{"title":"Intakes | Exhausts","description":"","products":[{"product_id":"aem-induction-aem-cold-air-intake-system-nissan-350z-2007-2008-3-5l-v6-model-21-677c","title":"AEM Induction AEM Cold Air Intake System Nissan 350Z 2007-2008 3.5L V6","description":"\u003cp\u003eThe AEM 21-677C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through dual oversized AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. The intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-677C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.75 in (70 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.75 in (70 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 8Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 28 in (711 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.75 in (70 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 28 in (711 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.75 in (70 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-202DKStreet Legal In All US States: YesTitle: AEM AEM-21-677C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.3 lb (4.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879997632804,"sku":"Model #21-677C","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-677C.jpg?v=1679274837"},{"product_id":"aem-induction-aem-cold-air-intake-system-nissan-350z-2007-2008-3-5l-v6-model-21-677p","title":"AEM Induction AEM Cold Air Intake System Nissan 350Z 2007-2008 3.5L V6","description":"\u003cp\u003eThe AEM 21-677P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through dual oversized AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. The intake tubes are constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-677P vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.75 in (70 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.75 in (70 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 8Color: PolishedCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: PolishedIntake Pipe Inlet Length: 28 in (711 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.75 in (70 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 28 in (711 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.75 in (70 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-202DKStreet Legal In All US States: YesTitle: AEM AEM-21-677P AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.3 lb (4.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879997698340,"sku":"Model #21-677P","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-677P.jpg?v=1679274838"},{"product_id":"aem-induction-aem-short-ram-intake-system-nissan-350z-2003-2006-3-5l-v6-model-22-547b","title":"AEM Induction AEM Short Ram Intake System Nissan 350Z 2003-2006 3.5L V6","description":"\u003cp\u003eThe AEM 22-547B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this intake system, allowing air to enter the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The air filter is protected by a heat shield which is designed to protect the filter from hot engine air in order to preserve horsepower gains. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-547B vehicle applications to determine the legal status for each vehicle.AEM's Performance Short Ram Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly. The intake tube has an attractive yet durable powder-coated finish.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.25 in (83 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.25 in (83 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 3Color: BlueCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: BlueIntake Pipe Inlet Length: 32 in (813 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.25 in (83 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 32 in (813 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.25 in (83 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Short Ram Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2110DKStreet Legal In All US States: YesTitle: AEM AEM-22-547B AEM Short Ram Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8.5 lb (3.9 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Blue (SRS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879997731108,"sku":"Model #22-547B","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-22-547B.jpg?v=1679274840"},{"product_id":"aem-induction-aem-short-ram-intake-system-nissan-350z-2003-2006-3-5l-v6-model-22-547r","title":"AEM Induction AEM Short Ram Intake System Nissan 350Z 2003-2006 3.5L V6","description":"\u003cp\u003eThe AEM 22-547R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this intake system, allowing air to enter the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The air filter is protected by a heat shield which is designed to protect the filter from hot engine air in order to preserve horsepower gains. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-547R vehicle applications to determine the legal status for each vehicle.AEM's Performance Short Ram Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly. The intake tube has an attractive yet durable powder-coated finish.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.25 in (83 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.25 in (83 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 3Color: RedCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: RedIntake Pipe Inlet Length: 32 in (813 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.25 in (83 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 32 in (813 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.25 in (83 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Short Ram Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2110DKStreet Legal In All US States: YesTitle: AEM AEM-22-547R AEM Short Ram Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8.5 lb (3.9 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (SRS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879997763876,"sku":"Model #22-547R","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-22-547R.jpg?v=1679274841"},{"product_id":"aem-induction-aem-cold-air-intake-system-nissan-350z-2003-2006-3-5l-v6-model-21-547c","title":"AEM Induction AEM Cold Air Intake System Nissan 350Z 2003-2006 3.5L V6","description":"\u003cp\u003eThe AEM 21-547C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well behind the front bumper which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-547C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 28 in (711 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 33 in (838 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-21-547C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 7 lb (3.2 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879997796644,"sku":"Model #21-547C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-547C.jpg?v=1679274843"},{"product_id":"aem-induction-aem-electronically-tuned-intake-system-nissan-370z-2009-2011-3-7l-v6-model-41-1001p","title":"AEM Induction AEM Electronically Tuned Intake System Nissan 370Z 2009-2011 3.7L V6","description":"\u003cp\u003eThe AEM 41-1001P Electronically Tuned Air Intake System represents the next generation of cold air intake technology resulting in larger horsepower and torque gains for specific Nissan 370Z models by precisely tuning mass air flow sensor signals to the engine. The restrictive factory air filters and air intake housing are replaced with this advanced AEM air intake system. Air enters the system through dual AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The intake tubing keeps a constant diameter throughout its length allowing larger volumes of air to pass through than more traditional cold air intake systems. The AEM intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to also accommodate the engine's factory emissions control devices including the PCV hose and mass airflow sensor. A replacement windshield washer reservoir is also included to allow for the air filters to be relocated above the front wheel wells. The tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.AEM's Electronically Tuned Air Intake System delivers additional power and acceleration with electronically tuned mass air flow sensor readings integrated into a high air flow air intake system.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5 in (127 mm)Air Filter Large End Diameter: 5.5 in (140 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.75 in (70 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.75 in (70 mm)Air Filter Washable: YesCARB EO Number: D-670-10Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 10Color: PolishedCoupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 9.67 HP @ 7100 RPMHorse Power Increase: 10 HPIntake Pipe Color \/ Finish: PolishedIntake Pipe Inlet Length: 48 in (1219 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.75 in (70 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 48 in (1219 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.75 in (70 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-202DOSKRPM: 7100Street Legal In All US States: YesTitle: AEM AEM-41-1001P AEM Electronically Tuned Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 14.9 lb (6.8 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (ETI)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879997862180,"sku":"Model #41-1001P","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-41-1001P.jpg?v=1679274844"},{"product_id":"aem-induction-aem-cold-air-intake-system-nissan-370z-2009-2020-3-7l-v6-model-21-821ds","title":"AEM Induction AEM Cold Air Intake System Nissan 370Z 2009-2020 3.7L V6","description":"\u003cp\u003eThe 21-821DS Performance Cold Air Intake System produces horsepower and torque gains by replacing the restrictive air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 370Z models. This system replaces both the left and right side intakes. The AEM Dryflow synthetic washable air filter does not require oiling and can be used up to 100,000 miles before servicing is needed (depending on driving conditions). The heatshield is a two piece design and also utilizes the factory air ducting. The intake tube is constructed from mandrel bent aluminum and has a durable gray powder coat finish. This air intake system was developed to accommodate the mass air flow sensor and PCV hose. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-821DS vehicle applications to determine the legal status for each vehicle.The 21-821DS Performance Cold Air Intake System produces horsepower and torque gains by replacing the restrictive air filter and air intake housing. This system replaces both the left and right side intakes.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Material: Non-woven SyntheticAir Filter Outlet Shape: RoundAir Filter Washable: YesCalifornia Restricted: Not legal for sale or use in CaliforniaClamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: RegularClamps Included: 6Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 15 HP @ 7100 RPMHorse Power Increase: 15 HPIntake Pipe Color \/ Finish: BlackIntake Pipe Material: High-Density Cross-Linked PolyethyleneMass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: CorrugatedPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-202DOSKRPM: 7100Street Legal In All US States:  NoTitle: AEM AEM-21-821DS AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 13.8 lb (6.3 kg)Notes:California Air Resources Board Exempt: No; AEM - Polyethylene Intake System; Black (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879997927716,"sku":"Model #21-821DS","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-821DS.jpg?v=1679274846"},{"product_id":"aem-induction-aem-cold-air-intake-system-chevrolet-6-2l-v8-model-21-859c","title":"AEM Induction AEM Cold Air Intake System Chevrolet 6.2L V8","description":"\u003cp\u003eThis Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Material: Non-woven SyntheticAir Filter Outlet Shape: RoundAir Filter Washable: YesCalifornia Restricted: Not legal for sale or use in CaliforniaClamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: Worm GearClamps Included: 5Coupler Color\/Finish: BlackCouplers Included: 2Estimated Horsepower Gain: 18.9 HP @ 4744 RPMHorse Power Increase: 19 HPOil Included: No Filter Oil RequiredPackage Material: CorrugatedPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2100DKRPM: 4744Street Legal In All US States:  NoTitle: AEM AEM-21-859C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 12.4 lb (5.6 kg)Notes:California Air Resources Board Exempt: No; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879998157092,"sku":"Model #21-859C","price":431.99,"currency_code":"USD","in_stock":true}]},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-civic-2006-2011-2-0l-4-cyl-model-21-685p","title":"AEM Induction AEM Cold Air Intake System Honda Civic 2006-2011 2.0L 4-Cyl","description":"\u003cp\u003eThe AEM 21-685P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic SI and Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, a couple replacement silicone breather hoses as well as a replacement radiator hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-685P vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-21Clamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: MiniClamps Included: 11Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 6.27 HP @ 5100 RPMHorse Power Increase: 6 HPIntake Pipe Color \/ Finish: PolishedIntake Pipe Inlet Length: 7 in (178 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 23 in (584 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKRPM: 5100Street Legal In All US States: YesTitle: AEM AEM-21-685P AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8.2 lb (3.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-21; AEM - Metal Intake System; Polished (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879998452004,"sku":"Model #21-685P","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-685P.jpg?v=1679274847"},{"product_id":"aem-induction-aem-dual-chamber-intake-system-honda-civic-1996-2000-1-6l-4-cyl-model-24-6014c","title":"AEM Induction AEM Dual Chamber Intake System Honda Civic 1996-2000 1.6L 4-Cyl","description":"\u003cp\u003eThe AEM 24-6014C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda Civic EX models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temp sensor, cam cover breather hose and air recirculation tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6014C vehicle applications to determine the legal status for each vehicle.AEM's Performance Dual Chamber Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly with a dual tubed air intake tuned to maximize horsepower and torque.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.5 in (89 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.5 in (89 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 5Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 28 in (711 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.5 in (64 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 24 in (610 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.5 in (89 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Dual Chamber Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-204DKStreet Legal In All US States: YesTitle: AEM AEM-24-6014C AEM Dual Chamber Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10 lb (4.5 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (V2)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879998583076,"sku":"Model #24-6014C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-24-6014C.jpg?v=1679274850"},{"product_id":"aem-induction-aem-dual-chamber-intake-system-honda-civic-1999-2000-1-6l-4-cyl-model-24-6017c","title":"AEM Induction AEM Dual Chamber Intake System Honda Civic 1999-2000 1.6L 4-Cyl","description":"\u003cp\u003eThe AEM 24-6017C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda Civic Si models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the cam cover breather and intake air temp sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6017C vehicle applications to determine the legal status for each vehicle.AEM's Performance Dual Chamber Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly with a dual tubed air intake tuned to maximize horsepower and torque.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 4 in (102 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 4 in (102 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 28 in (711 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.75 in (70 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 24 in (610 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 4 in (102 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Dual Chamber Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-205DKStreet Legal In All US States: YesTitle: AEM AEM-24-6017C AEM Dual Chamber Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.6 lb (4.8 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (V2)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879998779684,"sku":"Model #24-6017C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-24-6017C.jpg?v=1679274851"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-civic-2006-2011-2-0l-4-cyl-model-21-685c","title":"AEM Induction AEM Cold Air Intake System Honda Civic 2006-2011 2.0L 4-Cyl","description":"\u003cp\u003eThe AEM 21-685C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic SI and Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, a couple replacement silicone breather hoses as well as a replacement radiator hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-685C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-21Clamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: MiniClamps Included: 11Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 6.27 HP @ 5100 RPMHorse Power Increase: 6 HPIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 7 in (178 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 23 in (584 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKRPM: 5100Street Legal In All US States: YesTitle: AEM AEM-21-685C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8.2 lb (3.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-21; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879998976292,"sku":"Model #21-685C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-685C.jpg?v=1679274857"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-civic-1996-2000-1-6l-4-cyl-model-21-413c","title":"AEM Induction AEM Cold Air Intake System Honda Civic 1996-2000 1.6L 4-Cyl","description":"\u003cp\u003eThe AEM 21-413C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic LX, DX and CX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-413C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.5 in (64 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.5 in (64 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 9Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 2.5 in (64 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.5 in (64 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 29 in (737 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.5 in (64 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-201DKStreet Legal In All US States: YesTitle: AEM AEM-21-413C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 7.3 lb (3.3 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879999598884,"sku":"Model #21-413C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-413C.jpg?v=1679274869"},{"product_id":"aem-induction-aem-dual-chamber-intake-system-honda-civic-1992-1995-manual-model-24-6001c","title":"AEM Induction AEM Dual Chamber Intake System Honda Civic 1992-1995 Manual","description":"\u003cp\u003eThe AEM 24-6001C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda Civic, Civic SI, LX, EX, DX and DX Hatchback models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6001C vehicle applications to determine the legal status for each vehicle.AEM's Performance Dual Chamber Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly with a dual tubed air intake tuned to maximize horsepower and torque.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.5 in (89 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.5 in (89 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 42 in (1067 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.5 in (64 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 42 in (1067 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.5 in (64 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Dual Chamber Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-204DKStreet Legal In All US States: YesTitle: AEM AEM-24-6001C AEM Dual Chamber Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10 lb (4.5 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (V2)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879999664420,"sku":"Model #24-6001C","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-24-6001C.jpg?v=1679274871"},{"product_id":"aem-induction-aem-short-ram-intake-system-honda-model-22-401p","title":"AEM Induction AEM Short Ram Intake System Honda","description":"\u003cp\u003eThe AEM 22-401P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, vacuum lines and inlet air temperature sensor (where equipped). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-401P vehicle applications to determine the legal status for each vehicle.AEM's Performance Short Ram Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly. The intake tube has an attractive yet durable powder-coated finish.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.5 in (64 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.5 in (64 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 5Color: PolishedCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: PolishedIntake Pipe Inlet Length: 28 in (711 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.5 in (64 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 28 in (711 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.5 in (64 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Short Ram Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-201DKStreet Legal In All US States: YesTitle: AEM AEM-22-401P AEM Short Ram Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 6 lb (2.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (SRS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44879999729956,"sku":"Model #22-401P","price":399.99,"currency_code":"USD","in_stock":true}]},{"product_id":"aem-induction-aem-cold-air-intake-system-model-21-875ds","title":"AEM Induction AEM Cold Air Intake System","description":"\u003cp\u003eThis Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: YesAir Filter Color: RedAir Filter Material: Non-woven SyntheticAir Filter Outlet Shape: RoundAir Filter Washable: YesCalifornia Restricted: Not legal for sale or use in CaliforniaClamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: Worm GearClamps Included: 2Coupler Color\/Finish: BlackCouplers Included: 1Estimated Horsepower Gain: 7.6 HP @ 5000 RPMHorse Power Increase: 8 HPIntake Pipe Color \/ Finish: BlackIntake Pipe Material: High-Density Cross-Linked PolyethyleneMass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: CorrugatedPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-1016DKRPM: 5000Street Legal In All US States:  NoTitle: AEM AEM-21-875DS AEM Cold Air Intake SystemTUV Approved (Europe): NoWeight: 10 lb (4.5 kg)Notes:California Air Resources Board Exempt: No\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000024868,"sku":"Model #21-875DS","price":539.99,"currency_code":"USD","in_stock":true}]},{"product_id":"aem-cold-air-intake-system-toyota-gt-86-subaru-brz-scion-frs-2013-2021-model-21-853c","title":"AEM Cold Air Intake System Toyota GT-86 | Subaru BRZ | Scion FRS 2013-2021","description":"\u003cp\u003eThis Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.\u003c\/p\u003e \n\n\u003cp\u003eFeatures:Increased horsepowerHeat shield with edge trim liningLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited WarrantyProduct Specifications:Estimated Horsepower Gain 7.8 HP @ 6494 RPMReplacement Filter: 21-204DKAir Filter Color: RedAir Filter Material: Non-woven SyntheticAir Filter Outlet Shape: RoundClamps Included: 3Clamp Material: Stainless SteelClamp Style: Worm GearCouplers Included: 1Intake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Materia:l AluminumStreet Legal In All US States: NoTUV Approved (Europe): NoWeight: 11.5 lb (5.2 kg)California Restricted Not legal for sale or use in CaliforniaMounting Hardware Included: YesWarranty Limited Lifetime\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000057636,"sku":"Model #21-853C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-853C.jpg?v=1679274876"},{"product_id":"aem-induction-aem-cold-air-intake-system-acura-integra-1997-2001-1-8l-4-cyl-model-21-412p","title":"AEM Induction AEM Cold Air Intake System Acura Integra 1997-2001 1.8L 4-Cyl","description":"\u003cp\u003eThe AEM 21-412P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra Type R models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-412P vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: MiniClamps Included: 6Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 8 HP @ 4600 RPMHorse Power Increase: 8 HPIntake Pipe Color \/ Finish: PolishedIntake Pipe Inlet Length: 55 in (1397 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 55 in (1397 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKRPM: 4600Street Legal In All US States: YesTitle: AEM AEM-21-412P AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8.3 lb (3.8 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000287012,"sku":"Model #21-412P","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-412P.jpg?v=1679274877"},{"product_id":"aem-induction-aem-cold-air-intake-system-acura-integra-1997-2001-1-8l-4-cyl-model-21-412r","title":"AEM Induction AEM Cold Air Intake System Acura Integra 1997-2001 1.8L 4-Cyl","description":"\u003cp\u003eThe AEM 21-412R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra Type R models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-412R vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 55 in (1397 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 6Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 8 HP @ 4600 RPMHorse Power Increase: 8 HPIntake Pipe Color \/ Finish: RedIntake Pipe Inlet Length: 3 in (76 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 55 in (1397 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKRPM: 4600Street Legal In All US States: YesTitle: AEM AEM-21-412R AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8.3 lb (3.8 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000319780,"sku":"Model #21-412R","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-412R.jpg?v=1679274879"},{"product_id":"aem-induction-aem-cold-air-intake-system-acura-integra-1994-2001-1-8l-4-cyl-model-21-403c","title":"AEM Induction AEM Cold Air Intake System Acura Integra 1994-2001 1.8L 4-Cyl","description":"\u003cp\u003eThe AEM 21-403C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-403C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.5 in (64 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.5 in (64 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 55 in (1397 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.5 in (64 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 55 in (1397 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.5 in (64 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-201DKStreet Legal In All US States: YesTitle: AEM AEM-21-403C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 7.6 lb (3.5 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000352548,"sku":"Model #21-403C","price":386.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-403C.jpg?v=1679274880"},{"product_id":"aem-induction-aem-cold-air-intake-system-acura-integra-1994-2001-1-8l-4-cyl-model-21-403b","title":"AEM Induction AEM Cold Air Intake System Acura Integra 1994-2001 1.8L 4-Cyl","description":"\u003cp\u003eThe AEM 21-403B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-403B vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.5 in (64 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.5 in (64 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: BlueCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: BlueIntake Pipe Inlet Length: 55 in (1397 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.5 in (64 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 55 in (1397 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.5 in (64 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-201DKStreet Legal In All US States: YesTitle: AEM AEM-21-403B AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 7.6 lb (3.5 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Blue (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000418084,"sku":"Model #21-403B","price":386.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-403B.jpg?v=1679274882"},{"product_id":"aem-induction-aem-dual-chamber-intake-system-acura-integra-1994-2001-1-8l-4-cyl-manual-model-24-6003c","title":"AEM Induction AEM Dual Chamber Intake System Acura Integra 1994-2001 1.8L 4-Cyl Manual","description":"\u003cp\u003eThe AEM 24-6003C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Acura Integra models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6003C vehicle applications to determine the legal status for each vehicle.AEM's Performance Dual Chamber Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly with a dual tubed air intake tuned to maximize horsepower and torque.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 4 in (102 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 4 in (102 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 5Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 42 in (1067 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.5 in (64 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 42 in (1067 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.5 in (64 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredOversize Shipping: OS1Package Material: PaperboardPackage Type: BoxProduct Style: AEM Dual Chamber Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-205DKStreet Legal In All US States: YesTitle: AEM AEM-24-6003C AEM Dual Chamber Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 11.3 lb (5.1 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (V2)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000450852,"sku":"Model #24-6003C","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-24-6003C.jpg?v=1679274883"},{"product_id":"aem-induction-aem-dual-chamber-intake-system-acura-integra-1994-2001-1-8l-4-cyl-model-24-6004c","title":"AEM Induction AEM Dual Chamber Intake System Acura Integra 1994-2001 1.8L 4-Cyl","description":"\u003cp\u003eThe AEM 24-6004C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Acura Integra GSR models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6004C vehicle applications to determine the legal status for each vehicle.AEM's Performance Dual Chamber Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly with a dual tubed air intake tuned to maximize horsepower and torque.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 4 in (102 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 4 in (102 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 9Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 41 in (1041 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.75 in (70 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 28 in (711 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 4 in (102 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredOversize Shipping: OS1Package Material: PaperboardPackage Type: BoxProduct Style: AEM Dual Chamber Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-205DKStreet Legal In All US States: YesTitle: AEM AEM-24-6004C AEM Dual Chamber Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 11.8 lb (5.4 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (V2)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000516388,"sku":"Model #24-6004C","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-24-6004C.jpg?v=1679274884"},{"product_id":"aem-induction-aem-cold-air-intake-system-ford-5-0l-v8-model-22-687c","title":"AEM Induction AEM Cold Air Intake System Ford 5.0L V8","description":"\u003cp\u003eThe AEM 22-687C Performance Air Intake System is a free-flowing, mandrel-bent aluminum tube air induction system designed to replace the restrictive factory air filter and air intake tubing while retaining the factory air box on some Ford Mustang GT models. The air intake system comes with a replacement AEM high-flow air filter and a free-flowing aluminum intake tube that easily connects to your vehicle's factory air box and engine throttle body to dramatically increase air flow into your engine. With more air flowing through the custom-tuned intake tube you experience more horsepower and acceleration throughout the engine's RPM range. The intake tube is finished with an attractive and durable gunmetal gray powder-coating that provides a clean, high-performance look under the hood. The AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before servicing is needed (depending on driving conditions). The air intake is designed for easy installation and simply requires one screwdriver to do the job. The intake tube accommodates factory emissions control devices including vacuum and vent hoses where applicable. This air intake system is street legal in all 50 US states and comes with AEM's Lifetime Limited Warranty.AEM's easy-to-install air intake system gives you more power and acceleration by replacing the restrictive factory air filter and air intake tubing while retaining the stock air box. The intake tube has a gunmetal gray powder-coat finish.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 2.281 in (58 mm)Air Filter Material: Cotton GauzeAir Filter Outlet Shape: Not FlangedAir Filter Outlet Width: 10.375 in (264 mm)Air Filter Washable: YesCARB EO Number: D-670-23Clamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: RegularClamps Included: 3Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 9 HP @ 4100 RPMHorse Power Increase: 9 HPIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 22 in (559 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.5 in (89 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 22 in (559 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.5 in (89 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: Filter Is Pre-OiledPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 28-50029RPM: 4100Street Legal In All US States: See Vehicle ApplicationsTitle: AEM AEM-22-687C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 6.3 lb (2.9 kg)Notes:\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000614692,"sku":"Model #22-687C","price":431.99,"currency_code":"USD","in_stock":true}]},{"product_id":"aem-induction-aem-cold-air-intake-system-ford-5-0l-v8-model-21-844c","title":"AEM Induction AEM Cold Air Intake System Ford 5.0L V8","description":"\u003cp\u003eThis Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesCalifornia Restricted: Not legal for sale or use in CaliforniaClamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: Worm GearClamps Included: 3Coupler Color\/Finish: BlackCouplers Included: 1Estimated Horsepower Gain: 20.3 HP @ 4704 RPMHorse Power Increase: 20 HPIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Material: AluminumMass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: CorrugatedPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2057DKRPM: 4704Street Legal In All US States:  NoTitle: AEM AEM-21-844C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 12.6 lb (5.7 kg)Air Box Included: NoAir Filter Color: RedAir Filter Material: Non-woven SyntheticAir Filter Outlet Shape: RoundAir Filter Washable: YesNotes:California Air Resources Board Exempt: No; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000647460,"sku":"Model #21-844C","price":431.99,"currency_code":"USD","in_stock":true}]},{"product_id":"aem-induction-aem-cold-air-intake-system-ford-5-0l-v8-model-21-745c","title":"AEM Induction AEM Cold Air Intake System Ford 5.0L V8","description":"\u003cp\u003eThe AEM 21-745C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang GT models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum\/breather tubes. The tapered oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-745C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.5 in (140 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 1.563 in (40 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.5 in (89 mm)Air Filter Washable: YesCalifornia Restricted: Not legal for sale or use in CaliforniaClamp Color\/Finish: BlackClamp Material: SteelClamp Style: RegularClamps Included: 3Coupler Color\/Finish: BlackCouplers Included: 1Estimated Horsepower Gain: 12 HP @ 4500 RPMHorse Power Increase: 12 HPIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 22 in (559 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.5 in (89 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 22 in (559 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.5 in (89 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2148D-HKRPM: 4500Street Legal In All US States:  NoTitle: AEM AEM-21-745C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 13.2 lb (6 kg)Notes:California Air Resources Board Exempt: No; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880000975140,"sku":"Model #21-745C","price":431.99,"currency_code":"USD","in_stock":true}]},{"product_id":"aem-induction-aem-cold-air-intake-system-ford-mustang-ecoboost-3-7l-v6-2015-2022-model-21-755c","title":"AEM Induction AEM Cold Air Intake System Ford Mustang EcoBoost 3.7L V6 2015-2022","description":"\u003cp\u003eThe AEM 21-755C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine vent lines. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-755C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.5 in (140 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 1.563 in (40 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.5 in (89 mm)Air Filter Washable: YesCARB EO Number: D-670-23Clamp Color\/Finish: NaturalClamp Material: Stainless SteelClamp Style: RegularClamps Included: 3Coupler Color\/Finish: BlackCouplers Included: 1Estimated Horsepower Gain: 8 HP @ 4000 RPMHorse Power Increase: 8 HPIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 17 in (432 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.5 in (89 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 17 in (432 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.5 in (89 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2148DKRPM: 4000Street Legal In All US States: YesTitle: AEM AEM-21-755C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 13.3 lb (6 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-23; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001237284,"sku":"Model #21-755C","price":399.99,"currency_code":"USD","in_stock":true}]},{"product_id":"aem-induction-aem-dual-chamber-intake-system-acura-rsx-2002-2004-2-0l-4-cyl-manual-model-24-6106c","title":"AEM Induction AEM Dual Chamber Intake System Acura RSX 2002-2004 2.0L 4-Cyl Manual","description":"\u003cp\u003eThe AEM 24-6106C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Acura RSX Type-S models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hose, vacuum hose, and intake air temperature sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6106C vehicle applications to determine the legal status for each vehicle.AEM's Performance Dual Chamber Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly with a dual tubed air intake tuned to maximize horsepower and torque.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.5 in (89 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.5 in (89 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 5Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 18.5 HP @ 8000 RPMHorse Power Increase: 19 HPIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 33 in (838 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 24 in (610 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.5 in (89 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Dual Chamber Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-204DKRPM: 8000Street Legal In All US States: YesTitle: AEM AEM-24-6106C AEM Dual Chamber Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8 lb (3.6 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (V2)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001466660,"sku":"Model #24-6106C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-24-6106C.jpg?v=1679274886"},{"product_id":"aem-induction-aem-cold-air-intake-system-acura-rsx-2002-2005-2-0l-4-cyl-manual-model-21-505c","title":"AEM Induction AEM Cold Air Intake System Acura RSX 2002-2005 2.0L 4-Cyl Manual","description":"\u003cp\u003eThe AEM 21-505C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura RSX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the thermal valve hose and inlet air temperature sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-505C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 2.75 in (70 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 2.75 in (70 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Coupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 41 in (1041 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.75 in (70 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 41 in (1041 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 2.75 in (70 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-202DKStreet Legal In All US States: YesTitle: AEM AEM-21-505C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 9 lb (4.1 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001499428,"sku":"Model #21-505C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-505C.jpg?v=1679274887"},{"product_id":"aem-induction-aem-cold-air-intake-system-acura-rsx-2002-2006-2-0l-4-cyl-manual-model-21-506b","title":"AEM Induction AEM Cold Air Intake System Acura RSX 2002-2006 2.0L 4-Cyl Manual","description":"\u003cp\u003eThe AEM 21-506B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura RSX Type-S models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-506B vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: BlueCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: BlueIntake Pipe Inlet Length: 40 in (1016 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 40 in (1016 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-21-506B AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.1 lb (4.6 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Blue (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001532196,"sku":"Model #21-506B","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-506B.jpg?v=1679274889"},{"product_id":"aem-induction-aem-cold-air-intake-system-acura-rsx-2002-2006-2-0l-4-cyl-manual-model-21-506r","title":"AEM Induction AEM Cold Air Intake System Acura RSX 2002-2006 2.0L 4-Cyl Manual","description":"\u003cp\u003eThe AEM 21-506R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura RSX Type-S models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-506R vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: RECoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: RedIntake Pipe Inlet Length: 40 in (1016 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 40 in (1016 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-21-506R AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.1 lb (4.6 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001597732,"sku":"Model #21-506R","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-506R.jpg?v=1679274890"},{"product_id":"aem-induction-aem-short-ram-intake-system-acura-rsx-2002-2006-2-0l-4-cyl-manual-model-22-506b","title":"AEM Induction AEM Short Ram Intake System Acura RSX 2002-2006 2.0L 4-Cyl Manual","description":"\u003cp\u003eThe AEM 22-506B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura RSX Type-S models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor, intake air bypass thermal valve vacuum hose and crankcase breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-506B vehicle applications to determine the legal status for each vehicle.AEM's Performance Short Ram Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly. The intake tube has an attractive yet durable powder-coated finish.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 3Color: BlueCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: BlueIntake Pipe Inlet Length: 35 in (889 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 35 in (889 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Short Ram Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-22-506B AEM Short Ram Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 6 lb (2.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Blue (SRS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001630500,"sku":"Model #22-506B","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-22-506B.jpg?v=1679274892"},{"product_id":"aem-induction-aem-short-ram-intake-system-acura-rsx-2002-2006-2-0l-4-cyl-manual-model-22-506r","title":"AEM Induction AEM Short Ram Intake System Acura RSX 2002-2006 2.0L 4-Cyl Manual","description":"\u003cp\u003eThe AEM 22-506R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura RSX Type-S models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor, intake air bypass thermal valve vacuum hose and crankcase breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-506R vehicle applications to determine the legal status for each vehicle.AEM's Performance Short Ram Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly. The intake tube has an attractive yet durable powder-coated finish.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 3Color: RedCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: RedIntake Pipe Inlet Length: 35 in (889 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 35 in (889 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Short Ram Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-22-506R AEM Short Ram Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 6 lb (2.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (SRS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001663268,"sku":"Model #22-506R","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-22-506R.jpg?v=1679274894"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-s2000-2006-2009-2-2l-4-cyl-model-21-690p","title":"AEM Induction AEM Cold Air Intake System Honda S2000 2006-2009 2.2L 4-Cyl","description":"\u003cp\u003eThe AEM 21-690P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-690P vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 7 in (178 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.25 in (83 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.25 in (83 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 8Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 7.67 HP @ 7300 RPMHorse Power Increase: 8 HPIntake Pipe Color \/ Finish: PolishedIntake Pipe Inlet Length: 18 in (457 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.25 in (83 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 18 in (457 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.25 in (83 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2113DKRPM: 7300Street Legal In All US States: YesTitle: AEM AEM-21-690P AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.8 lb (4.9 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001728804,"sku":"Model #21-690P","price":584.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-690P.jpg?v=1679274897"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-s2000-2006-2009-2-2l-4-cyl-model-21-690c","title":"AEM Induction AEM Cold Air Intake System Honda S2000 2006-2009 2.2L 4-Cyl","description":"\u003cp\u003eThe AEM 21-690C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-690C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 7 in (178 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.25 in (83 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.25 in (83 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 8Coupler Color\/Finish: Not ApplicableCouplers Included: NoneEstimated Horsepower Gain: 7.67 HP @ 7300 RPMHorse Power Increase: 8 HPIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 18 in (457 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.25 in (83 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 18 in (457 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.25 in (83 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2113DKRPM: 7300Street Legal In All US States: YesTitle: AEM AEM-21-690C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.8 lb (4.9 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001761572,"sku":"Model #21-690C","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-690C.jpg?v=1679274898"},{"product_id":"aem-induction-aem-dual-chamber-intake-system-honda-s2000-2000-2005-model-24-6104c","title":"AEM Induction AEM Dual Chamber Intake System Honda S2000 2000-2005","description":"\u003cp\u003eThe AEM 24-6104C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda S2000 models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hose, vacuum hose, and air control solenoid. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6104C vehicle applications to determine the legal status for each vehicle.AEM's Performance Dual Chamber Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly with a dual tubed air intake tuned to maximize horsepower and torque.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.5 in (89 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.5 in (89 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 28 in (711 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 2.75 in (70 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 42 in (1067 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.5 in (89 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Dual Chamber Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-204DKStreet Legal In All US States: YesTitle: AEM AEM-24-6104C AEM Dual Chamber Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 10.3 lb (4.7 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (V2)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001794340,"sku":"Model #24-6104C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-24-6104C.jpg?v=1679274899"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-s2000-2000-2003-2-0l-4-cyl-model-21-504c","title":"AEM Induction AEM Cold Air Intake System Honda S2000 2000-2003 2.0L 4-Cyl","description":"\u003cp\u003eThe AEM 21-504C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including replacement breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-504C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 33 in (838 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 42 in (1067 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-21-504C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 7 lb (3.2 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880001827108,"sku":"Model #21-504C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-504C.jpg?v=1679274901"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-s2000-2000-2003-2-0l-4-cyl-model-21-504p","title":"AEM Induction AEM Cold Air Intake System Honda S2000 2000-2003 2.0L 4-Cyl","description":"\u003cp\u003eThe AEM 21-504P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable mirror-polished powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including replacement breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-504P vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: PolishedCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: PolishedIntake Pipe Inlet Length: 33 in (838 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 42 in (1067 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-21-504P AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 8.3 lb (3.8 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880002056484,"sku":"Model #21-504P","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-504P.jpg?v=1679274902"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-s2000-2000-2003-2-0l-4-cyl-model-21-504r","title":"AEM Induction AEM Cold Air Intake System Honda S2000 2000-2003 2.0L 4-Cyl","description":"\u003cp\u003eThe AEM 21-504R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including replacement breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-504R vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.125 in (130 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3 in (76 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3 in (76 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 7Color: RedCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: RedIntake Pipe Inlet Length: 33 in (838 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3 in (76 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 42 in (1067 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3 in (76 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-203DKStreet Legal In All US States: YesTitle: AEM AEM-21-504R AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 7 lb (3.2 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880002089252,"sku":"Model #21-504R","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-504R.jpg?v=1679274904"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-s2000-2004-2005-2-2l-4-cyl-model-21-514c","title":"AEM Induction AEM Cold Air Intake System Honda S2000 2004-2005 2.2L 4-Cyl","description":"\u003cp\u003eThe AEM 21-514C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including replacement breather and vacuum hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-514C vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.25 in (83 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.25 in (83 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 6Color: Gunmetal GrayCoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: Gunmetal GrayIntake Pipe Inlet Length: 41 in (1041 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.25 in (83 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 48 in (1219 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.25 in (83 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2110DKStreet Legal In All US States: YesTitle: AEM AEM-21-514C AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 9 lb (4.1 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880002122020,"sku":"Model #21-514C","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-514C.jpg?v=1679274905"},{"product_id":"aem-induction-aem-cold-air-intake-system-honda-s2000-2004-2005-2-2l-4-cyl-model-21-514r","title":"AEM Induction AEM Cold Air Intake System Honda S2000 2004-2005 2.2L 4-Cyl","description":"\u003cp\u003eThe AEM 21-514R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including replacement breather and vacuum hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-514R vehicle applications to determine the legal status for each vehicle.AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.FeaturesAir Box Included: NoAir Filter Color: RedAir Filter Height: 5.25 in (133 mm)Air Filter Large End Diameter: 6 in (152 mm)Air Filter Material: Non-woven SyntheticAir Filter Outlet Length: 3.25 in (83 mm)Air Filter Outlet Shape: RoundAir Filter Outlet Width: 3.25 in (83 mm)Air Filter Washable: YesCARB EO Number: D-670-15Clamp Color\/Finish: NaturalClamp Material: SteelClamp Style: RegularClamps Included: 6Color: RECoupler Color\/Finish: Not ApplicableCouplers Included: NoneIntake Pipe Color \/ Finish: RedIntake Pipe Inlet Length: 41 in (1041 mm)Intake Pipe Inlet Shape: RoundIntake Pipe Inlet Width: 3.25 in (83 mm)Intake Pipe Material: AluminumIntake Pipe Outlet Length: 48 in (1219 mm)Intake Pipe Outlet Shape: RoundIntake Pipe Outlet Width: 3.25 in (83 mm)Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When RequiredMounting Hardware Included: YesOil Included: No Filter Oil RequiredPackage Material: PaperboardPackage Type: BoxProduct Style: AEM Cold Air Intake SystemProp 65 (C, R or CR): CRProp 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.govProp 65 Warning Label: https:\/\/www.knfilters.com\/images\/l\/prop65.jpgProp 65 Yes\/No: YesReplacement Filter: 21-2110DKStreet Legal In All US States: YesTitle: AEM AEM-21-514R AEM Cold Air Intake SystemTUV Approved (Europe): NoWarranty: Limited LifetimeWeight: 9 lb (4.1 kg)Notes:California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (CAS)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":44880002154788,"sku":"Model #21-514R","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AEM-21-514R.jpg?v=1679274907"},{"product_id":"afe-track-series-stage-2-carbon-fiber-intake-system-w-pro-dry-s-media-chevrolet-camaro-ss-16-20-v8-6-2l-model-57-10005d","title":"aFe Track Series Stage-2 Carbon Fiber Intake System w\/ Pro DRY S Media Chevrolet Camaro SS 16-20 V8-6.2L","description":"\u003cp\u003eThe Track Series' open-element design produces an aggressive sound, fit for a muscle car.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Dyno-Proven Gains up to +10 HP and +9 Lbs. x Ft. TQOutflows Factory Intake by 28%Measured Flow: 710 CFM @ 7\" H2O100% Twill Weave Carbon Fiber Intake Tube with Lightweight 5052-H32 Aluminum Powder-Coated Heat ShieldAggressive Open-Element Design Allows for Easy Inspection of Air FilterWashable and Reusable Pro DRY S Air Filter for Maximum ConvenienceUtilizes Factory Mounting Locations for a Fast and Easy Installation (Roughly 15 Minutes)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe57-10005D\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002220324,"sku":"Model #57-10005D","price":931.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/57-10005D.jpg?v=1679274908"},{"product_id":"afe-track-series-stage-2-carbon-fiber-intake-system-w-pro-5r-media-chevrolet-camaro-ss-16-20-v8-6-2l-model-57-10005r","title":"aFe Track Series Stage-2 Carbon Fiber Intake System w\/ Pro 5R Media Chevrolet Camaro SS 16-20 V8-6.2L","description":"\u003cp\u003eThe Track Series' open-element design produces an aggressive sound, fit for a muscle car.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:Dyno-Proven Gains up to +13 HP and +12 Lbs. x Ft. TQOutflows Factory Intake by 37%Measured Flow: 760 CFM @ 7\" H2O100% Twill Weave Carbon Fiber Intake Tube with Lightweight 5052-H32 Aluminum Powder-Coated Heat ShieldAggressive Open-Element Design Allows for Easy Inspection of Air FilterWashable and Reusable Pro 5R Air Filter for Maximum PerformanceUtilizes Factory Mounting Locations for a Fast and Easy Installation (Roughly 15 Minutes)\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe57-10005R\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002253092,"sku":"Model #57-10005R","price":931.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/57-10005R.jpg?v=1679274910"},{"product_id":"afe-power-54-74214-momentum-gt-pro-5r-cold-air-intake-system-chevrolet-camaro-zl1-17-18-v8-6-2l-sc-model-54-74214","title":"aFe Power 54-74214 Momentum GT Pro 5R Cold Air Intake System Chevrolet Camaro ZL1 17-18 V8-6.2L (sc)","description":"\u003cp\u003eCreate even more power out of the Camaro ZL1 with the Momentum GT Pro 5R Cold Air Intake! This system allows for maximum airflow, performance gains, and filtration, outflowing stock by 11%! The Pro 5R filter consists of an oiled 5-layer mesh cotton gauze media for maximum performance and filtration. The Pro 5R maintains a 98.6% efficiency rating, allowing high air flow and optimal performance even when dirty.\u003c\/p\u003e\n\n\u003cp\u003eUnique One-Piece High Quality Housing W\/ Sight Window:\u003c\/p\u003e \n\n\u003cp\u003eA custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the airbox.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Tube:\u003c\/p\u003e \n\n\u003cp\u003eThis system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.\u003c\/p\u003e \n\n\u003cp\u003eLarge 5-Layer Performance Air Filter:\u003c\/p\u003e \n\n\u003cp\u003eThis Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\n\u003cp\u003ePremium Hardware:\u003c\/p\u003e \n\n\u003cp\u003ePremium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e \n\n\u003cp\u003eNote: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:550 CFM Rating @ 7\" H2O+24 HP and +25 lbs. x ft. Torque max gainsOutflows factory intake by up to 11%High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air InletCAD-Designed Roto-Molded Intake TubeBuilt-In Sight Window Provides Easy Inspection of Filter Without DisassemblyScoop snaps into airbox and directs cool air into intake system for maximum performance and hassle-free installationPro 5R pre-oiled, washable\/reusable air filter for maximum performanceUnique Filter-to-Housing Interface for Easy InstallationNo Cutting or Drilling on Factory Parts for Faster Installation\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe54-74214\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002285860,"sku":"Model #54-74214","price":661.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AFE_54-74214.jpg?v=1679274911"},{"product_id":"afe-power-51-74214-momentum-gt-pro-dry-s-cold-air-intake-system-chevrolet-camaro-zl1-17-18-v8-6-2l-sc-model-51-74214","title":"aFe Power 51-74214 Momentum GT Pro DRY S Cold Air Intake System Chevrolet Camaro ZL1 17-18 V8-6.2L (sc)","description":"\u003cp\u003eCreate even more power out of the Camaro ZL1 with the Momentum GT Pro DRY S Cold Air Intake! This system allows for maximum airflow, performance gains, and filtration, outflowing stock by 4%! The Pro DRY S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned.\u003c\/p\u003e\n\n\u003cp\u003eUnique One-Piece High Quality Housing W\/ Sight Window:\u003c\/p\u003e \n\n\u003cp\u003eA custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the airbox.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Tube:\u003c\/p\u003e \n\n\u003cp\u003eThis system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.\u003c\/p\u003e \n\n\u003cp\u003eLarge 3-Layer Performance Air Filter:\u003c\/p\u003e \n\n\u003cp\u003eThis Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\n\u003cp\u003ePremium Hardware:\u003c\/p\u003e \n\n\u003cp\u003ePremium stainless steel T-bolt clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e \n\n\u003cp\u003eNote: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:550 CFM Rating @ 7\" H2O+24 HP and +25 lbs. x ft. Torque max gainsOutflows factory intake by up to 4%High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air InletCAD-Designed Roto-Molded Intake Tube Built-In Sight Window Provides Easy Inspection of Filter Without DisassemblyScoop snaps into air box and directs cool air into intake system for maximum performance and hassle-free installationPro DRY S oil-free 3-Layer Synthetic Media for Maximum ConvenienceUnique Filter-to-Housing Interface for Easy InstallationNo Cutting or Drilling on Factory Parts for Faster Installation\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe51-74214\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002318628,"sku":"Model #51-74214","price":661.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AFE_51-74214.jpg?v=1679274913"},{"product_id":"afe-power-51-74210-momentum-gt-pro-dry-s-cold-air-intake-system-chevrolet-camaro-ss-16-20-v8-6-2l-model-51-74210","title":"aFe Power 51-74210 Momentum GT Pro DRY S Cold Air Intake System Chevrolet Camaro SS 16-20 V8-6.2L","description":"\u003cp\u003eUnique One-Piece High Quality Housing W\/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation. This tube has a built-in resonance chamber to catch un-wanted air intake noises.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Scoop: A high quality CAD air scoop guides cool ambient air to the performance air filter.\u003c\/p\u003e\n\n\u003cp\u003eLarge 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\n\u003cp\u003ePremium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone elbow coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e \n\n\u003cp\u003eNote: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\n\u003cp\u003eFeatures: +9 HP \/ +11 lbs. x ft. Torque max gainsOutflows factory intake by 14%High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air InletCAD-Designed Roto-Molded Intake Tube w\/ Resonance ChamberBuilt-In Sight Window Provides Easy Inspection of Filter Without DisassemblyScoop snaps into air box and directs cool air into intake system for maximum performance and hassle-free installationPro Dry S Oil-Free washable\/reusable Filter For Maximum ConvenienceUnique Filter-to-Housing Interface for Easy InstallationNo Cutting or Drilling on OEM Parts for Faster Installation\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe51-74210\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002351396,"sku":"Model #51-74210","price":600.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AFE_51-74210.jpg?v=1679274914"},{"product_id":"afe-power-54-74210-momentum-gt-pro-5r-cold-air-intake-system-chevrolet-camaro-ss-16-20-v8-6-2l-model-54-74210","title":"aFe Power 54-74210 Momentum GT Pro 5R Cold Air Intake System Chevrolet Camaro SS 16-20 V8-6.2L","description":"\u003cp\u003eUnique One-Piece High Quality Housing W\/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation. This tube has a built-in resonance chamber to catch un-wanted air intake noises.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Scoop: A high quality CAD air scoop guides cool ambient air to the performance air filter.\u003c\/p\u003e\n\n\u003cp\u003eLarge 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\n\u003cp\u003ePremium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone elbow coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e \n\n\u003cp\u003eNote: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:+9 HP \/ +11 lbs. x ft. Torque max gainsOutflows factory intake by 14%High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air ScoopCAD-Designed Roto-Molded Intake Tube w\/ Resonance ChamberBuilt-In Sight Window Provides Easy Inspection of Filter Without DisassemblyScoop snaps into air box and directs cool air into intake system for maximum performance and hassle-freeinstallationPro 5R pre-oiled, washable\/reusable air filter for maximum performanceUnique Filter-to-Housing Interface for Easy InstallationNo Cutting or Drilling on OEM Parts for Faster Installation\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe54-74210\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002384164,"sku":"Model #54-74210","price":600.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AFE_54-74210.jpg?v=1679274916"},{"product_id":"afe-momentum-gt-cold-air-intake-system-w-pro-dry-s-media-chevrolet-camaro-v6-3-6l-16-20-model-51-74211","title":"aFe Momentum GT Cold Air Intake System w\/ Pro DRY S Media Chevrolet Camaro V6-3.6L 16-20","description":"\u003cp\u003eThis Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This Pro DRY S air filter has a large 6-3\/4\" x 4-3\/4\" flange and is 9\" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic \"oil-free\" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Two CNC machined, high quality billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:+11 HP \/ +15 lbs. x ft. Torque max gainsOutflows factory intake by 30%Pro DRY S Oil-Free washable\/reusable Filter For Maximum ConvenienceUnique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)Fitment:Chevrolet Camaro V6-3.6L 16-20Note(s):This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\n\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe51-74211\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002449700,"sku":"Model #51-74211","price":585.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/51-74211.jpg?v=1679274918"},{"product_id":"afe-power-51-74212-momentum-gt-pro-dry-s-cold-air-intake-system-chevrolet-camaro-16-20-i4-2-0l-t-model-51-74212","title":"aFe Power 51-74212 Momentum GT Pro DRY S Cold Air Intake System Chevrolet Camaro 16-20 I4-2.0L (t)","description":"\u003cp\u003eUnique One-Piece High Quality Housing W\/ Sight Window:\u003c\/p\u003e \n\n\u003cp\u003eA custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet. (US PAT 9440175) For Filter-to-Housing Interface.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Tube:\u003c\/p\u003e \n\n\u003cp\u003eThis system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Scoop:\u003c\/p\u003e \n\n\u003cp\u003eA high quality CAD air scoop guides cool ambient air to the performance air filter.\u003c\/p\u003e \n\n\u003cp\u003eLarge 3-Layer Performance Air Filter:\u003c\/p\u003e \n\n\u003cp\u003eThis Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\n\u003cp\u003ePremium Hardware:\u003c\/p\u003e \n\n\u003cp\u003ePremium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e \n\n\u003cp\u003eNote: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:+24 HP and +25 lbs. x ft. Torque max gainsOutflows factory intake by 21%High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air InletCAD-Designed Roto-Molded Intake TubeBuilt-In Sight Window Provides Easy Inspection of Filter Without DisassemblyScoop snaps into air box and directs cool air into intake system for maximum performance and hassle-free installationPro DRY S Oil-Free washable\/reusable Filter For Maximum ConvenienceUnique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)No Cutting or Drilling on Factory Parts for Faster Installation\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe51-74212\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002482468,"sku":"Model #51-74212","price":585.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AFE_51-74212.jpg?v=1679274919"},{"product_id":"afe-power-54-74211-momentum-gt-pro-5r-cold-air-intake-system-chevrolet-camaro-16-20-v6-3-6l-model-54-74211","title":"aFe Power 54-74211 Momentum GT Pro 5R Cold Air Intake System Chevrolet Camaro 16-20 V6-3.6L","description":"\u003cp\u003eUnique One-Piece High Quality Housing W\/ Sight Window:\u003c\/p\u003e \n\n\u003cp\u003eA custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet. (US PAT 9440175) For Filter-to-Housing Interface.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Tube:\u003c\/p\u003e \n\n\u003cp\u003eThis system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation.\u003c\/p\u003e\n\n\u003cp\u003eHigh Quality Scoop:\u003c\/p\u003e \n\n\u003cp\u003eA high quality CAD air scoop guides cool ambient air to the performance air filter.\u003c\/p\u003e \n\n\u003cp\u003eLarge 5-Layer Performance Air Filter:\u003c\/p\u003e \n\n\u003cp\u003eThis Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\n\u003cp\u003ePremium Hardware:\u003c\/p\u003e \n\n\u003cp\u003ePremium stainless steel T-bolt clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e \n\n\u003cp\u003eNote: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:+15 HP \/ +11 lbs. x ft. Torque max gainsOutflows factory intake by 31%High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air InletCAD-Designed Roto-Molded Intake TubeBuilt-In Sight Window Provides Easy Inspection of Filter Without DisassemblyScoop snaps into air box and directs cool air into intake system for maximum performance and hassle-free installationPro 5R pre-oiled, washable\/reusable air filter for maximum performanceUnique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)No Cutting or Drilling on Factory Parts for Faster Installation\u003c\/p\u003e\u003cbr\u003e\n                        \n\n                        \u003cbr\u003e\n                                                    \u003cbr\u003e\n                                \u003cp\u003eOther Part Numbers:\u003c\/p\u003e\n\n                                                                    \u003cp\u003eAFE #afe54-74211\u003c\/p\u003e\n\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                \u003cbr\u003e\n                                                            \u003cbr\u003e\n                        \u003cbr\u003e\n                        \u003cbr\u003e\n                            \u003cp\u003eProposition 65\u003cbr\u003e\n                            \u003cbr\u003e\n                                \u003cbr\u003e\n                                    WARNING:  Cancer and Reproductive Harm\u003cbr\u003e\n                                \u003cbr\u003e\n                                    https:\/\/www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":44880002777380,"sku":"Model #54-74211","price":585.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/products\/AFE_54-74211.jpg?v=1679274922"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/7207\/7604\/collections\/pngegg_6.png?v=1672657461","url":"https:\/\/www.built2race.com\/collections\/air-intakes-exhausts.oembed?page=15","provider":"Built2Race","version":"1.0","type":"link"}