d005-4807.webp?v=1728629809"},{"product_id":"ohlins-road-and-track-coilovers-honda-civic-type-r-fk8-2017-2021-hos-mt00s1","title":"Ohlins Road and Track Coilovers Honda Civic Type R (FK8) 2017-2021","description":"\u003cp\u003eThe Öhlins Road \u0026amp; Track suspension gives our customers a true racing experience, with their own cars, without losing comfort when commuting to work. Our unique Dual Flow Valve (DFV) technology allows you to quickly change the stiffness of the shock absorber. When arriving to the racetrack, just turn the golden knob clockwise on the damper to set it in race mode this action changes all four areas in the damper; low and high speed compression and rebound damping.\u003c\/p\u003e\n\n\u003cp\u003eWith Öhlins Road \u0026amp; Track coil overs you will experience a car with blistering response times, improved bump absorption and a massive amount of grip to increase the safety when driving your car on the limit. The car will be easier to balance on the edge of what the tires can handle before losing grip. You will be much quicker on track. The DFV suspension prevents you from losing the racing line when hitting bumps or curbs. The DFV components within react quickly and keeps you in control of the car and in contact with the track. When driving to and from the track, just set the dampers in road mode for a more relaxed and comfortable drive, still with more grip and quicker response time than ever before.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Street Friendly with Racing Level TechnologyDual Flow Valve (DFV)Damping Adjustable (20+ available clicks of adjustment)Ride Height AdjustableCustomizable (Spring Rates, Valving, Mounts, etc)Specifications:Target Ride Height Reduction(Versus Stock):  F\/R: 20mm Front Spring Rates: 60 N\/mmRear Spring Rates: 100 N\/mmFitment:Honda Civic Type R (FK8) 2017-2021Mounting Instructions\u003c\/p\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":49971033375012,"sku":"#HOS MT00S1","price":2690.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/HOU_MT00.webp?v=1728629817"},{"product_id":"plm-silvers-neomax-coilovers-honda-civic-fl5-type-r-plm-sh1075","title":"PLM Silver's NEOMAX Coilovers Honda Civic FL5 Type R","description":"\u003cp\u003eElevate your driving experience with Silver's NEOMAX Coilovers for Honda and Acura vehicles. Engineered for precision and performance, these coilovers offer unparalleled adjustability, superior handling, and enhanced stability. Crafted with durable materials and corrosion-resistant coating, they ensure reliability in all weather conditions, making them ideal for daily driving or spirited outings. PLM is pleased to announce our partnership with Silver's Coilovers to offer track-proven suspension to our customers. Experience the ultimate suspension solution and unleash the full potential of your vehicle with Silver's NEOMAX Coilovers.\u003c\/p\u003e\n\n\n\u003cp\u003eFeatures:Adjustable T6 6061 front camber plates on all applicable McPherson style applications.Koyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.24 levels of damping adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every damping adjustment in the drivers seat.High strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.44mm piston with digressive style valving characteristics provides maximum low speed damping response for ultimate performance while simultaneously giving a comfortable ride.Mono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance.High viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock-absorption and damping control.Height adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.Cold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus.Powder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for seamless installation.Anodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.5 Year limited manufacturers warranty.\u003cbr\u003e\nFitment:Honda Civic Type R FL5 2023-2024\u003c\/p\u003e","brand":"Private Label Mfg","offers":[{"title":"Default Title","offer_id":49971033407780,"sku":"#PLM-SH1075","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/PLM-SH1075.webp?v=1728629823"},{"product_id":"truhart-streetplus-coilovers-honda-accord-civic-acura-integra-2016-2024-th-h814","title":"TruHart StreetPlus Coilovers Honda Accord|Civic|Acura Integra 2016-2024","description":"\u003cp\u003eThe StreetPlus Coilover is an ideal solution for the budget-minded buyer looking for a solution to lower their vehicle while drastically improving the handling characteristics. Our coilover is designed with an independently adjustable lower mount, allowing adjustment of the vehicles ride height without sacrificing shock travel or springpreload.\u003c\/p\u003e\n\n\u003cp\u003eOur StreetPlus Coilover is designed to provide a sporty yet comfortable ride that is suitable for daily driving and light track\/autocross use.\u003c\/p\u003e\n\n\u003cp\u003eMinimum drop from factory ride height of approximately 1.5 to maximum of approximately 4.0Front: 50mm twin-tube struts, camber platesRear: 44mm twin-tube struts, hi-lo spring adjusterKey Features:Twin-tube Shock Design.Adjustable lower mounts for ride height adjustment.Zinc plated shock bodies, powder coated lower mounts and anodized lock rings\/top mounts provide rust\/corrosion resistance.Backed an industry leading 2 Year Warranty.Civic Coupe \/ Sedan (Excludes Si)Includes Camber Plates, adjustable lower mountsFits:?2023+ Acura Integra 16-2021 Honda Civic Coupe\/Sedan, EXCL Si 2022+ Honda Civic Hatchback\/Sedan, EXCL Si\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":49971033506084,"sku":"#TH-H814","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/TH-H807.webp?v=1728629825"},{"product_id":"truhart-streetplus-coilovers-honda-accord-civic-acura-integra-2016-2024-th-h814-1","title":"TruHart StreetPlus Coilovers Honda Accord|Civic|Acura Integra 2016-2024","description":"\u003cp\u003eThe StreetPlus Coilover is an ideal solution for the budget-minded buyer looking for a solution to lower their vehicle while drastically improving the handling characteristics. Our coilover is designed with an independently adjustable lower mount, allowing adjustment of the vehicle's ride height without sacrificing shock travel or springpreload.\u003c\/p\u003e\n\n\u003cp\u003eOur StreetPlus Coilover is designed to provide a sporty yet comfortable ride that is suitable for daily driving and light track\/autocross use.\u003c\/p\u003e\n\n\u003cp\u003eMinimum drop from factory ride height of approximately 1.5 to maximum of approximately 4.0Front: 50mm twin-tube struts, camber platesRear: 44mm twin-tube struts, hi-lo spring adjusterKey Features:Twin-tube Shock Design.Adjustable lower mounts for ride height adjustment.Zinc plated shock bodies, powder coated lower mounts and anodized lock rings\/top mounts provide rust\/corrosion resistance.Backed an industry leading 2 Year Warranty.Hatchback onlyIncludes Camber Plates, adjustable lower mountsFits:?23+ Acura Integra 16+ Honda Civic\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":49971033538852,"sku":"#TH-H814-1","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/TruHart-TH-H814-1.webp?v=1728629827"},{"product_id":"truhart-streetplus-coilovers-w-front-air-cups-acura-integra-honda-civic-2016-2024-th-h814-1-vacf-20","title":"TruHart StreetPlus Coilovers w\/ Front Air Cups Acura Integra|Honda Civic 2016-2024","description":"\u003cp\u003eThe StreetPlus Coilover is an ideal solution for the budget-minded buyer looking for a solution to lower their vehicle while drastically improving the handling characteristics. VERA Air Cup Kit provides on demand height adjustment while maintaining the performance and reliability that users expect from coilovers.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from CNCed billet aluminum with a double sealed piston which with the push of a button can raise the vehicle up to 2 Inch in seconds. This height increase allows lowered vehicles to clear speed bumps, driveway inclines\/declines and trailers with ease.Compatible with the front of TruHart StreetPlus Coilovers, cup kit management system also required.Includes Camber Plates, adjustable lower mountsFits:?23+ Acura Integra 16+ Honda Civic\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":49971033604388,"sku":"#TH-H814-1-VACF-20","price":1180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/Truhart_TH-K802-VACF-20.webp?v=1728629830"},{"product_id":"truhart-streetplus-coilovers-w-front-air-cups-plus-silver-management-honda-accord-civic-acura-integra-2016-2024-th-h814-1-vacf-20-th-ack01","title":"TruHart StreetPlus Coilovers w\/ Front Air Cups Plus Silver Management Honda Accord|Civic|Acura Integra 2016-2024","description":"\u003cp\u003eCombining nearly two decades in the coilover and a decade in air suspension industries VERA brings you a solution that offers the best of both worlds. Our air cup kit provides on demand height adjustment while maintaining the performance and reliability that users expect from coilovers.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from CNCed billet aluminum with a double sealed piston which with the push of a button can raise the vehicle up to 2 Inch in seconds. This height increase allows lowered vehicles to clear speed bumps, driveway inclines\/declines and trailers with ease.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the front of TruHart StreetPlus Coilovers. This complete kit uses a pneumatic push action Valve that can easily be integrated into your vehicles dash or center console. The vehicle will lift to full height when the Valve switch is pushed up and dropped back to standard height when the Valve switch is pressed down.(2) Air CupsVERA 100C Compressor Pneumatic ValveAll necessary fittings, relays and air linesFits:?23+ Acura Integra 16+ Honda Civic\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":49971033669924,"sku":"#TH-H814-1-VACF-20+TH-ACK01","price":1360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/TH-H814-1-VACF-20_2BTH-ACK01-GHNV.webp?v=1728629834"},{"product_id":"truhart-streetplus-coilovers-w-front-air-cups-plus-gold-control-system-honda-accord-civic-acura-integra-2016-2024-th-h814-1-vacf-20-th-ack02","title":"TruHart StreetPlus Coilovers w\/ Front Air Cups Plus Gold Control System Honda Accord|Civic|Acura Integra 2016-2024","description":"\u003cp\u003eCombining nearly two decades in the coilover and a decade in air suspension industries VERA brings you a solution that offers the best of both worlds. Our air cup kit provides on demand height adjustment while maintaining the performance and reliability that users expect from coilovers.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from CNCed billet aluminum with a double sealed piston which with the push of a button can raise the vehicle up to 2 Inch in seconds. This height increase allows lowered vehicles to clear speed bumps, driveway inclines\/declines and trailers with ease.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the front of TruHart StreetPlus Coilovers. This complete kit uses a 3-way electronic Valve with LED lit button that can easily be integrated into your vehicles dash. The vehicle will lift to full height when the button is engaged and drop back to standard height when pressed again to release.(2) Air Cups1.5 Gallon Seamless aluminum tank with mounting bracketsVERA 100C CompressorIMI 3-way Valve LED Backlit SwitchAll necessary fittings, switches and air linesFits:?23+ Acura Integra 16+ Honda Civic\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":49971033702692,"sku":"#TH-H814-1-VACF-20+TH-ACK02","price":1480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/TH-H814-1-VACF-20_2BTH-ACK02-GHNV.webp?v=1728629838"},{"product_id":"truhart-streetplus-coilovers-w-front-air-cups-plus-gold-tankless-control-system-honda-accord-civic-acura-integra-2016-2024-th-h814-1-vacf-20-th-ack03","title":"TruHart StreetPlus Coilovers w\/ Front Air Cups Plus Gold Tankless Control System Honda Accord|Civic|Acura Integra 2016-2024","description":"\u003cp\u003eCombining nearly two decades in the coilover and a decade in air suspension industries VERA brings you a solution that offers the best of both worlds. Our air cup kit provides on demand height adjustment while maintaining the performance and reliability that users expect from coilovers.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from CNCed billet aluminum with a double sealed piston which with the push of a button can raise the vehicle up to 2 Inch in seconds. This height increase allows lowered vehicles to clear speed bumps, driveway inclines\/declines and trailers with ease.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the front of Truhart StreetPlus Coilovers. This complete kit uses a 3-way electronic Valve with LED lit button that can easily be integrated into your vehicles dash.\u003c\/p\u003e\n\n\u003cp\u003eThe vehicle will lift to full height when the button is engaged and drop back to standard height when pressed again to release. The functionality of this kit is similar to that of our standard electronic kit but removes the tank and upgrades the compressor, ideal for situations where space is limited and a tank fit.(2) Air CupsVIAIR 444C CompressorIMI 3-way Valve LED Backlit SwitchAll necessary fittings, relays and air linesFits:?23+ Acura Integra 16+ Honda Civic\u003c\/p\u003e","brand":"Truhart USA","offers":[{"title":"Default Title","offer_id":49971033735460,"sku":"#TH-H814-1-VACF-20+TH-ACK03","price":1520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/TH-H814-1-VACF-20_2BTH-ACK03-GHNV.webp?v=1728629841"},{"product_id":"tein-rx1-coilover-kit-honda-civic-type-r-2000-ff-fl5-fk8-2017-09-jpn-vshk8-m1as4","title":"TEIN RX1 Coilover Kit Honda Civic Type-R 2000 FF FL5 FK8 2017.09+JPN","description":"\u003cp\u003eFull-Length and Adjustable Damping shock absorber with Camber adjustment for Minivan.\u003c\/p\u003e\n\n\u003cp\u003eIn regular shock absorbers, bump rubber is vital to avoid damage from bottoming out. Unfortunately it causes instability, because when a large impact compresses it, energy thus amassed is released upwards.\u003c\/p\u003e\n\n\u003cp\u003eRX1 however uses the Hydraulic Bump Stopper to convert the impact to thermal energy and absorb it. This strongly reduces the shock, and there's no repulsion force.\u003c\/p\u003e\n\n\u003cp\u003eHydraulic Bump Stopper (H.B.S.)!\u003cbr\u003e\nStandard Shock Absorbers with Bump Rubber\u003cbr\u003e\nUpward jolting and repeated bouncing, driving over a bump. It takes a while to stabilize.\u003cbr\u003e\nThe impact is absorbed; no bouncing and rapid stabilization.\u003cbr\u003e\nEven in a fully seated and loaded minivan, jolts from the rough road are reduced.\u003cbr\u003e\nRide comfort can be enjoyed in all seats!\u003c\/p\u003e\n\n\u003cp\u003eAbout Bump Rubber\u003cbr\u003e\nMade from urethane or rubber, it buffers the impact at full compression, preventing damage to the vehicle body or shock absorbers.\u003c\/p\u003e\n\n\u003cp\u003eHow the H.B.S. Mechanism Works\u003cbr\u003e\nShock Absorbers with H.B.S.\/Shock Absorbers with H.B.S.\u003c\/p\u003e\n\n\u003cp\u003eIn regular shock absorbers, bump rubber is vital to avoid damage from bottoming out. Unfortunately it causes instability, because when a large impact compresses it, energy thus amassed is released upwards.\u003c\/p\u003e\n\n\u003cp\u003eRX1 however uses the Hydraulic Bump Stopper to convert the impact to thermal energy and absorb it. This strongly reduces the shock, and there's no repulsion force.\u003c\/p\u003e\n\n\u003cp\u003eH.B.S.: A Must for World-Class Rallies!\u003c\/p\u003e\n\n\u003cp\u003eRally Scene\u003cbr\u003e\nSwiftly absorbing the impact of big jumps, H.B.S. produces a much more stable vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe Hydraulic Bump Stopper (H.B.S.) Mechanism\u003cbr\u003e\nInactive H.B.S.\/H.B.S. Activated\u003cbr\u003e\nIn shock absorbers with inactive or no H.B.S., the operative valve (green) floats, and oil flows freely through the base valve ports. Resistance to the flow from the shim stack then, causes damping force.\u003cbr\u003e\nNear full compression, when the piston rod strokes beyond a predetermined point, the operative valve is pushed down and activates H.B.S.: the base valve ports are narrowed, blocking the oil flow. This results in high damping force.\u003cbr\u003e\nA relief valve serves to suppress sudden damping force increase, when the pressure in the cylinder exceeds its regular level.\u003cbr\u003e\nThe setup of the H.B.S. mechanism is optimized per vehicle model, with the right activation point and damping force.\u003cbr\u003e\nTo avoid damages\/breakages, conventional bump rubbers must also be fitted\/used with H.B.S.-equipped dampers.\u003c\/p\u003e\n\n\u003cp\u003eFull-Length Adjustable\u003cbr\u003e\nLower brackets on strut type suspensions come with camber angle adjustment feature. Camber angle can be adjusted by rotating the eccentric washer 180°. This feature can enable camber angle adjustment, even if it can not be adjusted with the upper mounts.\u003cbr\u003e\nExcept some models (e.g. strut with inset type brackets)\u003c\/p\u003e\n\n\u003cp\u003eFull-Length Adjustable\u003c\/p\u003e\n\n\u003cp\u003eAdvantage: adjusting ride height has little effect on ride quality.\u003cbr\u003e\nSame stroke length Changed full length\u003c\/p\u003e\n\n\u003cp\u003eIn addition to combining a low down style with ride comfort, this system offers more setup options for sport driving too.\u003c\/p\u003e\n\n\u003cp\u003eTwin-Tube\u003cbr\u003e\nCompared to the regular mono-tube system, twin-tube attains longer strokes with a smaller repulsive force, resulting in high ride comfort.\u003c\/p\u003e\n\n\u003cp\u003eMono-Tube \/ Twin-Tube\u003cbr\u003e\nRoads may have all sorts of surface conditions. This calls for shock absorbers with ample stroke, that operate smoothly.\u003cbr\u003e\nThanks to flexible strokes, you can negotiate gaps and bumps steadily on rough roads, meaning a smooth ride at low speed and stability at high speed.\u003c\/p\u003e\n\n\u003cp\u003eDamping Force Adjustment\u003cbr\u003e\nRX1 features 16-level damping force adjustment, for simultaneous adjustment of compression and rebound.\u003cbr\u003e\nModify ride comfort and handling according to your preference, changing the properties of the shock absorber with the adjustment dial.\u003c\/p\u003e\n\n\u003cp\u003eAdjustment Dial\u003cbr\u003e\nAdjust to Suit Driving Conditions\u003cbr\u003e\nThe above are examples; actual settings vary according to the vehicle's circumstances.\u003c\/p\u003e\n\n\u003cp\u003eMounts Included\u003c\/p\u003e\n\n\u003cp\u003eAn easy-to-install mount, exclusively designed for each vehicle model, is included in the product kit.\u003cbr\u003e\nReinforced Rubber Upper Mount\u003cbr\u003e\n(for Strut)\u003c\/p\u003e\n\n\u003cp\u003ePillow Ball Upper Mount\u003cbr\u003e\n(for Strut)\u003cbr\u003e\nWe have devised a suitable mount for each vehicle type.\u003c\/p\u003e\n\n\u003cp\u003ePillow ball upper mounts for front strut suspensions feature camber adjustment.\u003c\/p\u003e\n\n\u003cp\u003eCamber Angle Adjustment:\u003cbr\u003e\nThis means changing the contact patch of the tires during cornering, by changing the angle at which the tires touch the ground.\u003c\/p\u003e\n\n\u003cp\u003eExample of Adjustment Negative camber:\u003cbr\u003e\nReplacement Service\u003cbr\u003e\nFor this product we offer not overhaul, but a replacement service.\u003c\/p\u003e\n\n\u003cp\u003eWhen your shock absorber wears out...Purchase only a new shock absorber. As good as new!\u003c\/p\u003e\n\n\u003cp\u003eOur replacement service revives your shock absorber, by replacing the main part. It allows you to buy the shock absorber itself without the exterior parts like the upper mount, lower bracket, spring, etc.\u003cbr\u003e\nOverhaul Issues \/ Replacement Service\u003c\/p\u003e\n\n\u003cp\u003eRevalving is also available!\u003c\/p\u003e\n\n\u003cp\u003eDamping Force Modification\u003cbr\u003e\n entails changing damping force to suit your driving conditions or preferences, by re-arranging the shock absorbers' internal components.\u003c\/p\u003e\n\n\u003cp\u003eStroke Modification\u003cbr\u003e\nThis entails changing the stroking distance to suit your driving conditions or preferences, by e.g. replacing or modifying the shock absorbers' internal components.\u003c\/p\u003e\n\n\u003cp\u003eEDFC Compatible\u003cbr\u003e\nThe EDFC Series offer easy damping force adjustment from the driver's seat.\u003cbr\u003e\nSome vehicle models are not compatible\u003cbr\u003e\nA motor instead of adjustment dial\u003cbr\u003e\nRemote adjustment from the cockpit!\u003c\/p\u003e\n\n\u003cp\u003eEDFC Series Lineup\u003c\/p\u003e\n\n\u003cp\u003eEDFC5\u003cbr\u003e\nAutomatic \u0026amp; Flexible Adjustment with New Jerk-Reactive Control for Enhanced Driving Experience\u003cbr\u003e\nIndividual Wheel Control Jerk-Reactive Adjustment\u003cbr\u003e\nCornering-Reactive Accel\/Deceleration-Reactive\u003cbr\u003e\nSpeed-Reactive Wireless Control\u003cbr\u003e\nAI (Learning Function)\u003c\/p\u003e\n\n\u003cp\u003eEDFC Active Pro\u003cbr\u003e\nThe Finest in Electronic Damping Force Controllers\u003cbr\u003e\nIndividual Wheel Control Cornering-Reactive\u003cbr\u003e\nAccel\/Deceleration-Reactive Speed-Reactive\u003cbr\u003e\nWireless Control\u003cbr\u003e\nHigh Durability and Reliability\u003cbr\u003e\nOptimal Dust Boot\u003c\/p\u003e\n\n\u003cp\u003eDust Boot\u003cbr\u003e\nThanks to its smooth compression and high durability, the dust boot guards the piston rod from damage, and keeps foreign material out of the shock absorber. (Some vehicles use their OE dust boots\u003c\/p\u003e\n\n\u003cp\u003eNo-Sag Spring\u003c\/p\u003e\n\n\u003cp\u003eSpring\u003cbr\u003e\nCold formed with SAE9254 steel (minimum tensile strength 200 kgf\/mm2), our springs are outstandingly sag-proof and boast extremely stable quality.\u003c\/p\u003e\n\n\u003cp\u003eSuperior rust protection is ensured with a highly durable powder coating that does not peel or flake. Our high-quality springs can be used without worries, in any conditions.\u003c\/p\u003e\n\n\u003cp\u003eHigh-Performance Damper Oil\u003cbr\u003e\nDamper Oil\u003cbr\u003e\nSince TEIN's damper oil maintains a stable viscosity in a broad temperature range, it sustains smooth strokes and reliable damping force in a variety of circumstances.\u003c\/p\u003e\n\n\u003cp\u003eDue to excellent anti-foaming properties, it's resistant to cavitation (bubble forming). Since it's strong against heat too, it's suitable for fierce sport driving as well.\u003c\/p\u003e\n\n\u003cp\u003eFurthermore, the damper oil keeps up its superior performance long-term, because it's resistant to deterioration over time.\u003c\/p\u003e\n\n\u003cp\u003eRust-Proofing\u003c\/p\u003e\n\n\u003cp\u003eTEIN-Green Powder Coating\u003c\/p\u003e\n\n\u003cp\u003ePowder Coating\u003cbr\u003e\nA bright TEIN-green powder paint is used on elements such as the upper mount and lower bracket. Our powder coating technique produces an extremely strong and durable film. No harmful organic solvents are used, for minimal pollution.\u003c\/p\u003e\n\n\u003cp\u003eSuperior durability and corrosion resistance are achieved by TEIN's patented 2-Layer, 1-Bake powder coating method, which uses 2 layers of anti-rust paint on a blasted surface. (Japanese patent number 4347712)\u003c\/p\u003e\n\n\u003cp\u003eSpecial Surface Treatment 'ZT Coating'\u003c\/p\u003e\n\n\u003cp\u003eZT Coating\u003cbr\u003e\nOur unique special surface treatment ZT Coating makes the paint strong against chipping by flying gravel, and further enhances its corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eWith zero claims for stuck parts due to rust in 500,000 shock absorbers, TEIN shock absorbers are amazingly rustproof. We're confident of customer satisfaction even in coastal areas or regions with heavy snowfall.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Position: FrontUpper Mount: Camber ADJRide Height Change(inch):-1.2Ride Height Adjustable Range (inch)Max Low-Hi: -2.4 to 0.4Recommended Low-Hi: -1.6 to -0.8Spring: Rate(lbs\/in Kgf\/m):Free Length: 448I.D.(mm) 8Position: RearUpper Mount: R\/URide Height Change(inch):-1.2Ride Height Adjustable Range (inch)Max Low-Hi: -2.4 to 0.4Recommended Low-Hi: -1.6 to -0.8Spring: Rate(lbs\/in Kgf\/m)Free Length: 448I.D.(mm) 8Fitment:Honda Civic Type-R 2000 FF FK8 2017.09-2022.08JPNHonda Civic Type-R 2000 FF FK8 2017-2021USAHonda Civic Type-R 2000 FF FL5 2022.09+JPNHonda Civic Type-R 2000 FF FL5 2023+USANote:Error Canceller Included. Rr: Use Of Edfc Series Is Recommended, As It'S Difficult To Adjust Damping Force By Hand Due To Vehicle Structure.\u003c\/p\u003e","brand":"TEIN","offers":[{"title":"Default Title","offer_id":49971033768228,"sku":"#VSHK8-M1AS4","price":1650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/Tein_Flex_AVS.webp?v=1728629843"},{"product_id":"rs-r-best-i-active-coilover-honda-civic-type-r-fl5-2022-xbih034ma","title":"RS-R Best-I Active Coilover Honda Civic Type R FL5 2022+","description":"\u003cp\u003eOne of our newest Active Series can be used with the factory AVS and DDS system equipped on some models of Lexus, Toyota and Infiniti. The AVS and DDS systems do not function on current aftermarket shocks and Coilover, but our Active Series helps to retain the factory controls. Now the dampening and control systems still function, while providing you with a comfortable ride and performance.\u003c\/p\u003e\n\n\u003cp\u003eThe RS-R Coilover are all Monotube hand assembled systems specifically designed to improve ride quality, performance, and comfort. Utilizing components such as; laser cut upper mounts, hand welded lower brackets, vehicle specific valving, are all assembled by hand to ensure quality and detail.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Preset Approximate HeightFront: -25mm to -30mm (-1.0in to -1.2in)Rear: -30mm to -35mm (-1.2in to -1.4in)Maximum Adjustment RangeFront: +5mm to -50mm (-0.2in to -2.0in)Rear: -10mm to-55mm (-0.4in to -2.2in)Recommended Adjustment RangeFront: -5mm to -45mm (-0.2in to -1.8in)Rear: -10mm to -55mm (-0.4in to -2.2in)Spring RateFront: 8.00kg\/mmRear: 6.00kg\/mmAdditional InformationCompatible with the Factory Adaptive Damper SystemFactory rear upper mount needs to be re-usedDampers are 36 way adjustable in the front and the rearWarranty: 1 Year \/ 12,000 miles from the day of purchaseIncluded but not pictured: hex and allen wrench, rubber and poly seat for rear adjuster, flange nut for rear, zip ties, and harness for rearFitment:Honda Civic Type R FL5 2022+\u003c\/p\u003e","brand":"RS-R","offers":[{"title":"Default Title","offer_id":49971033800996,"sku":"#XBIH034MA","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/XBIH034MA.webp?v=1728629859"},{"product_id":"rs-r-sports-i-club-racer-coilovers-honda-civic-type-r-2023-2024-xnsph035mp","title":"RS-R Sports-i Club Racer Coilovers Honda Civic Type R 2023-2024","description":"\u003cp\u003eFine tuned for competition, our RS-R Club Racer Series offers unquestionable performance with its track dedicated setup.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003ePreset Approximate HeightFront: -20mm to -25mm (-0.8in to -1.0in)Rear: -30mm to -35mm (-1.2in to -1.4in)Maximum Adjustment RangeFront: +15mm to -50mm (+0.6in to -2.0in)Rear: -20mm to -70mm (-0.8in to -2.8in)Recommended AdjustmentsFront: +5mm to -45mm (+0.2in to -1.8in)Rear: -20mm to -70mm (-0.8in to -2.8in)Spring Rates:Front: 10kg\/mmRear: 13kg\/mmFitment:Honda Civic Type R 2023-2024\u003c\/p\u003e","brand":"RS-R","offers":[{"title":"Default Title","offer_id":49971033833764,"sku":"#XNSPH035MP","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/XNSPH035MP.webp?v=1728629868"},{"product_id":"hks-2022-honda-civic-type-r-hipermax-r-fl5-full-kit-w-canceller-kit","title":"HKS 2022+ Honda Civic Type R Hipermax R FL5 Full Kit w\/ Canceller Kit","description":"HKS 2022+ Honda Civic Type R Hipermax R FL5 Full Kit w\/ Canceller Kit","brand":"HKS","offers":[{"title":"Default Title","offer_id":50877067624740,"sku":"HKS80310-AH005C","price":3680.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/files\/372f191852ea13b66ab2745e68795d14.png?v=1752784333"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/collections\/honda-civic-type-r-my23-3_fbbc76de-0c7b-4cb4-9997-332e28f25c17.jpg?v=1729476038","url":"https:\/\/www.built2race.com\/collections\/suspension-honda-23-civic-type-r.oembed","provider":"Built2Race","version":"1.0","type":"link"}